Sharp PGLW2000 - Manuals - manualsarea.com

Page 2 - ii; IMPORTANT; • For your assistance in reporting the loss

ii IMPORTANT • For your assistance in reporting the loss or theft of your Projector, please record the Model and Serial Number located on the bottom of the projector and retain this information. • Before recycling the packag ing, please ensure that you have checked the con-tents of the carton thorou...

Page 3 - Introduction; ENGLISH; CONSUMER PRODUCT SAFETY ACT; See bottom of projector.

1 Intr oduction Before using the projector, please read this operation manual carefully. Introduction ENGLISH There are two important reasons for prompt warranty registration of your new SHARP Projec tor, using the REGISTRATION CARD packed with the projector. 1. WARRANTY This is to assure that you i...

Page 4 - Caution Concerning Lamp Replacement; Caution

2 INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Thi...

Page 5 - Accessories; Supplied accessories; Optional accessories

3 Intr oduction Accessories Supplied accessories Power cord* For U.S. and Canada, etc. (6 ' (1.8 m)) <QACCDA083WJPZ> For Europe, except U.K. (6 ' (1.8 m)) <QACCVA025WJPZ> For U.K. and Singapore (6 ' (1.8 m)) <QACCBA105WJPZ> For Australia, New Zealand and Oceania (6 ' (1.8 m)) <Q...

Page 6 - Contents; Preparing; Connecting the Projector to; Adjusting the Projected Image; Using

4 Contents Preparing Introduction Accessories ............................................3 Contents .................................................4 IMPORTANT SAFEGUARDS ..................6Part Names and Functions ...................10 Top View ................................................ 10F...

Page 7 - Reference; Appendix

5 Intr oduction Keylock Function .................................... 48Selecting the Quick Start Menu .............. 49Setting the FUNCTION Button Operation.. 49STANDBY Mode ..................................... 49DLP ® Link TM ............................................ 49 DLP ® Link TM Invert .....

Page 8 - IMPORTANT SAFEGUARDS

6 IMPORTANT SAFEGUARDS CAUTION: Please read all of these instructions before you operate this product and save these instructions for later use. Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN...

Page 9 - Object and Liquid Entr y; and DLP; are trademarks of Texas Instruments.

7 Intr oduction 15. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of ﬁ re or electric shock. 16. Object and Liquid Entr y Never push objects of any kind into this product through openings as they may touch dangerous voltag...

Page 11 - Caution regarding usage of the projector; Info

9 Intr oduction Caution regarding usage of the projector If you are not to use the projector for a long time or before moving the projector, make certain you unplug the power cord from the wall outlet, and disconnect any other cables connected to it.Do not carr y the projector by holding the lens.Do...

Page 12 - Part Names and Functions; Numbers in; Front View

10 Part Names and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. 13 11 12 12 5 6 3 4 7 9 8 10 14 15 16 17 Front View 1 Temperature warning indicator 54 2 Lamp indicator 54 3 Power indicator 54 4 STANDBY/ON button 23 For turning the power on and ...

Page 15 - Inserting the Batteries; Pull down the tab on the cover and remove the; Insert the lower tab of the cover into the opening,; Usable Range; When using the remote control

13 Intr oduction Inserting the Batteries 1 Pull down the tab on the cover and remove the cover towards the direction of the arrow. 2 Insert the batteries. Inser t the batteries making sure the polarities correctly match the m and n marks inside the batter y compartment. 3 Insert the lower tab of the...

Page 16 - Easy Start; Setup and Projection; Place the projector facing a wall or a screen; Turn the projector on

14 Easy Start This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the computer is explained using one example. STANDBY button 8 KEYSTONE button ...

Page 17 - Adjust the projected image with the Setup Guide; Select the Input mode; Turn the power off

15 Easy Start 1 After the projector turns on, the Setup Guide appears. ( When “Setup Guide” is set to “On”. See page 45 .) 2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size. 3 After adjusting the focus, height (angle) and picture size, press ENTER to ﬁ nish ...

