Sharp PG-M25X - Manuals

Intr oduction -3 Outstanding Features 1. Image Quality • Superior image quality with Fujinon™ optical lens system. • Newly developed DDR (Double Data Rate) chip eliminates Color Break-ing phenomena common with previous generation DLP™ projectors. • Newly developed 12° DMD™ chip provides significantl...

-4 6. Built-in PCMCIA card slot (Type II ) • Wireless presentations using a wireless LAN PC card. Supports the global wireless LAN standard, IEEE802.11b. This wireless LAN PC card complies with IEEE802.11b wireless LAN standards.Computers with built-in wireless LAN PC cards that suppor t this standa...

Intr oduction -5 Contents Introduction Outstanding Features ......................................... 3 Contents ............................................................... 5 IMPORTANT SAFEGUARDS ............................... 8 How to Access the PDF Operation Manuals (Windows, Macintosh) ........

-6 Network Settings ............................................... 69 Setting Up a Projector Name ................................... 69 Setting the IP Address ............................................. 70 Setting the Wireless Channel ................................... 71 Setting the SSID ........

-8 1. Read Instructions All the safety and operating instructions should be readbefore the product is operated. 2. Retain Instructions The safety and operating instructions should beretained for future reference. 3. Heed Warnings All warnings on the product and in the operatinginstructions should be...

Introduction -11 Be sure to read the following safeguards when setting upyour projector. Caution concerning the lamp unit ■ Po t e n t i a l h a z a r d o f g l a s sparticles if lamp ruptures. Incase of lamp rupture, contactyour nearest Sharp Autho-rized Projector Dealer or Ser-vice Center for a re...

-14 Projector (Front and Top View) Part Names Numbers in refer to the main pages in this Operation Manual where the topic is explained. 110 110 110 34 38 50 50 35 37 35 50 35 51 63 22 35 14 18 37 40 Foot releases/Adjustmentfeet For adjusting the projector’sheight. Attaching the terminal cover Attach...

-16 GyroRemote Part Names (cont.) Gyration U.S. Patents5698784, 5825350, 5898421 WIRE R/C JACK 42 44 54 35 41 42 40 35 48 49 38 42 40 48 44 Bottom 48 Front Rear Function 1 / 2 buttons For specifying the button assignmentsfor Function 1 and Function 2 INPUT button For switching between inputs 1,2,3an...

Introduction -17 Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below. Tapes forremoving thebatteries Inserting the Batteries The batteries (four R03 batteries (“AAA” size, UM/SUM-4, HP-16 or similar)) are included in the package. 1 Slide the cover in...

-18 GyroRemote Features This projector uses the GyroRemote technology, that allows for the following features when compared toordinary infrared remote controls. RF Technology With ordinar y remote controls, the operation range is limitedbecause of directivity; they cannot operate if there are object...

Introduction -19 Calibrating theGyroRemote If there are any extreme temperature changeswhen the GyroRemote is being used or afterbatteries have been replaced, the mousecursor or pointer may continue to move byitself even if no action has been performed. Inthis case, calibrate the GyroRemote using th...

-20 N o t e Accessories GyroRemote (1) For U.S., Canada, etc. RRMCG1631CESA (2) For Europe, Australia, Oceania and Asia RRMCG1653CESA Four R03 batteries(“AAA” size, UM/SUM-4,HP-16 or similar) Power cord (6' (1.8m)) For U.S., Canada, etc.QACCDA007WJPZ For Europe, except U.K.QACCV4002CEZZ For U.K., Ho...

Up Down Foot releases Adjustment feet Setup Using the AdjustmentFeet The height of the projector can be adjustedusing the adjustment feet when the surfaceof the projector is placed on is uneven or whenthe screen is slanted.The projection of the image can be madehigher by adjusting the projector when...

Setup and Connections -23 90 ° 90 ° Example of Standard Setup Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. N o t e • The projector lens should be centered in the middle of the screen. If the horizontal line passing...

