Sharp LC-70LE857EN - Manuals

3 Introduction Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemica...

4 Supplied accessories Remote control unit ( x 1) “AAA” size battery ( x 2) Pages 7 and 9 Page 7 Stand unit ( x 1) For 60/70 inch models For 80 inch models Page 5 Page 6 Wireless LAN USB adapter (WN8522D 7-JU) ( x 1) AC cord ( x 1) (For 80 inch models only) Page 65 Page 10 Initial setup guide (print...

5 Attaching the stand unit (for 60/70 inch models) • Before attaching (or detaching) the stand, unplug the AC cord.• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. • Be sure that two or more persons attach the s...

6 Attaching the stand unit (for 80 inch models) • Before attaching (or detaching) the stand, unplug the AC cord.• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. • Be sure that two or more persons attach the stan...

7 Using the remote control unit Inserting the batteries Before using the TV for the first time, insert the two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover...

8 TV (front/side view) Illumination LED* 1 Remote control sensor (Page 7) OPC sensor (Page 36) a (Standby/ON) MENU (Menu) b (Input source) :r/s (Programme [Channel]) i+/- (Volume) This panel emits a signal towards the 3D glasses you wear when viewing 3D images. Refer to page 76 for details. I 3D mod...

9 Remote control unit 4 5 3 6 78 11 12 13 10 2 1 15 14 16 17 1819 21 22 23 24 9 20 LC-60LE855ELC-60LE857E/RULC-60LE858ELC-70LE857E/RULC-70LE858ELC-80LE857E/RULC-80LE858E 25 LC-60LE855KNLC-60LE857ENLC-70LE857EN/KNLC-80LE857EN/KN Important information: Satellite services are only available for the 857...

10 Operation overview Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection. 1. Preparation — Connecting the TV w For 60/70 inch models w For 80 inch models q q p r q o n NOTE • The cable tie can be moved from to . • Pla...

12 Inserting the CA card into the CI module NOTE • It takes a few minutes to certify the licence key when you insert a CA card into the CI+ compatible CI module for the first time. This process may fail when there is no antenna input or you have never run “Auto installation”. • The CI+ compatible CI...

13 Quick guide Using the HOME screen You can easily launch this “HOME” screen to enjoy Internet connection and Home network functions and to perform settings for the TV. LCFONT This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-r...

14 Using the Menu screen You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. Display the Menu screen  Go to “TV Menu”. • You can also display the Menu screen via the HOME menu screen (Page 13). S...

15 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC ...

16 Digital broadcast setting Press c/d to select “Terrestrial” or “Cable”, and then press ; . Terrestrial Cable E Searching for terrestrial broadcasts The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna. • To abort the initial au...

17 Searching for satellite broadcasts (857 series only) Press a/b to select “Satellite search”, and then press ; . Digital search Analogue search Satellite search • The antenna connection setting screen is displayed. Single satellite 2 satellites on toneburst switchbox Max. 4 satellites on DiSEqC mu...

18 Checking signal strength and channel strength (DVB-T/T2/C/S*/S2*) If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. * 857 series only 1 Go to “TV Menu” >...

19 Daily operation Switching on/off Turning on/off the power 1 Turn on ( ; )/off ( a ) the MAIN POWER switch on the rear of the TV (Page 8). 2 To turn on/off the TV, press a on the TV or >a on the remote control unit. NOTE • When turning off the power using the MAIN POWER switch on the rear of th...

20 Selecting a sound mode E DTV/SAT mode If multi sound modes are received, each time you press 7 the mode switches as follows. Audio (ENG) STEREO L/R L R LR CH A CH B CH AB Audio (ENG) CH A Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed. Audio (EN...

21 Favourite Channel Information Before installation This function allows you to group your favourite channels in a separate list. Pre-setting “My favourite” in advance allows you to select your favourite channels more conveniently. NOTE • “My Favourite” can only be used for DTV and SAT(*) modes, a ...

22 EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SAT/RADIO/DATA, view detailed information about them and tune to an event currently on-air. Useful settings for using EPG View setting EPG If you want to use the EPG for digital stations,...

23 Selecting a programme using EPG The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG . Select Enter Back Exit AM PM Programme info. Search by genre Search by date Timer list NOTE • You can also display the EPG screen from “TV Menu” > “...

24 Timer setup using EPG The TV can be switched to a programme or start recording for USB-recording at the set time. 1 Press EPG . 2 Press a/b/c/d to select the programme you want to set, and then press ; . Back to EPG Watch No Record Next 3 Press c/d to select “Watch” or “Record”, and then press ; ...

