Sharp LL-P202V - Manuals

7 E For information on the Pen Software, see the Pen Software Operation Manual. Supplied Components If any component should be missing, please contact your dealer. Component LL-S242A-W LL-P202V Liquid Crystal Display Monitor 1 AC adapter 1 Power cord 1 Digitizer pen - 1 Digitizer pen stand - 1 Digit...

8 E System Requirements n Touch panel To use the touch panel, the monitor must be connected to a computer using a USB cable. Touch panel operating conditions are as described below. Computer PC/AT compatible computer with a USB 1.1 port and able to output a resolution of 1920 x 1080. OS Windows 8.1 ...

9 E n Front view LL-P202V 1 1. Power LED (See page 18.) LL-S242A-W 1 Part Names n Rear view LL-P202V 1 2 3 3 4 5 7 8 10 9 11 6 1. VESA holes (See page 31.) 2. Anti-theft hole ( ) Allows the monitor to be secured using a commercially available anti-theft lock. The anti-theft hole is compatible with K...

10 E Binding Cables Caution • When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with the screen facing down. Video cable and USB cable Secure the video cable (HDMI or DisplayPort) and USB cable using the cable clamp. 1. Remove th...

11 E Connecting Devices Caution • Be sure to turn off the power and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Do not forcibly bend or apply force to cables. Doing so may result in wire breakage or other...

12 E TIPS • The length of the signal cables or surrounding environment may affect the image quality. • The video from the terminal that has signal input is displayed. In this state, even if a signal is input from the other terminal, the display is not switched. To switch the display, use [Input Sele...

13 E Connecting the Monitor to a Power Source Caution • Use only the AC adapter and power cord supplied with the monitor. 1. Connect the monitor to the power outlet using the supplied AC adapter and power cord. AC adapter core Core restrainer Back of monitor AC adapter connection terminal Power cord...

14 E Installation You can install the touch display for each monitor in the following positions. Installation position LL-S242A-W LL-P202V Standing position Rack stand Yes No Variable stand No Yes Pen writing position No Yes Horizontal position Yes Yes Installing on a stand (Standing position) n LL-...

15 E n LL-S242A-W Placement on the rack stand Place the unit on the supplied rack stand. 1. Attach the back of the stand to the front. Place the front and back sides together, and attach the hinge. Back Front Front hinge part BackSupport Tape Front Back hinge part 2. Spread the base of the front and...

16 E Portrait orientation Run the cables along the hollow on the front side and out between the legs of the back side. 7. Secure the monitor to the stand using the two fixing screws. Landscape orientation Fixing screws (supplied) Portrait orientation Fixing screws (supplied) Disassembling the rack s...

17 E Installing on a table (Pen writing position/Horizontal position) Remove the monitor from the stand and place face-down on a table or other level surface. Caution • Do not exert a large amount of force on the monitor from above. Doing so may damage the flap. (LL-P202V) • After removing the monit...

18 E Turning on the power 1. Press the POWER button. Press POWER button Power LED The power LED turns on. 2. Turn on the PC. The screen appears. Status Status of the monitor Green lit Signal input Orange lit No signal input Alternately flashing red and green Abnormal temperature Caution • When switc...

19 E Installing the Software To use the touch panel or the supplied digitizer pen, the required software must be installed for the operating system of the connected computer. The required software is given below. LL-S242A-W LL-P202V Windows 8.1 / 8 Windows 7 Windows Vista Windows 8.1 / 8 Windows 7 W...

20 E Touch Actions Touch action modes There are three touch action modes: finger/pen mode, pen- only mode, and finger-only mode. These modes can be changed on the menu screen. The monitor is set to finger/pen mode when shipped. Caution • Use the supplied pen (digitizer pen or touch pen) in pen mode....

21 E Drag-and-drop Touch the screen with your finger/pen and move without lifting. When you have finished the movement, lift your finger/pen. Slide to pan With your finger/pen touching the screen, move it up and down to scroll the screen. Flicks Move your finger/pen in a flicking motion. Flick your ...

22 E Digitizer pen The LL-P202V monitor supports a digitizer pen. To use the digitizer pen, the utility software must be installed. (See page 19.) n Digitizer pen actions Button operations Function button 2 Function button 1 Pen tip Function button 1: Pressing and holding this button and touching th...

23 E n Spare pen tip storage The pen stand features a pen tip storage area where you can store spare pen tips. TIPS • Spare pen tips are not stored in the stand at the time of purchase. Store the spare pen tips in the pen stand to make sure you do not lose them. 1. Remove the spare pen tip storage c...

24 E Monitor Settings Menu operations The monitor settings are configured by displaying the menu screen. The operations on this page are the basic operations. Caution • Do not turn off the power while the menu screen is displayed. Doing so may initialize the settings. • While the menu screen is disp...

25 E Monitor Settings Touch mode selection These icons switch the touch action mode. A ( ) mark is displayed at the top of the icon for the selected mode. The mode can be checked using the touch mark located on the right-side of the screen. (See pages 26, 28) On the LL-P202V, the icon pen design var...

26 E Monitor Settings SETUP Menu Details Position Menu Position When the monitor is used in portrait orientation (power/menu button on the top), this icon moves the display position of the menu screen to the bottom of the screen. Mode Mode Normal This mode is suited to normal PC screen display. Pen ...

27 E Monitor Settings Prohibiting operations (operation lock) This function makes it possible to prohibit operations to turn the power off and to prohibit touch action on the screen. If an operation is attempted when the monitor is locked, a key mark is displayed for around 5 seconds. Caution • When...

28 E Monitor Settings n Disabling operation lock 1. Press the MENU button. The menu screen is displayed. Press MENU button 2. While touching [Input Select], touch [Finger-only mode] for at least 1 second. Operation lock is disabled. Monitor status indicators The status is displayed on the right-side...

29 E Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Are the AC adapter and power cord connected correctly? (See page 13.) • Is the power on? (See page 18.) There is a...

30 E Specifications n Product Specifications Model LL-S242A-W (white) LL-P202V LCD component 24” Class [23-5/8” (60.0 cm) diagonal] TFT LCD 20” Class [19-1/2” (49.5 cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 16.70 million colors Approx. 16.77 million colors Pixel ...

31 E Specifications n Dimensional Drawings Note that the values shown are approximate values. LL-S242A-W 1-15/16 [50] 1-15/16 [50] 1-15/16 [50] 1-15/16 [50] 13-5/16 [ 338. 3 ] 22-5/16 [566.4] 1-1/8 [28.7] (excluding protrusions) Unit: inch [mm] VESA holes * Screen display size (1 1-9/16 [293.2]) Scr...

32 E Specifications LL-P202V 4-9/16 [116.5] 11-5/16 [287.9] 5-1/2 [137.6] 12-11/16 [323] 1-1/ 8 [28.7] * 1-1/2 [38.2] * 20° 75° (20 degrees) (75 degrees) * Height of bottom of screen from table surface n Pen writing position (LL-P202V) 9/16 [13.9] 2-3/8 [60.7] 10-13/16 [275.3] n Supported frequency ...

33 E n HDMI input terminal pins (HDMI TM Connector) No. Function No. Function 1 TMDS data 2+ 11 TMDS clock shield 2 TMDS data 2 shield 12 TMDS clock- 3 TMDS data 2- 13 CEC 4 TMDS data 1+ 14 N.C. 5 TMDS data 1 shield 15 SCL 6 TMDS data 1- 16 SDA 7 TMDS data 0+ 17 DDC/CEC GND 8 TMDS data 0 shield 18 +...