-24 Setup (cont.) Screen Size and Projection Distance 90 ° H Screen Base line:Horizontal line passing throughthe lens center. Lens center L:Projection distance The formula for picture size and projection distance L1 (ft) = (0.048539X – 0.037278) / 0.3048 L2 (ft) = (0.040172X – 0.037561) / 0.3048 H (...

Setup and Connections -25 When using the default setting. ▼ On-screen Display Projecting a Reversed/Inverted Image Projection from behind the screen ■ Place a translucent screen between the projector and theaudience. ■ Reverse the image by setting “Rear” in “PRJ Mode”. Seepage 98 for use of this fun...

Connecting the Projector to Other Devices Before Connecting N o t e • Before connecting, be sure to turn off both the projector and the devices to be connected. After making allconnections, turn on the projector and then the other devices.When connecting a computer, be sure that the computer is the ...

Setup and Connections -27 1 DVI to 15-pin D-sub cable Connecting the Projector to a Computer Connecting to a ComputerUsing the DVI to 15-pinD-sub Cable 1 Connect the projector to thecomputer using the suppliedDVI to 15-pin D-sub cable. • Secure the connectors by tighteningthe thumbscrews. 2 To input...

-28 1 DVI cable (sold separately) Connecting the Projector to Other Devices (cont.) Connecting to aComputer Using a DVICable (Sold Separately) This projector comes installed with a DVI digi-tal input terminal in which computer digital im-age signals can be directly input. 1 Connect the projector to ...

Setup and Connections -29 1 DVI to 15-pin D-sub adaptor (sold separately) Connecting to Video Equipment Connecting toComponent VideoEquipment Use a 3 RCA to 15-pin D-sub cable and DVI to15-pin D-sub adaptor when connecting to theINPUT 1 terminal, component video equipmentsuch as DVD players and DTV*...

Setup and Connections -31 Installing / Removing the PC Card Remove the cardfrom the slot andstore it in a safeplace. If the Ejectbutton is out, pressit once more to setit back in place. Eject button The notch Make sure that the Ejectbutton is not out, and thatthe notch on the card is tothe left, whe...

To RGB output por t Connecting to a Monitor Watching Images onBoth the Projector anda Monitor You can display computer images on both theprojector and a separate monitor using an RGBmonitor loop-out adaptor and an RGB cable. 1 Connect the projector to thecomputer and monitor usingan RGB monitor loop...

Basic Operation Basic Operation PG-M25X#E#p33_49.p65 02.4.29, 3:11 PM 33

Image Projection Basic Procedure Connect the required external equipment to theprojector before operating the following procedures.Details are found in the projector operationmanual. Info • The language preset at the factory is English.If you want to change the on-screen displayto another language, ...

Basic Operation -35 " On-screen Display (Example) UsingAnalog RGB UsingComponent INPUT 2 Mode INPUT 3 Mode 4 Press and select the input mode. • Each press switches in the followingorder’ → INPUT 1 → INPUT 2 → INPUT 3 → INPUT 4 • Yo u c a n a l s o u s e t h e o n t h e GyroRemote. N o t e • When...

Basic Operation -37 Zoo m in Zoo m o ut Selecting the On-screenDisplay Language • The on-screen display language of the pro-jector can be set to English, German, Span-ish, Dutch, French, Italian, Swedish, Por-tuguese, Chinese, Korean or Japanese. • The following explanation uses operationsfrom the p...

Correcting the Trapezoidal Distortion (Keystone Correction) Correcting the Trap-ezoidal Distortion This function allows for Keystone (On-screenTrapezoidal Distortion) Correction.The following explanation uses operationsfrom the projector as example. N o t e • Keystone Correction is the correction fo...

Basic Operation -39 3 Press . N o t e • You can use the same settings usedin NORMAL mode 4:3 for 16:9. • Straight lines or the edges of imagesmay appear jagged while adjustingthe image. • T h e D i g i t a l S h i f t f u n c t i o n i sdisplayed when a wide screen fromvideo or digital video is disp...

-40 Using the GyroRemote Before Using theGyroRemote Make sure that the antenna on the projectoris fully extended before operating the projectorwith the GyroRemote. Info • The control range under actual operatingconditions may be less than optimumd e p e n d i n g o n w h e r e t h e p r o j e c t o ...