25 Teletext What is teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programm...

26 Watching TV MHEG-5 application (UK only) Some services bring you programmes with the MHEG application encoded, letting you experience DTV interactively. When provided, the MHEG-5 application will start when you press m . NOTE • MHEG may not be displayed properly in 3D mode.• You can view some MHE...

27 Introduction to connections The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and connect the device. E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or te...

28 Video connections HDMI connection Example of connectable devices E DVD player/recorder E Blu-ray player/recorder E Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted withou...

29 Connecting external devices SCART connection Y P B ( C B) P R ( C R) Component connection Example of connectable devices E VCR E DVD player/recorder n  SCART cable (commercially available) NOTE • Regarding the external output: − You can record programmes viewed on the TV with an external recordi...

30 VIDEO connection Example of connectable devices E VCR E DVD player/recorder E Game console E Camcorder You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device. n  AV cable (commercially available) Audio connections Speaker/amplifier conn...

31 Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE • AQUOS LINK-compatible AQUOS ...

32 AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol. Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD player/AQUOS recorder only AQUOS BD player/AQUOS reco...

33 AQUOS LINK setup Basic operation Go to “TV Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set. AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled. While the TV is in standby ...

35 AQUOS LINK Using a Smartphone with the TV This function enables you to connect the TV to a smartphone that supports Mobile High-Definition Link (MHL) using an MHL-compatible cable.To connect the TV to your MHL-compatible smartphone, be sure to use an MHL-compatible cable (commercially available)....

36 Picture settings Go to “TV Menu” > “Setup” > “Picture”. Setup AV mode Picture Clear Picture Processing CH list :Back :Enter Menu Backlight OPC [Off] Picture AV mode “AV mode” gives you several viewing options to choose from to best match the system environment, which can vary due to factors...

37 Picture Picture adjustments Adjusts the picture to your preference with the following picture settings. Adjustment items Selectable items c (Cursor) d (Cursor) Backlight The screen dims The screen brightens 3D brightness boost Refer to page 76 for details. Contrast For less contrast For more cont...

40 Power save settings Go to “TV Menu” > “Setup” > “ECO”. Setup No signal off ECO picture control ECO Energy save CH list :Back :Enter Menu No operation off [Disable] [Disable] [Off] [On] ECO ECO picture control This function automatically detects the image source and decreases the power consu...

41 View settings Go to “TV Menu” > “Setup” > “View setting”. Setup Network setup Auto installation View setting Channel settings CH list :Back :Enter Menu Select recording device View setting Auto installation The TV automatically detects and stores all available services in your area. This fu...

42 Buttons for “Manual adjust” operation Lock Press R button. When the service is locked, you must enter your PIN whenever you tune to the service. CH skip Press G button. Services with a ✔ mark are passed over when pressing :r/s on the TV or remote control unit. Delete Press Y button. The selected ...

43 Analogue setting You can reconfigure the analogue TV channels settings automatically or manually. E Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour s...

44 Individual setting — PIN View setting PIN Allows you to use a PIN to protect certain settings from being accidentally changed. Go to “TV Menu” > “Setup” > “View setting” > “Individual setting” > “PIN”. NOTE • PIN input is required when executing “PIN”. The default PIN is “1234”. To re...

45 Individual setting — Language View setting Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available. Go to “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. E Switching the multi audio ...

46 Optional features settings Go to “TV Menu” > “Setup” > “Option”. Setup Option for view Option 3D setup CH list :Back :Enter Menu Terminal setting Colour system Selecting the picture size manually Option Wide mode You can select the picture size. Selectable picture size varies with the type ...

47 Terminal setting Option Digital audio output This function allows you to select the digital audio signal type. Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital audio output”. Item PCM To stereo audio system Bitstream To multi-channel Dolby Digital, DTS audio system...

49 Additional features Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “TV Menu” > “Setup” > “Option” > “Illumination”. Item Off The LED is not illuminated. Standby The LED is illuminated while the TV is in standby mode. Watch The LED is...

50 Option Game play time This function allows you to display the elapsed time on the screen when “AV mode” is set to “GAME”. Go to “TV Menu” > “Setup” > “Option” > “Game play time”. Item On Under connecting a game console to the TV, the elapsed time is displayed in 30-minute increments afte...

51 USB-recording You can enjoy DTV/SAT recording or playback by connecting a commercially available USB HDD to the TV. • USB-recording does not work for ATV, external inputs, data broadcasts, radio broadcasts or network applications. Connecting a USB HDD Connect a commercially available USB HDD to t...

