Sharp PN-70TB3 - Manuals

5 E Touch Panel Settings The touch panel settings tool starts automatically. An icon ( ) appears on the taskbar. Caution • When using the touch panel, set the “SIZE” of the monitor to “WIDE”, “NORMAL”, or “Dot by Dot”. The touch panel cannot be used when the “SIZE” is set to “ZOOM1” or “ZOOM2”. How ...

6 E Calibration Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is touched. Adjust Calibration can be performed. Follow the on-screen instructions. Reset The calibration settings will be deleted. Properties Settings for the tou...

7 E Touch Panel Settings n Right-click Setting (Mouse Mode) Recognize press and hold as right click Set whether touching the screen continuously is used as a mouse right-click. Press and Hold Duration Set the time that is recognized as a mouse right-click. Press and Hold Effective Range Set the effe...

8 E Uninstall Caution • This can only be done by a user with administrator authority. 1. Click the touch panel settings tool icon ( ) on the taskbar and click “Exit”. • If a confirmation window appears, click “Yes”. 2. Disconnect the USB cable. 3. Select “Control Panel” from the “Start” menu. 4. Cli...

5 E Touch Panel Settings The touch panel driver 2 starts automatically and the icon ( ) appears on the menu bar. TIPS • If PN-L703A/PN-70TA3 (or PN-L703B/PN-70TB3) and PN-L603A/PN-60TA3 (or PN-L603B/PN-60TB3) are connected at the same time, selecting a setting item will display the screen where you ...

6 E n Settings when two devices are connected at the same time • If two displays of the same model are connected, touch operation will only be enabled on one model.• If PN-L703A/PN-70TA3 (or PN-L703B/PN-70TB3) and PN-L603A/PN-60TA3 (or PN-L603B/PN-60TB3) are connected at the same time, select the mo...

7 E Calibration If black bands appear at the top and bottom or left and right of the screen, perform position adjustment so that the mouse cursor correctly moves to the point that is touched. * If black bands appear both at the top and bottom and at the left and right, the touch position is not corr...

8 E Properties Settings for the touch action can be configured in the properties. n Double Click Range Set the range over which the position can shift between the first touch and the second touch and still be recognized as a double- click (“Narrow” (8 pixels) to “Wide” (64 pixels)). To return the se...

9 E n Secondary click You can set press and hold to be recognized as a secondary click.* Enable press and hold for secondary click When the checkbox is selected, press and hold is recognized as a secondary click. Press and Hold Duration Set the time until press and hold is recognized as a secondary ...

10 E Uninstall Caution • To uninstall, an administrator name (user name) and password are required. 1. Disconnect the USB cable. 2. Execute uninstall. (1) Double-click the “TouchPanel” folder, and then double-click the “Mac” folder. (2) Double-click “SharpTouchPanel2 Uninstaller.app”. (3) Click “Uni...

11 E Touch Action TIPS • To change the touch mode and so on, see the manual for the LCD MONITOR (PN-L703A/PN-70TA3/PN-L703B/PN- 70TB3/PN-L603A/PN-60TA3/PN-L603B/PN-60TB3). • Select the action to be used in Function Setting. (See page 9.) • You can not only move the cursor without tap operation. Touc...