Sharp PN-H701 - Manuals - manualsarea.com

Page 3 - IMPORTANT INFORMATION; RISK OF ELECTRIC; CAUTION

3 E IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFI...

Page 4 - SAFETY PRECAUTIONS; DEAR SHARP CUSTOMER

4 E Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause pe...

Page 5 - Especially for child safety

5 E SAFETY PRECAUTIONS (Continued) 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • Use the specif...

Page 6 - IMPORTANT SAFETY INSTRUCTIONS

6 E 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install...

Page 7 - TIPS AND SAFETY INSTRUCTIONS

7 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness....

Page 8 - MOUNTING PRECAUTIONS; For the monitor in landscape orientation; For the monitor in portrait orientation

8 E MOUNTING PRECAUTIONS • This product is for use indoors.• A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the w...

Page 9 - Setting the USB flash drive cover

9 E Supplied Components If any component should be missing, please contact your dealer.  Liquid Crystal Display Monitor: 1  Remote control unit: 1  Cable clamp: 4  Cable clamp (insertion type): 2  Power cord: 1  LR-6 battery (“AA” size): 2  CD-ROM (Utility Disk for Windows): 1  Setup Manual:...

Page 10 - Front view; Part Names; Rear view; USB flash drive cover

10 E n Front view 2 3 4 5 1 Accessing the operation panel 1. LCD panel 2. Remote control sensor (See page 16. ) 3. Input switch (See page 18. ) 4. Power switch (See page 17. ) 5. Power LED (See page 17.) TIPS • Use a pointed object such as a pen tip to press the switches. Part Names n Rear view 11 1...

Page 11 - Signal transmitter

11 E Part Names n Remote control unit 1 23 4 5 6 11 8 7 9 10 1. Signal transmitter 2. POWER button (See page 17.) 3. MUTE button (See page 18.) 4. VOL +/- buttons (See page 18.) Cursor control ( / / / ) buttons 5. DISPLAY/F1 button (See page 18.) 6. MODE/F2 button (See page 18.) 7. INPUT button (See...

Page 12 - Connecting Peripheral Equipment; Connection with a PC or AV equipment; HDMI1 input terminal

12 E 8 6 1 2 3 4 7 9 10 5 11 Connecting Peripheral Equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input termin...

Page 13 - Supported USB flash drives

13 E Connecting Peripheral Equipment • Compatible audio signals - Type: Linear PCM (2 ch), AAC, Dolby Digital - Sampling frequency: 48kHz / 44.1kHz / 32kHz • Use an HDMI cable connector with the following dimensions: Thickness: 1/2 inch (12 mm) or less 5. PC D-sub input terminal • When using the aud...

Page 14 - Binding Cables; Connecting the Power Cord

14 E Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Cable clamp (insertion type) Cable *1 *2 *1 *1 *1 *1 *1 *1 *1 *1 *2 *2 *2 Cable clamp attachment Cable clamp Cable Power cord (Supplied) Power cord clamp screw Power cord clamp ...

Page 15 - Insert the USB flash drive into the USB port.; Attach the USB flash drive cover and secure with the

15 E Setting the USB flash drive cover 1. Insert the USB flash drive into the USB port. USB port 2. Attach the USB flash drive cover and secure with the provided screw. USB flash drive cover screw Caution • Do not tighten the screw excessively. Excessive tightening may damage the monitor. TIPS • If ...

Page 16 - Preparing the Remote Control Unit; Installing the batteries; Remote control operation range; Operation panel in; Operation panel out

16 E Preparing the Remote Control Unit Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the supplied batteries (LR-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Clo...

Page 17 - Turning on the main power; Status; Disabling power on/off operations

17 E Caution • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch...

Page 18 - Basic Operation

18 E Basic Operation 1 2 34 9 7 8 6 5 1. INPUT (Input mode selection) The men u is displayed. Press or to select the input mode, and press ENTER to enter. * You can select the input mode that shows SELECTABLE.* You can select the input mode by pressing the input switch of the monitor. Video and audi...