52 How to operate USB-recording You can enjoy DTV/SAT recording or playback by connecting a commercially available USB HDD to the TV. CAUTION • Do not unplug the AC cord or turn off the MAIN POWER switch during USB-recording timer setting or USB-recording. • When the AC cord is unplugged and the MAI...

53 USB-recording You can record the programme you are watching to the registered USB HDD. Starting USB-recording Press REC E . • The TV starts USB-recording. NOTE • You can also operate from the control panel by pressing CONTROL . • You cannot switch the channel or the input source during USB-record...

54 Time shift playback Playback recorded scenes of the programme being recorded. Press d during recording. • Press H to return the scene that is broadcasting. NOTE • You can also operate from the control panel by pressing CONTROL . • Time shift playback may take a few moments to start.• Time shift p...

55 USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE • To connect a Home network server, refer to Network...

56 Viewing enlarged photos Buttons for enlarged photo display operation(When using USB media mode) Buttons Description c/d (Cursor) Go to the previous/next photo in the same directory. 6 Return to the thumbnail selection screen. 3D Switch between 2D and 3D modes. R button Rotate the photo by 90 degr...

57 Video mode Buttons for file selecting operations(When using USB media mode) Buttons Description ; When selecting a folder icon: Enter this directory.When selecting a video file: Play the video. a/b/c/d (Cursor) Select a desired item. 6 All*: Return to the previous screen.Folder*: Return to the up...

58 View setting DivX® setup This is the function to confirm your registration code. You need to register the code at www.divx.com. Go to “TV Menu” > “Setup” > “View setting” > “DivX® setup”. E DivX® VOD registration You can find your registration code on this menu. You need to register the ...

59 Connecting a PC HDMI connection PC HDMI 1, 2, 3 or 4 terminal  HDMI-certified cable (commercially available) PC HDMI 2 terminal*  ø 3.5 mm stereo minijack cable(commercially available)  DVI/HDMI cable(commercially available) * When using the HDMI 2 terminal, you must select the proper item in ...

60 Adjusting the PC image automatically Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” from...

62 PC control of the TV • When a programme is set, the TV can be controlled from the PC using RS-232C or IP. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial ...

63 Command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF (STANDBY) INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) I T V D _ _ _ _ TV (CHANNEL FIXED) I D T V _ _ _ _ DTV (CHANNEL FIXED) I A V D * _ _ _ EXT 1 _ 3 (1 _ 3), HDMI 1 _ 4 (4 _ 7), P...

64 Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOT...

65 Wireless installation Use the wireless LAN USB adapter supplied with the TV. E Wireless connection overview  PC  Wireless LAN router/access point  Wireless LAN USB adapter (supplied)  Network NOTE • When using the SHARP wireless LAN USB adapter (supplied), try to provide as much free space ar...

66 What is Net TV? Net TV offers internet service and websites tailored for your TV. Use the TV remote control unit to browse the Net TV internet pages. Net TV allows you to play movies, view pictures, listen to music, play games, rent a movie from a video store* and much more. Net TV provides varie...

67 Net TV E Reload Refreshes the page you are browsing. If an error occurs while loading the page, execute this function and reload it. Select “Reload”, and then press ; . E Zoom Adjusts the display size of the page you are browsing. Zoom [100] 20 400 : Adjust END : Exit 1 Select “Zoom”, and then pr...

68 You can enjoy 3D-supported images on this TV when you wear 3D glasses (AN-3DG40), sold separately.To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. NOTE • Refe...

69 Enjoying 3D image viewing Preparing for the 3D glasses Supplied accessories Make sure the following accessories are provided with the 3D glasses. 3D glasses x 1 Nose pad* (small x 1, large x 1) Glasses case x 1 Cleaning cloth x 1 Operation manual * Use the 3D glasses nose pad as needed. The small...

70 Using the 3D glasses Before using the 3D Glasses Before using the 3D glasses for the first time, remove the insulating sheet attached to them. Attaching the Nose Pad Attach either of the supplied nose pads as needed (such as when the glasses do not fit properly). The glasses come with a large and...

71 Replacing the Battery The battery has an expected service life of approximately 75 hours. • When replacing the button battery, use only the designated battery (Maxell branded CR2025 lithium button battery). 1 Use the tip of a ballpoint pen or similar object to press in on the lock. 2 While pressi...

72 Enjoying 3D image viewing Cautions for 3D image viewing 3D glasses lenses • Do not apply pressure to the lenses of the 3D glasses. Also, do not drop or bend the 3D glasses.• Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object. Doing so may damage t...

