Sharp MD-MT821 - Manuals

n Type of recording Two types of recording are possible: “Digital recording” and “Analog recording”. There aredifferent cables and connections for each type of recording, depending on the jacks on the equipment being connected to the unit. (1) Analog recording (2) Digital recording Connect the unit ...

After recording: Press the n /:OFF button while in the stop mode. After the track number has been written on the disc, the power will shut off auto- matically. (For details about the TOC, see page 20.) To remove the MiniDisc: Turn off the power and move the OPEN lever in the direction indicated by t...

n Recording from the microphone (Mic synchro recording) The recording will begin automatically in response to a noise or a person speaking. Whenthe sound stops, the recording will pause. This function is convenient when recording lectures, conferences, etc. Stereo microphone (commercially available)...

Creating marks while making a mic recording (Timed auto mark function) Marks can be created at a fixed interval(every 5 minutes is the default setting) so that the beginning of any track can be found. The interval at which marks are created can be changed by the user. While in the recording stand-by...

To erase tracks To erase tracks one at a time: 1 Start playing the track you want to erase, and press the button. The unit will enter the pause mode. 2 Press the EDIT button to select“ERASE”. Number of thepaused track 3 Press the ENTER/SYNC button. To cancel the operation, press the button. 4 Press ...

The TOC (an abbreviation for Table of Contents) is information about the track numbersand recorded areas that allow the unit to find musical selections or sounds. The entire MD is controlled by the information in this TOC, which enables the unit to find the beginning of a track quickly or to record ...

To play at double speed Random play or repeat play (Mono recording only) During playback or while in the stop mode, Press the ENTER/SYNC button while a press the MODE button (Remote control : MiniDisc recorded in the monaural long-play move the shuttle switch to PLAY MODE) mode is being played. repe...

To check the remainino recording time and the totalplaying time While in the stop mode, press the DISP button (Remote control: press the DISPLAY shuttle switch). Each time the button is pressed, the dis- play will change as follows: Remaining recording time Total playing time Note:If character infor...

n Move 1 Play the track to be moved, and press the button. The unit will enter the pause mode. 2 Press the EDIT button to select “MOVE”. To move the fifth track 3 Press the ENTER/SYNC button. To cancel the operation, press the button. 4 Move the REC LEVEL shuttle switch to select the direction to mo...

Combine 1 Start playing the last of the two tracksyou want to combine, and press the button. The unit will enter the pause mode. 2 Press the EDIT button to select “COM- BINE”. To combine the fifth and sixth tracks 3 Press the ENTER/SYNC button. To cancel the operation, press the button. 06 ? (Confir...

3 While in the stop mode, press the EDIT button to select “NAME STAMP”. 4 Press the ENTER/SYNC button. To cancel the operation, press the button. 5 Press the ENTER/SYNC button. The character information of the mas- ter MiniDisc is being read. 6 When the unit displays “CHANGE MD”, remove the master M...

n To eliminate the confirmation sound Every time a button is pressed, a “beep” will be heard in the headphones.To silence the “beep” sound, do the follow- While in the stop mode . . . Hold down the MODE button (Remotecontrol: move and hold the shuttle switchat PLAY MODE) until “SET UP” appears. When...

E r r o r m e s s a g e s M e a n i n g R e m e d y B a t t E M P T Y l The battery run down. l Charge the rechargeable battery or (Lo BAT-T) replace the alkaline battery (or use the AC adaptor for p o w e r B L A N K D I S C l Nothing i s recorded. l Replace the d i s c with a recorded disc. ( B L ...

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”). when shipped in Its original c o n t a i n e r will be free from defective workmanship and materials, and agreesthat It w i l l at its o p t i o n either repair the defect or replace...