Page 18 - Setting Up the Projector; Video Setup; Indication of the Projection Image Size and Projection Distance

16 Setting Up the Projector Video Setup If using this projector outside the U.S.A., please change setting to “0 IRE” in Video Setup. (See page 42 .) Setting Up the Projector For optimal image quality, position the projector perpendicular to the screen with the projector's feet ﬂ at and level. Doing ...

Page 19 - Setup; Screen Size and Projection Distance

17 Setup Screen Size and Projection Distance Screen Lens center H L 16:10 Signal Input (Normal Mode) Picture (Screen) size Projection distance [L] Distance from the lens center to the bottom of the image [H] Diag. [ χ ] Width Height Minimum [L1] Maximum [L2] 300" (762 cm) 646 cm (254") 404 c...

Page 21 - Connections; Connecting the Projector to Other Equipment; Terminals on the Projector

19 Connections Connecting the Projector to Other Equipment Before connecting, ensure that the power cord of the projector is unplugged from the AC outlet and turn off the equipment to be connected. After making all connections, turn on the projector and then the other pieces of equipment. When conne...

Page 22 - Connecting the Projector to Other Equipment (Continued)

20 Connecting the Projector to Other Equipment (Continued) Equipment Terminal on connected equipment Cable Terminal on the projector Video equipment HDMI output terminal HDMI cable (commercially available) HDMI Component video output terminal 3 RCA to mini D-sub 15 pin cable (optional, AN-C3CP2) COM...

Page 23 - Connecting the Power Cord

21 Connections Equipment Terminal on connected equipment Cable Terminal on the projector Audio equipment ø3.5 mm audio output terminal ø3.5 mm stereo minijack to RCA audio cable (commercially available) AUDIO RCA audio output terminal RCA audio cable (commercially available) Audio output terminal Ca...

Page 24 - Controlling the Projector by a Computer; RS-232C Cable recommended connection: D-sub 9 pin female connector

22 Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to a computer with an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. See page 59 for details...

Page 25 - Turning the Projector On/Off; Turning the Projector On

23 Basic Operation Turning the Projector On/Off Turning the Projector On Note that the connections to external equipment and power outlet should be done before performing the operations written below. (See pages 19 to 21 .) Press STANDBY/ON on the projector or ON on the remote control. The power ind...

Page 26 - Image Projection; About the Setup Guide; Press; FOCUS

24 Image Projection About the Setup Guide After turning on the projector, the Setup Guide screen appears to assist you with projector setup. Guidance items 1 FOCUS 2 HEIGHT ADJUST 3 ZOOM Press ENTER to exit the Setup Guide screen. The Setup Guide screen automatically highlights the items in the foll...

Page 27 - Adjusting the Height; Lift the projector to adjust its; Adjusting the Picture Size

25 Basic Operation 2 Adjusting the Height The height of the projector can be adjusted using the adjustment feet at the front and rear of the projector. When the screen is above the projector, the projection image can be made higher by adjusting the projector. 1 Lift the projector to adjust its heigh...

Page 28 - KEYSTONE

26 Correcting Trapezoidal Distortion When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. The Keystone Correction can be adjusted...

Page 29 - Switching the Input Mode; Adjusting the Volume

27 Basic Operation Displaying the Black Screen and Turning Off the Sound Temporarily Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound. Pressing AV MUTE again will turn the projected image back on. • N o t e On-screen display On-screen display Switching...

Page 30 - Resize Mode; COMPUTER

28 Resize Mode This function allows you to modify or customize the Resize mode to enhance the input image. Depending on the input signal, you can choose a desired image. Press RESIZE . See page 43 for setting on menu screen. COMPUTER NORMAL FULL NATIVE 16:9 4:3 aspect ratio SVGA (800 × 600) 1068 × 8...