Page 19 - NORMAL; DOT BY DOT; UNDERSCAN; ZOOM

19 E Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. NORMAL Displays image so it fills the screen without changing the aspect ratio of the input signals. WIDE Displays image so it fills the entire screen...

Page 20 - Supported formats; Photo files; Video files; Play files in a USB flash drive; Play files in internal memory; Select the media from which the file will play; Select the media with; Playing files

20 E You can play photo, music, and video files in a USB flash drive connected to the monitor, or photo files in internal memory. For information on USB flash drive, see page 13. n Supported formats The types of files that can be played are as follows. The operation of formats not indicated in the t...

Page 21 - Playing music files in slide show; Copy photo files to internal memory

21 E n Playing files For the actions that you can take in each screen, see page 22 to 23. 1. Select the type of file to be played with or , and press ENTER . 2. Select the folder with or , and press ENTER . 3. Select and play the file. Photo files • To play a file, select the file with , , or and pr...

Page 22 - Auto playback; Operations during play

22 E Playing files n Delete multiple photo files from internal memory 1. Set the media to INTERNAL MEMORY. (See page 20.)2. Select PHOTO with or and press ENTER . 3. Select the folder that contains file you want to delete with or , and press ENTER . 4. Press DISPLAY (F1), select DELETE PHOTE with or...

Page 23 - Function menu; Photo file is selected; Single photo file is displayed / Playing slideshow; Music files; Video file is selected

23 E Function menu Press DISPLAY (F1) while each screen is displayed. Select an item with or and press ENTER . n Photo files Photo file is selected VOLUME SETTING Adjust the volume with or . COPY PHOTO Copy photo files from a USB flash drive to the internal memory. (See page 21.) DELETE PHOTO Delete...

Page 24 - Menu Items; Displaying the menu screen; Example of operation; to select PICTURE, and press; MENU; Menu screen display; MENU

24 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 25 to 28 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being dis...

Page 25 - Menu item details

25 E Menu item details The menu will differ depending on the input mode and the items that can be set vary depending on the mode. n PICTURE PICTURE MODE Changes the picture mode on the screen. The picture mode on the screen can also be changed using a remote control unit. (See page 18.) BRIGHT Adjus...

Page 26 - MULTI PIXEL DRIVE; AUDIO; BAND EXTENSION

26 E ADVANCEDQUICK SHOOT ADVANCED(HIGH), ADVANCED(LOW) ......................... Using interpolation, this shows video that is normally shown at 60 frames/sec at 120 frames/sec for a smoother picture. However, this may distort the picture of some videos. In this case, set to STANDARD or OFF. STANDAR...

Page 27 - LANGUAGE

27 E Menu Items n SETUP LANGUAGE Sets the display language for the menu screen. SLEEP TIMER When the set time elapses, the monitor automatically enters standby mode. This can be set to up to 23 hours in increments of one hour. INPUT SELECTHDMI SETTING HDMI CEC LINK .....................................

Page 28 - OTHERS

28 E Menu Items COMMUNICATION SETTINGLAN SETUP Configures the settings to control the monitor from the computer via LAN. (See page 36.) IP CONTROL SETUP To control the monitor from a computer via LAN, set this to ENABLE and configure the login ID and other settings. (See page 37.) n MONITOR MONITOR ...

Page 29 - Character input; Automatic adjustment; Switch the input to D-SUB and display the adjustment; Screen display for adjustment; Opening the adjustment pattern

29 E Menu Items Character input For items that require entry of text, press ENTER to display the software keyboard.Select a character with , and press ENTER to enter. • To change the characters entered, select CHAR. SET or press DISPLAY (F1). • To switch between upper case and lower case, select CAP...

Page 30 - While “F” appears, press; Functional Restriction Setting (FUNCTION)

30 E You can restrict operations. 1. Hold SIZE down until “F” appears in the left of the screen. 2. While “F” appears, press , , , in that order. [OFF][OFF][OFF][OFF][ON 1][ON][OFF] FUNCTIONPOWER BUTTON LOCKRC LOCKMONITOR LOCKMENU LOCKON SCREEN DISPLAYLEDPORTRAIT ROTATE SELECT ENTER ENTER EXIT RETUR...