Basic Operation -41 Function Assign T h e B u t t o n A s s i g n f u n c t i o n o n t h eGyroRemote, consists of 5 items (1/5 to 5/5)and within each, there are 4 function buttons(Function 1 to 4.)Selecting the function buttons for assigningitems is done via the projector. 1 Press on the GyroRemote...

Using the Presentation Tools The GyroRemote is equipped with the following presentation tools. These are very usefulwhen emphasizing a main point during the presentation. • Pointer function • Stamp function • Line function Using the Pointer Using the GyroRemote. For details seepage 40. 1 H o l d t h...

Using the Line Function Using the GyroRemote, you can draw on thescreen various shapes such as squares, ovals,horizontal, vertical, perpendicular and free-style lines. Using the GyroRemote,For details see page 40. 1 Press on the GyroRemote and then select “Button Assign 1/5”. • The assign function i...

Basic Operation -47 Suppliedaccessory USB cable USB por t Notebook computer USB cable Using the Wireless Presentation Function of the GyroRemote The remote control can perform mouse operations on a computer screen displayed on theactual screen. The remote control can also be used as a pointer. (See ...

Using as a WirelessMouse 1 Move the GyroRemote whileholding down . The LED indicator is lit. 2 Press or . It functions the same as the buttons of amouse connected to the com-puter. • In the case of one mouse button (suchas on a Macintosh) clicking this buttonwill function the same as either and . Co...

This projector has three sets of menu screens that allow you to adjust the image and variousprojector settings.You can operate the menus from the projector or GyroRemote using the following proce-dure. Using the Menu Screen On-screen menu for INPUT 1 RGB mode On-screen menu for INPUT 2or INPUT 3 Mod...

1 2 3 On-screen menu for INPUT 1 mode MENU button GYRO ACTIVEbutton GYRO ACTIVEbutton (Rear) Menu Bar(Main Menu) -54 Using the Menu Screen (cont.) Using the GyroRemote toNavigate the On-screenMenu (Adjustments) 1 Press . • The menu screen is displayed. N o t e • T h e “ P i c t u r e ” m e n u s c r...

-56 +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 +3 -3 +150 –150 +150 –150 +30 –30 +60 –60 12 •• 7 12 •• 7 123 •• 7 640 × 480 720 × 480 480P Resolution 1024 × 768 800 × 600 Vert Freq 60 Hz75 Hz Resolution 1024 × 768 800 × 600 Vert Freq 60 Hz75 Hz 640 × 480 31.5 KHz60 Hz EnglishDeutschEspa...

Basic Operation Adjusting the Picture You can adjust the projector’s picture to your preferences with the following picture settings. Selected Item Description button button Contrast Bright Color Tint Sharp Red Blue CLR Temp For adjusting the contrast level For adjusting the brightness of an image F...

Progressive Mode This function allows you to select the pro-gressive display of a video signal. The pro-gressive display projects a smoother videoimage. Select “Progressive Mode” in the “Pic-ture” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu...

Basic Operation Adjusting Computer Images Use the Fine Sync function in case of irregularities such as vertical stripes or flickering inportions of the screen. When Auto Sync is OFF When “Auto Sync” is “OFF”, interferencesuch as flickering or vertical stripes may oc-cur if displaying tilings or vert...

-62 Selecting Adjustment Settings Adjustment settings stored in the projectorcan be easily accessed. Select “Select Setting” in the “FineSync” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. N o ...

Basic Operation Checking the Input Signal This function allows you to check the currentinput signal information. Select “Signal Info” in the “Fine Sync”menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and...

-66 Before setting the network This section explains items that can be set in a network. A wireless connection will not be possible if theseitems are not set correctly.Also, as there are values that must be entered in a pre-configured network, make sure to consult with yournetwork administrator. IP ...

68 Using a Wireless LAN PC Card Inserting a wireless LAN PC card into the INPUT 4 slot on the projector allows you to sendimages to the projector and project them via a wireless connection. -68 Installing a WirelessLAN PC Card 1 Inser t the wireless LAN PCcard into the INPUT 4 slot onthe projector. ...