Page 31 - About Copyrights

29 Basic Operation VIDEO/DTV Input signal Output screen image Video/DT V Image t ype NORMAL ARE A ZOOM V-STRETCH 16:9 4 8 0 I , 4 8 0P, 576 I , 576P, NTSC, PAL , SECAM 4:3 aspect ratio *1 Squeeze *1 Letter box *1 720P, 1035 I , 10 8 0 I , 1080P 16:9 aspect ratio *1 —*2 16:9 aspect ratio *1 540P 16:9...

Page 32 - Operating with the Remote Control; Displaying the Pointer; Using the Spot Function

30 Operating with the Remote Control POINTER button ECO+QUIET button Adjustment buttons ( P / R / O / Q ) BREAK TIMER button SPOT button AUTO SYNC button FREEZE button PICTURE MODE button MAGNIF Y buttons EFFECT button Displaying and Setting the Break Timer 1 Press BREAK TIMER . The timer star ts to...

Page 33 - Freezing a Moving Image

31 Useful Featur es Auto Sync(Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 41...

Page 34 - Menu Items; The following shows the items that can be set in the projector.; “Quick Start Menu”

32 Menu Items The following shows the items that can be set in the projector. “Picture” menu Main menu Sub menu Picture Page 38 Page 38 Page 39 Page 39 Page 39 Page 39 Page 39 Page 40 Page 40 +30 -30 Contrast +30 -30 +30 -30 +30 -30 1 -1 2 0 +30 -30 +30 -30 +30 -30 Tint Color Sharp Bright Film Mode ...

Page 37 - MENU; Using the Menu Screen

35 Useful Featur es Adjustment buttons ( P / R / O / Q ) ENTER button RETURN button Press RETURN to return to the previous screen when the menu is displayed. • MENU button Adjustment buttons ( P / R / O / Q ) MENU button ENTER button Menu Selections (Quick Start Menu) This operation can also be per ...

Page 38 - Quick Start Menu

36 Using the Menu Screen (Continued) Quick Start Menu The following items can be conﬁ gured on the Quick Start Menu. Selectable items Description Input Search Star t Automatically searches for and switches to the appropriate Input mode.Pressing an operation button during input searching cancels the ...

Page 40 - Selecting the Picture Mode

38 Picture Adjustment (“Picture” Menu) Menu operation n Page 36 Q PAGE1 Q PAGE2 Picture Mode Contrast 0 0 0 0 Bright Color Tint 0 Sharp Standard SEL./ADJ. ENTER END 0 0 Red Blue Picture SIG SCR PRJ1 PRJ2 1 2 Picture Mode CLR Temp B r i l l i a n t C o l o r T M C.M.S. Setting C.M.S. Standard Film Mo...

Page 41 - Adjusting the Image; Adjusting the Color; Adjusting the Colors

39 Useful Featur es Menu operation n Page 36 2 Adjusting the Image Adjustment items O button Q button Contrast For less contrast. For more contrast. Bright For less brightness. For more brightness. Color* 1 For less color intensity. For more color intensity. Tint* 1 For making skin tones purplish. F...

Page 42 - Selecting the Film Mode

40 5 Selecting the Film Mode This function provides high-quality playback of images originally projected at 24 fps, such as movies on DVDs. Selectable items Description Auto Films are detected automatically. Of f Films are not detected. This function is available for the following signals.With COMPU...

Page 43 - Adjusting the Computer Image; Resolution Setting; Signal Type Setting

41 Useful Featur es Signal Adjustment (“SIG-ADJ” Menu) Menu operation n Page 36 0 0 0 0 Phase Clock H-Pos V-Pos Reset Auto 1024 x 768 0 IRE ResolutionSignal Type Video Setup Auto Video System Standard Dynamic Range Signal Info 1024 x 768 H 48.3 kHz / V 60.0 Hz SEL./ADJ. ENTER END Pict. SIG-ADJ SCR P...

Page 44 - Setting the Video System; Setting the Video Setup; Checking the Input Signal

42 5 Setting the Video System The video input system mode is factor y preset to “Auto”; however, a clear picture from the connected audio-visual equipment may not be received, depending on the Video signal difference.In that case, switch the Video signal. Selectable items Auto PAL SECAM *NTSC4.43 NT...

