Sharp MX-M464N - Manuals - manualsarea.com

Page 2 - For the users of the fax function; FAX interface cable and Line cable:; SOFTWARE LICENCE; Warranty; Notice for users in the UK; EMC (this machine and peripheral devices)

2 For the users of the fax function � FAX interface cable and Line cable: These special accessories must be used with the device.The declaration of conformity may be consulted at: http://www.sharp.de/doc/MX-FX11.pdf SOFTWARE LICENCE The SOFTWARE LICENCE will appear when you install the software from...

Page 3 - CAUTIONS; CAUTION; Power notes; WARNING; CAUTION; Symbols in this manual

3 CAUTIONS To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual. WARNING Indicates a risk of death or serious injury. CAUTION Indicates a risk of hum...

Page 4 - About consumables; Installation notes

4 Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine. Risk of injury due to the machine falling or toppling. If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or othe...

Page 5 - Handling precautions; Laser information

5 Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine. If the liquid spills or the object falls into the machine, fire or electrical shock may result. Do not remove the machine casing. High-voltage parts inside the machine may cause electrical ...

Page 6 - SUPPLIES; Proper storage; Storing toner cartridges; Storage of supplies; Noise emission; Noise emission values; Caution; SAFETY DATA SHEET; Staple cartridge

6 SUPPLIES Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for the finisher.Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and transparency film. The supply of spare parts for r...

Page 7 - PART NAMES

7 PART NAMES Main power switch Tray 1 Tray 2 (when paper feed tray is installed)* Tray 3 (when paper feed tray is installed)* Tray 4 (when paper feed tray is installed)* Bypass tray Front cover Output tray (Centre tray) Automatic document feeder USB connector (A type) Exit tray unit (right tray)* [P...

Page 8 - TURNING THE POWER ON AND OFF; Turning on the power; Restarting the machine

8 TURNING THE POWER ON AND OFF This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key ( ) on the operation panel. Turning on the power (1) Switch the main power switch to the “ ” position.(2) Press t...

Page 9 - OPERATION MANUALS AND HOW TO USE THEM; Before using the machine; Start Guide: this manual; Printing and faxing from a computer; Operation manuals

9 OPERATION MANUALS AND HOW TO USE THEM The instructions for this manual are separated in the following three sections. Before using the machine Start Guide: this manual This section explains precautions to ensure safe usage, part names and how to switch on/off the power. This section also includes ...

Page 10 - SPECIFICATIONS; Basic Specifications / Copier specifications

10 SPECIFICATIONS Basic Specifications / Copier specifications Name MX-M364N/MX-M464N/MX-M564N Type Desktop Colour Monochrome Copier system Laser electrostatic copier Scanning resolution Scan (Document glass): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpiScan (Document Feeder): 600 × 600 dpi, 600 × 40...

Page 11 - Finisher

11 Required power supply Supplied from this machine Weight Approx. 12 kg (26.5 lbs.) Dimensions When output paper tray is stored 428 mm (W) × 593 mm (D) × 198mm (H) (16-55/64" (W) × 23-11/32" (D) × 7-51/64" (H)) When output paper tray is extended 612 mm (W) × 593 mm (D) × 198 mm (H) (24-...

Page 12 - Saddle stitch finisher

12 Name Saddle Stitch Finisher (MX-FN10) Paper sizes Depends on feeder specifications Useable paper Paper weight 55 g/m 2 (13 lbs.) to 300 g/m 2 (110 lbs. Cover) No. of trays 2 (Upper tray / Lower tray) Tray capacity (80 g/m 2 (21 lbs.)) Upper tray Non-stapled A3 wide (12" × 18") / A3 (11...

Page 13 - Network Printer Specifications

13 Name Facsimile expansion kit (MX-FX11) Useable lines General phone lines (PSTN), automated branch exchange (PBX) Connection speed Super G3: 33.6 kbps, G3: 14.4 kbps Coding method MH, MR, MMR, JBIG Connection mode Super G3 / G3 Original paper sizes for transmission A3 (11" × 17") to A5 (5-...

Page 14 - TO THE ADMINISTRATOR OF THE MACHINE; System settings password; Password for logging in from a computer; Important safety instructions

14 TO THE ADMINISTRATOR OF THE MACHINE System settings password A password is necessary to change the machine’s system settings using administrator authority. System settings can be changed from either the operation panel or using a computer web browser. After setting up the machine, refer to [SYSTE...

Page 15 - INFORMATION ON DISPOSAL; Information on Disposal for Users (private households); Information on Disposal for Business Users; In the European Union

INFORMATION ON DISPOSAL 15 Information on Disposal for Users (private households) � In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislati...

Page 16 - PRINTED IN FRANCE

MX-M364N/MX-M464N/MX-M564N QUICK START GUIDE PRINTED IN FRANCE TINSE5226GHZZ