Easy to Use Functions -69 Network Settings N o t e • This section explains items that can be set in a network. A wireless connection will not be possible if theseitems are not set correctly. • Also, as there are values that must be entered in a pre-configured network, make sure to consult with yourn...

70 Network Settings (cont.) -70 5 Repeat steps 3 and 4 to enter the remaining characters you want. N o t e • A maximum of 16 characters can beentered 6 Press . • The settings are stored and active. Setting the IP Address Set the IP Address of the projector. Set “TCP/IP” in the network menu on themen...

Easy to Use Functions -71 5 Repeat steps 3 and 4 to set allthe digits. Setting the Gateway Select “Gateway” using the procedure instep 1, and enter the values by repeatingthe procedure in step 3 and 4. Setting the Subnet Mask Select “Subnet Mask” using the procedurein step 1, and enter the values by...

72 Network Settings (cont.) -72 Setting the SSID Set the projector’s SSID.The default setting is “SHARP_PRJ”. Select “Wireless LAN” in the networkmenu on the menu screen ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. 1 ...

Easy to Use Functions -73 Setting the DHCPServer This function is set when using the DHCPserver on the projector. Set “DHCP Server” in the network menuon the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. E...

-74 Resetting the NetworkSettings This will return the default values of theNetwork Settings. Select “Reset” in the Network menu onthe menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. Network Settings (cont.)...

Easy to Use Functions Using a Memory Card When a memory card is installed, images stored in the memory card can be projected.If presentation files are stored in the memory card you can make presentations using onlythe projector and the memory card, without having to use a computer. -75 Displaying of...

Easy to Use Functions -77 Setting Lists You can display files in lists.For list settings, see page 78. Moving files • Press or to select the folder and press . • To move the folder up one level, select and press . Projecting a file • Press or or to select the folder and press . • The selected image ...

-78 Memory Card Settings Setting Files You can limit the files displayed in the Indexmode according to their type. Select “Display File” in the MemoryCard menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 ...

Easy to Use Functions Setting the DisplayFormat of the Index Mode Select “View” in the Memory Card menuon the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. N o t e • Thumbnail displayFor displaying the con...

Easy to Use Functions -81 Displaying a Still Image This function allows you to instantly freeze a moving image. This is useful when you want todisplay a still image from a computer or video, giving you more time to explain the image tothe audience. Function 2button " On-screen Display ASSIGN but...

-82 Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance theinput image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BYDOT”, “BORDER”, “STRETCH” or “SMART STRETCH” image. ASSIGNbutton Screen display of the pic...

-86 Selected Mode STANDARD PRESENTATION CINEMA GAME Description For Standard picture Brightens darker portions of image for more enhanced presentations. Gives greater depth to darker por tions of image for a more exciting theater experience. Natural color gradation for playing a game, etc. Gamma Cor...

Easy to Use Functions -87 Selecting the Power Save Mode The Power Save Mode or the Automatic Power Shutoff function allows you to reduce thepower consumption of the projector. Setting the Power SaveMode Select “Power Save” in the “Options (1)”menu on the menu screen. ➝ For operating the menu screen,...

-88 Displaying Dual Pictures (Pict in Pict) Picture in Picture function allows you to display two pictures on the same screen. You candisplay the image input from INPUT 2 or 3 as an inset picture overlapping the main picturefrom INPUT 1. (This function can only be set in the RGB menu.) Displaying th...

Easy to Use Functions -89 Selected Item Normal Level A Level B Description All On-screen Displays are displayed. Input/Freeze/Enlarge/Auto Sync/Volume/AV Mute are not displayed. All On-screen Displays are not displayed.(except Menu, On-screen displays displayed when the LENS button is pressed, andwa...

-90 Activating the sRGB Color Management Function Setting the Color Manage-ment Function (sRGB) Select “sRGB” in the “Options (1)” menuon the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. N o t e • For add...