Page 45 - Setting the Resize Mode; Keystone Correction

43 Useful Featur es Adjusting the Projected Image (“SCR-ADJ” Menu) Menu operation n Page 36 SEL./ADJ. ENTER END Resize Image Shift 0 0 Keystone OSD Display Closed Caption Overscan BackgroundSetup Guide PRJ Mode On Front Wall Color Language Off English On Off Logo On Normal Pict. PRJ1 PRJ2 SIG SCR-AD...

Page 46 - Setting the Overscan; Setting the On-screen

44 4 Setting the Overscan This function allows you to set the overscan area (display area). Selectable items Description On The input area is displayed without the screen edges. Of f The whole input area is displayed. This function is available for the following signals.With COMPUTER/COMPONENT or HD...

Page 48 - Auto Sync (Auto Sync; Auto Power Off Function; Auto Restart Function

46 Adjusting the Projector Function (“PRJ-ADJ1/2” Menu) Menu operation n Page 36 Q PRJ-ADJ1 SEL./ADJ. ENTER END Auto Power Off On Auto Restart On Speaker On Off Keylock System Lock Fan Mode Normal Disable Auto Sync On Pict. SCR PRJ-ADJ1 SIG PRJ2 1 2 3 4 5 7 6 1 Auto Sync (Auto Sync Adjustment) Selec...

Page 49 - System Lock Function; Setting/Changing the Keycode; Select “System Lock”, then press; Press the 4 buttons on the remote

47 Useful Featur es 6 System Lock Function This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access. ...

Page 50 - Keylock Function; Setting with the menu screen; Setting with the projector buttons

48 7 Keylock Function Use this function to lock the operation buttons on the projector.This function can be set using either the menu screen or ENTER on the projector. a Setting with the menu screen Selectable items Description On All buttons on the projector, except STANDBY/ON , are locked. Of f ...

Page 52 - Viewing Stereoscopic 3D Images; Precautions on Viewing Stereoscopic 3D Images; WARNING

50 Viewing Stereoscopic 3D Images Precautions on Viewing Stereoscopic 3D Images Before viewing stereoscopic 3D images, please read this section carefully. WARNING Under normal conditions, viewing stereoscopic 3D images is safe for any duration that you would normally view your screen. However, some ...

Page 53 - Information on the 3D Projection Function

51 Useful Featur es Information on the 3D Projection Function To display 3D images, this projector requires: WHAT YOU WILL NEED1) Source devices that suppor t the ﬁeld sequential format – For details on the suppor ted signals, see the Compatibility Char t in this operation manual. 2) 3D LCD shutter ...

Page 54 - Using 3D Viewing Mode; Projecting 3D images; D MODE; Viewing Stereoscopic 3D Images (Continued)

52 Using 3D Viewing Mode Use the following procedure to project 3D images. For operation of the 3D LCD shutter glasses and the 3D-video playback equipment, see the corresponding operation manual. O / Q buttons ENTER button 3D MODE button Projecting 3D images 1 Turn the projector on. 2 Turn the 3D-...

Page 55 - Maintenance

53 Appendix Maintenance Cleaning the projector Ensure that you have unplugged the power cord before cleaning the projector.The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the ﬁ nish on the cabinet.Do not use volatile agents such as i...

Page 56 - Maintenance Indicators; Top View

54 Maintenance Indicators The warning lights (power indicator, lamp indicator and temperature warning indicator) on the projector indicate problems inside the projector.If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will ent...

Page 58 - Regarding the Lamp; Lamp

56 Regarding the Lamp Lamp It is recommended that the lamp (sold separately) be replaced when the remaining lamp life becomes 5% or less, or when you notice a signiﬁ cant deterioration in the picture and color quality. The lamp life (percentage) can be checked with the on-screen display. (See page 4...

Page 60 - Resetting the Lamp Timer; Connect the power cord.

