Sharp PN-K321 - Manuals - manualsarea.com

Page 3 - IMPORTANT INFORMATION; RISK OF ELECTRIC; CAUTION

3 E IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFI...

Page 5 - Especially for child safety

5 E SAFETY PRECAUTIONS (Continued) WARNING: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures. To maintain compliance with EMC regulations, use shielded cables to connect to the foll...

Page 6 - TIPS AND SAFETY INSTRUCTIONS

6 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness....

Page 7 - MOUNTING PRECAUTIONS

7 E MOUNTING PRECAUTIONS • This product is for use indoors.• A mounting bracket compliant with VESA specifications is required. • To install on a stand (commercially available) or on a wall, or to remove or move the monitor, consult your dealer. • Mounting the monitor on the wall requires special ex...

Page 9 - Front view; Part Names; Rear view

9 E n Front view 1 2 1. LCD panel 2. Power LED (See page 15.) Part Names n Rear view 1 2 45 6 78 9 2 3 12 11 10 13 14 15 16 17 18 19 1. Speakers 2. Vents 3. Attachment plate (for stand) 4. RS-232C input terminal (See page 12.) 5. PC/AV HDMI 1 input terminal (See page 12.) 6. PC/AV HDMI 2 input termi...

Page 10 - Attaching the stand

10 E Installing the stand (supplied) Caution • Disconnect all cables from the monitor. • Firmly tighten the installation screws (supplied) with the hex wrench (supplied). • Ensure that you have sufficient space to work. n Attaching the stand Remove all packaging materials before starting work. To pr...

Page 11 - Height/angle adjustment

11 E n Height/angle adjustment • Adjusting the height Adjust to a height that is easy to view. Approx. 5-29/32inch (15cm) TIPS • The height cannot be adjusted in a vertical installation. • Adjusting the angle Adjust to an angle that is easy to view. Approx.45° Approx.25° Approx.5° Approx.45° Caution...

Page 12 - Connecting Peripheral Equipment; Input mode; Connection with a PC or AV equipment

12 E Connecting Peripheral Equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output termi...

Page 13 - Connecting the Power Cord

13 E Connecting the Power Cord Caution • Use only the power cord and AC adapter supplied with the monitor. 1. Turn off the main power switch. 2. Connect the AC adapter (supplied) to the power cord (supplied). 3. Connect the AC adapter (supplied) to the AC input terminal. 4. Plug of the power cord (s...

Page 14 - Binding Cables; Fastening the cables

14 E Binding Cables n Fastening the cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Attach the cable clamps to the attachment parts on the back of the monitor and the stand, and bind the cables. Cable clamp Cable clamp attachment Cable Ca...

Page 15 - Turning on the main power

15 E Caution • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch...

Page 16 - Basic Operation

16 E Basic Operation 1 2 3 4 5 6 7 1. Power button ( ) Press this button to turn the power ON/OFF. 2,3. Brightness adjustment button ( / ) The brightness menu appears. B R I G H T 15 Adjust the brightness with the brightness adjustment button ( / ). * If you do not press any buttons for about 4 seco...

Page 18 - Menu Items; Displaying the menu screen; Example of operation; Menu screen display

18 E Menu Items Displaying the menu screen Video adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 19 to 21 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being displayed. Do...

Page 19 - Menu item details; PICTURE

19 E Menu item details The menu will differ depending on the input mode. n PICTURE BRIGHT Adjusts the backlight brightness. CONTRAST Adjusts the difference between the bright and dark portions of the image. BLACK LEVEL Adjusts the entire brightness of the video signals. TINT Adjusts the hue. Selecti...

Page 22 - HDMI DUAL

22 E Menu Items n Dual screen display Two screens can be displayed by selecting PbyP mode. Set this function with “PbyP MODE” in the PbyP menu. PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line. * The currently selected input signal is displayed on the main screen. *...

Page 24 - Command format

24 E Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC. PC connection Connect the COM port on the PC (RS-232C connector) to the CONTROL terminal (RS-232C input terminal) on the monitor using the RS-232C conversion cable (supplied) and...

Page 25 - Response code format; Communication interval

25 E Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed. When a command has not been executed R R E Return code (0D H , 0A H ) TIPS • “ERR” is returned when th...

Page 26 - RS-232C command table; Power control/Input mode selection

26 E RS-232C command table How to read the command table Command: Command field (See page 24.) Direction: W When the “Parameter” is set in the parameter field (See page 24.), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obt...

Page 27 - PICTURE menu

27 E PICTURE menu Function Command Direction Parameter Reply Control/Response contents * BRIGHT VLMP WR 0-31 0-31 - CONTRAST CONT WR 0-60 0-60 BLACK LEVEL BLVL WR 0-60 0-60 TINT TINT WR 0-60 0-60 COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0-24 0-24 COLOR ADJUSTMENT COLOR MODE BMOD WR 0 0 STD - 2 2 V...

Page 30 - Troubleshooting

30 E Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Are the AC adapter and power cord properly connected? (See page 13.) • Is the main power switch off? (See page 15....

Page 31 - Product Specifications

31 E Specifications n Product Specifications Model PN-K321 LCD component 32" Class [31-35/64 inch (80.1cm) diagonal] TFT LCD Max. resolution (pixels) 3840 x 2160 Max. colors Approx. 1.07 billion colors Pixel pitch 0.182 mm (H) × 0.182 mm (V) Viewing angle 176 ° right/left/up/down (contrast ratio...

Page 34 - Power management

34 E n Compatible signal timing (AV) Screen resolution Frequency HDMI 1920 × 1080p 24Hz Yes 50Hz Yes 59.94Hz Yes 60Hz Yes 1920 × 1080i 50Hz Yes 59.94Hz Yes 60Hz Yes 1280 × 720p 50Hz Yes 59.94Hz Yes 60Hz Yes 720 × 576p 50Hz Yes 720 × 480p 59.94Hz Yes 60Hz Yes 640 × 480p(VGA) 59.94Hz Yes 60Hz Yes 720(...

Page 35 - DisplayPort input terminal pins; PC/AV HDMI input terminal pins

35 E n DisplayPort input terminal pins (DisplayPort 20 pin) No. Function No. Function 1 MainLane 3- 11 Gnd 2 Gnd 12 MainLane 0+ 3 MainLane 3+ 13 Gnd 4 MainLane 2- 14 Gnd 5 Gnd 15 Aux+ 6 MainLane 2+ 16 Gnd 7 MainLane 1- 17 Aux- 8 Gnd 18 Hot-plug detection 9 MainLane 1+ 19 Gnd 10 MainLane 0- 20 3.3V n...

Page 36 - Removing the attachment plate; Toppling prevention

36 E • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be neces...