Easy to Use Functions -91 Using Auto Search Select “Auto Search” in the “Options(1)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. N o t e • ON Automatically switches to the input modein which ...

-92 Video Digital Noise Reduction (DNR) System Reducing Image Noise Select “DNR” in the “Options (1)”menu. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. N o t e • Set a level so as to view a clearer picture. Make sure ...

Easy to Use Functions -93 Setting the Video Signal Setting the VideoSignal Select “Video System” in the “Options(1)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. N o t e • The video signal can...

-94 Saving Projected Images • This projector allows you to capture projected images (RGB signals) and set them as astartup image, or background image when no signals are being received. • You can capture the images that are input using analog RGB signals and Digital RGB XGAsignals. Capturing the Ima...

Setting a Background Image This function allows you to select the image displayed when no signal is being sent to theprojector. *1 You can set a captured image as a background image by selecting “Custom”.*2 If the input signal has interference, the screen will be displayed with the interference. Sel...

Lamp Usage Time Using an RGB monitor loop-out adaptor (sold separately) and an RGB cable (commerciallyavailable), be sure to set to “ Yes (Y Cable)” when you want to display computer images both on the projector and on a monitor. Using an RGB MonitorLoop-out Adaptor Select “Monitor Out” in the “Opti...

Easy to Use Functions -97 Displaying the Break Timer " On-screen Display Displaying and Settingthe Break Timer Select “Break Timer” from the “Options(2)” menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages ...

-98 Reversing/Inverting Projected Images This projector is equipped with a reserve/invert image function that allows you to reverse orinvert the projected image for various applications. Selected Item Front Ceiling + Front Rear Ceiling + Rear Description Normal image Inverted image Reversed image Re...

Easy to Use Functions -99 Locking the Operation Buttons on the Projector This function can be used to lock the use of certain operation buttons on the projector.The following are the three keylock levels. Keylock Level Normal Level A Level B Setting up the Keylock Select “Keylock Level” in the “Opti...

-100 -100 Setting up a Password A password can be set by the user to prevent adjustments to certain settings on the “Options(2)” menu. Using a password together with the Keylock Level (page 99) is more effective. Entering the Password Select “Password” in the “Options (2)”menu on the menu screen ➝ F...

Easy to Use Functions -101 Changing the Password Select “Password” in the “Options (2)”menu on the menu screen ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. 1 Press , and to enter the password in “Old Password” and pre...

-102 Setting the Anti-Theft Setting the anti-theft function will disable any projection of images even if signals are sent tothe projector. A keycode is necessary to release the system lock. Make sure to remember thekey code you set. Info If the keycode is not correctly entered in the key code field...

-104 Setting the Anti-Theft (cont.) Changing the Keycode • When “Anti-Theft” is selected and a pass-word has been entered, the password inputbox is displayed. After the password has beenentered, you can change the keycode. Select “Anti-Theft” in the “Options (2)”menu on the menu screen. ➝ For operat...

Easy to Use Functions -105 Initializing the Settings This function allows you to initialize the settings you have made in the projector. Returning to theDefault Settings Select “All Reset” in the “Options (2)”menu on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operat...

-106 This function can be used to display all the adjusted settings as a list on the screen. Displaying the Adjustment Settings Overview of ALL MenuSettings Select the “Status” menu and press on the menu screen. ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen us...

Carrying the Projector How to Use theCarrying Case When transporting the projector, make sureto retract the antenna, cover the lens with thel e n s c a p , a n d p l a c e t h e p ro j e c t o r i n t h eincluded carrying case. 1 Open the cover of the carrying case. 2 R e m ov e t h e i n n e r p a ...

Appendix -109 Cleaning the lens ■ Use a commercially available blower or lenscleaning paper (for glasses and camera lenses)for cleaning the lens. Do not use any liquid typecleaning agents, as they may wear off the coat-ing film on the surface of the lens. ■ As the surface of the lens can easily get ...

-110 Maintenance Indicators Info • If the TEMPERATURE WARNING indicator illuminates, and the power turns off, follow the above possiblesolutions and then wait until the projector has cooled down completely before plugging in the power cord andturning the power back on. (At least 5 minutes.) • If the...