58 4 Remove the lamp unit. Loosen the securing screw from the lamp unit. Hold the lamp unit and pull it in the direction of the arrow. At this time, keep the lamp unit horizontal and do not tilt it. 5 Insert the new lamp unit. Press the lamp unit ﬁ rmly into the lamp unit compartment to align the la...

Page 61 - RS-232C Specifi cations and Commands; Computer control; Return code

59 Appendix RS-232C Speciﬁ cations and Commands Computer control A computer can be used to control the projector by connecting an RS-232C serial control cable (cross t ype, commercially available) to the projector. (See page 22 .) Communication conditions Set the serial por t settings of the compute...

Page 62 - Commands; Computer

60 RS-232C Speciﬁ cations and Commands (Continued) Commands Example: When turning on the projector, make the following setting. Computer Projector P O W R _ _ _ 1 →← O K CONTROL CONTENTS COMM A ND PA R A ME TER RE TURN Power ON Standby mode (or 30-second star tup time) Power On P O W R _ _ _ 1 OK or...

Page 66 - Compatibility Chart

64 Compatibility Chart Computer • Multiple signal suppor t Horizontal Frequency: 15-110 kHz, Ver tical Frequency: 45-85 Hz, Pixel Clock: 12-165 MHz Sync signal: Compatible with T TL level • Compatible with sync on green signal PC/MAC Mode Resolution Horizontal frequency [kHz] Ver tical frequency [Hz...

Page 67 - D Supported Signals; DTV

65 Appendix 3D Supported Signals Signal Horizontal Frequency (kHz) Ver tical Frequency (Hz) Analog Suppor t Digital Suppor t SVGA 800 × 600 77.1 120 ✔ ✔ XGA 1024 × 768 98.6 120 ✔ ✔ W XGA 1280 × 720 92.6 120 ✔ ✔ 1280 × 800 101.6 120 *1 ✔ ✔ *1 Reduced Blanking Your computer graphics card must be able ...

Page 68 - Troubleshooting

66 Troubleshooting Problem Check Page No picture and no sound or projector does not star t. Projector power cord is not plugged into the wall outlet. • 21 Power to the external connected devices is of f. • – The selected Input mode is wrong. • 27 The AV Mute function is working. • 27 Cables are inco...

Page 71 - For SHARP Assistance

69 Appendix U.S.A. Sharp Electronics Corporation 1-888-GO-SHARP (1-888-467-4277) [email protected] http://www.sharpusa.com Canada Sharp Electronics of Canada Ltd. (905) 568-7140 http://www.sharp.ca Mexico Sharp Electronics Corporation Mexico Branch (525) 716-9000 http://www.sharp.com.mx Latin ...

Page 72 - Specifi cations; This SHARP projector uses a DLP

70 Speciﬁ cations Model PG-LW2000 Display devices 0.65" DLP ® Chip ×1 Resolution W XGA (1280 × 800) Lens F number F 2.5 – 2.7 Zoom Manual, x 1.2 Focus Manual f = 21.8 – 25.6 mm Input terminals HDMI ×1 Computer/Component(mini D-sub 15 pin) ×1 Video (RCA) ×1 Audio (RCA) ×1 (L /R) Control and commu...

Page 73 - Dimensions

71 Appendix Dimensions Units: inches (mm) M4 M4 M4 9 21 / 32 ( 245 ) 12 3 / 32 (307) 1 7 / 8 ( 47.6 ) 3 45 / 64 ( 94 ) 3 25 / 64 ( 86 ) 5 / 8 ( 15.5 ) 3 5 / 32 (80) 1 1 / 4 (31.5) 13 / 64 (5) 1 23 / 32 (43.5) 5 3 / 32 (129) 4 31 / 32 (126) 1 61 / 64 ( 49.5 ) 2 5 / 32 ( 54.5 ) 4 3 / 64 ( 102.5 ) 4 1 ...

Page 74 - Index

72 16:9·············································································28, 293D MODE button ······························································52 Accessories ········································································3AC socket ···································...