Page 31 - PC connection; Communication conditions; Command format

31 E Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC. TIPS • You cannot use RS-232C and LAN control simultaneously. PC connection Connect the COM port on the PC (RS-232C connector) to the CONTROL terminal (RS-232C input terminal) on...

Page 32 - Response code format; When a command has been executed correctly; When a command has not been executed; Communication interval

32 E Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed. When a command has not been executed R R E Return code (0D H , 0A H ) TIPS • “ERR” is returned when th...

Page 33 - Control command table; How to read the command table; Power control/Input mode selection; PICTURE menu

33 E Control command table How to read the command table Command: Command field (See page 31.) Direction: W When the “Parameter” is set in the parameter field (see page 31), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obta...

Page 34 - MONITOR menu

34 E AUDIO menu Function Command Direction Parameter Reply Control/Response contents BALANCE SBAL WR -30-30 -30-30 Audio output balance (Left 30 to right 30) SETUP menu Function Command Direction Parameter Reply Control/Response contents LANGUAGE LANG WR 14 14 ENGLISH 1 1 DEUTSCH 2 2 FRANÇAIS 3 3 IT...

Page 35 - Others

35 E Others Function Command Direction Parameter Reply Control/Response contents SCREEN SIZE WIDE W 0-1, 4-5, 8-9 0: Toggle change, 1: NORMAL, 4: ZOOM, 5: WIDE, 8: UNDERSCAN, 9: DOT BY DOT R 1, 4-5, 8-9 1: NORMAL, 4: ZOOM, 5: WIDE, 8: UNDERSCAN, 9: DOT BY DOT VOLUME VOLM WR 0-100 0-100 Remote contro...

Page 36 - Settings to connect to a LAN; LAN SETUP

36 E Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through). Hub LAN terminal LAN cable (commercially available, straight) Network (LAN) TIPS • You must assign an IP ...

Page 37 - IP CONTROL SETUP; Configure advanced security settings.; Command-based control

37 E n IP CONTROL SETUP 1. Set IP control to ENABLE. Select IP CONTROL SETUP with or and press ENTER . Select CHANGE and press ENTER . Select ENABLE with or and press ENTER . 2. Configure advanced security settings. Select DETAIL SETTING with or and press ENTER . Select CHANGE with or and press ENTE...

Page 38 - Troubleshooting; The video from the HDMI input terminal does not appear; The video from PC D-Sub input terminal does not appear

38 E Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? (See page 14.)• Is the main power switch off? (See page 17.)• Is the monitor in st...

Page 39 - Specifications; Product Specifications

39 E Specifications n Product Specifications Model PN-H701 LCD component 70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD Max. resolution (pixels) 3840 x 2160 Max. colors Approx. 16.77 million colors Pixel pitch 0.401 mm (H) × 0.401 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ...

Page 42 - PC D-sub input terminal pins

42 E Specifications n HDMI input terminal pins (HDMI TM Connector) No. Function No. Function 1 TMDS data 2+ 11 TMDS clock shield 2 TMDS data 2 shield 12 TMDS clock- 3 TMDS data 2- 13 CEC 4 TMDS data 1+ 14 N.C. 5 TMDS data 1 shield 15 SCL 6 TMDS data 1- 16 SDA 7 TMDS data 0+ 17 DDC/CEC GND 8 TMDS dat...

Page 43 - Software components; Sharp-developed software and free software; Acknowledgement; Display of licenses for software used in; Intellectual Property Rights and Other Matters

43 E n License information for software used in the monitor Software components The software incorporated in this monitor consists of multiple independent software components for which copyrights either of Sharp Corporation or third parties exist. Sharp-developed software and free software Some soft...

Page 59 - Mounting Precautions

59 E • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor.• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necess...