73 Display format for 3D and 2D images Image for input signals Selectable mode Description 3D mode (using the 3D glasses) 2D s 3D • Converts normal 2D images into 3D images. Side by Side • Creates 3D images from 3D images displayed side by side. The image is split into a left and right image, and th...

74 Viewing 3D images NOTE • Refer to the operation manual of the 3D glasses for details regarding usage. • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D image signal that can be detected automaticall...

75 Watching 2D images in 3D You can convert normal 2D images into 3D images. 1 Press 3D . 2 Press c/d to select “2D s 3D”, and then press ; . 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. NOTE • The confirmation message to select either 3D or 2D mode is displayed on the screen...

76 3D brightness boost You can adjust the backlight of the TV for 3D image viewing. Item High The screen brightens Middle Low The screen dims NOTE • When “High” or “Low” is selected, “OPC”, “Backlight” and “Range of OPC” are not available. • The “3D brightness boost” is not available for 2D mode.• T...

77 Enjoying 3D image viewing Specifications — 3D glasses (sold separately) Troubleshooting — 3D Images Product 3D Glasses Model number AN-3DG40 Lens type Liquid crystal shutter Power supply DC3V Battery Lithium button battery (CR2025 x 1) Battery life Approx. 100 hours of continuous use Dimension (W...

78 Appendix Troubleshooting Problem Possible solution • No power. • Turn on ( ; ) the MAIN POWER switch on the rear of the TV (Page 19). • Is the AC cord disconnected?• Check if you pressed a on the TV. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., m...

80 Updating your TV via DVB-T/T2/C/S*/S2* Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. * 857 series only View setting Download setup Go to “TV Menu” > “Setup” > “View setting” > “Individual ...

81 Information Receiver report Display reports regarding failures and changes for timer settings. Go to “TV Menu” > “Setup” > “Information” > “Receiver report”. Information Identification You can check the TV ID on the screen for reporting to customer service. Go to “TV Menu” > “Setup” &...

82 Warning regarding basic use Cautions regarding use in high and low temperature environments • When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the TV will recover when the temperature retur...

83 Software licences for Net TV This product includes the Opera™ browser. • This product contains fonts provided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. • ...

84 Appendix Specifications Item Model: LC-60LE855E/LC-60LE855KN/LC-60LE858E/LC-70LE858E/LC-80LE858E Model: LC-60LE857E/LC-60LE857RU/LC-60LE857EN/LC-70LE857E/LC-70LE857RU/LC-70LE857EN/LC-70LE857KN/LC-80LE857E/LC-80LE857RU/LC-80LE857EN/LC-80LE857KN LCD panel 203 cm (80 o ) X-Gen panel 177 cm (70 o ) X...

85 Specifications (Wireless LAN USB adapter) Product name Dual Band 802.11n USB2.0 adapter Standard IEEE 802.11a/b/g/n Host interface USB2.0 Frequency band 2412 _ 2484 MHz 5150 _ 5850 MHz Security Static WEP (64/128 bit, key index 1 only)WPA-PSK (TKIP)WPA2-PSK (AES) Modulation DBPSK@1 MbpsDQPSK@2 Mb...

86 Environmental specifications Item 60 o /70 o /80 o I On-mode (W) (in home-mode) 108 W/142 W/178 W J Energy-Save-Mode (W) Advanced 78 W/98 W/125 W K Standby-Mode (W) 0.2 W/0.2W/0.2W L Off Mode (W) MAIN POWER switch 0.01 W or less M Annual Energy Consumption (kWh) 158 kWh/207 kWh/ 260 kWh M Annual ...

87 LC-80LE857E/LC-80LE857RU/LC-80LE858E/LC-80LE857EN/LC-80LE857KN The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the product. We recommend you to contact qualified service peronnel...

89 Appendix Dimensional drawings (385) (58) (28) *2 (178) LC-60LE855ELC-60LE857ELC-60LE857RULC-60LE858ELC-60LE855KNLC-60LE857EN (176) (640) (1378) (848) (810) (748) *1 (451) (1329) *1 (400) (400) (200) (575) (385) (58) (28) *2 (178) LC-70LE857ELC-70LE857RULC-70LE858ELC-70LE857ENLC-70LE857KN (251) (6...

91 Appendix EU Energy Label for Televisions On 30 November, 2010 the European Commission adopted the Commission Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of televisions. The Regulation entered into force on 20 December 2010 and applies in all Member States. Manufacturers...