Appendix -111 Lamp ■ It is recommended that the lamp (sold separately) be replaced after approximately 1,900 cumulativehours of use or when you notice a significant deterioration of the picture and color quality. The lampusage time can be checked with the on-screen display. See page 58. ■ For lamp r...

POWER button Regarding the Lamp (cont.) Removing and Install-ing the Lamp Unit Info • Be sure to remove the lamp unit by thehandle. Be sure not to touch the glasssurface of the lamp unit or the inside ofthe projector. • To avoid injury to yourself and damageto the lamp, be sure to carefully followth...

Appendix -113 AC socket POWER button Adjustment buttons( "| "| "| "| "| ) ENTER button User service screw 4 Loosen the lamp unit. • Remove the securing screws from thelamp unit. Hold the lamp unit by thehandle and pull it in the direction ofthe arrow. 5 Insert the new lamp unit. ...

-114 1 2 4 3 17 • • • • • • • • • ~ • • • • • • • • • • • • • ~ • • • • • • • • ~ • • • • 24 18 23 C3 2 1 9 16 C1C2C4 C5 8 7 • DVI Digital INPUT Pin No. Signal Pin No. Signal 1 T.M.D.S data 2– 16 Hot plug detection 2 T.M.D.S data 2+ 17 T.M.D.S data 0– 3 T.M.D.S data 2 shield 18 T.M.D.S data 0+ 4 Not...

Appendix -115 Computer Compatibility Chart * Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated. N o t e • This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should thisoccur, turn off the LCD disp...

-116 Troubleshooting Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to side panel of the projector. • Remote control batteries have run out. • External output has n...

-118 For SHARP Assistance If you encounter any problems during setup or operation of this projector, first refer to the“Troubleshooting” section on pages 76 and 77. If this operation manual does not answeryour question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electron...

Appendix -119 Specifications Digital Multimedia ProjectorPG-M25XNTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/DTV480 I /DTV480P/DTV720P/DTV1080 I Single Chip Digital Micromirror Device™ (DMD™) by Texas InstrumentsPanel size: 0.7" (17.8 mm), 1 chip XGA DMDNo. of dots: 786,432 dots (1,024 [H] ×...

-120 Wireless LAN PC Card Specification Product Name 11 Mbps Wireless LAN PC Card Model Number AN-WC11B Host Interface PCMCIA TYPE II Dimensions 4 1 ⁄ 2 " × 2 1 ⁄ 8 " × 1 ⁄ 4 " (115 × 54 × 7 mm) Weight 40 g Frequency Band 2.412 – 2.462 GHz (Central frequency) Number of Channel Channels t...

Appendix -121 Usable Cards and Their Capacity 1. JPEG images that are DCF compliant * 1 and are stored in a memory card such as those from a digital camera, can be displayed in the projector when using the Card mode. For details on the Card Mode, see page XX. 2. The memory cards in the following tab...

-122 Side View Side View Top View Rear View Front View Bottom View 11 13 / 16 (303) 1 1 / 2 (38.7) 27 1 / 16 (687) 1 3 / 8 (34.2) 3 1 / 4 (82.9) 3 (76) 10 5 / 16 (261.5) 4 1 / 8 (104) 3 1 / 8 (80) 5 / 16 (7.5) 12 1 / 16 (306.5) 8 5 / 8 (219) 5 1 / 16 (128) 4 9 / 16 (115.5) 8 3 / 4 (223) 7 11 / 16 (1...

Appendix -123 Glossary Advanced intelligent compression High quality resizing of lower and higher resolu-tion images to fit the projector’s native resolution. Anti-theft If the “Keycode” set in the projector is not correctlyentered, the projector will not operate even ifsignals are entered. Aspect R...

Appendix -125 Index 2D Progressive .................................................... 603D Progressive .................................................... 60 AC socket ............................................................. 26Adjustment buttons .................................................

SHARP CORPORATION PG-M25X#E#Hyo4.p65 02.4.29, 3:04 PM 1