Sharp LC-60LE640X - Manuals
Sharp LC-60LE640X – Manual in PDF format online.
Manuals:
Manual Sharp LC-60LE640X
Summary
1 OPERATION MANUAL ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Contents ENGLISH Introduction .........
3 Precautions For Daily Use Observe the following items Maintenance of the cabinet • When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently.• Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate o...
4 Introduction • Do not place vases or any other water-filled containers on this product.The water may spill onto the product causing fire or electric shock. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious p...
5 Introduction 3D Glasses Prevention of accidental ingestion • Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts. – If a child accidentally swallows any of these parts, seek immediate medical attention. Do not disassemble • Do not disassemble ...
6 AV cable ( x 2) Component cable ( x 1) Yellow Green Page 28 Page 28 Supplied accessories Introduction Optional accessories Some of the listed optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorised Dealer for current optional accessories a...
7 Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant measurement for your safety. Anchoring the TV to the wall or a pillar 1 Affix the TV to the wall or a pillar using extra strong ties and ...
8 Attaching the stand unit • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may resu...
9 Preparation Connecting the TV Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location.• Do not turn on the power of the TV before connecting the AC cord. 1 Connect the antenna cable. n o p Standard DIN45325 connector (...
10 Using the remote control unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2...
11 TV (front view) POWER OPC SLEEP POWER MENU INPUT VOL + /− CH 3D infrared emitter *1 Remote control sensor OPC sensor *2 POWER indicator SLEEP timer indicator OPC indicator *1 This panel emits infrared signal towards the 3D glasses you wear when viewing 3D images. Do not place anything between the...
12 TV (rear view) AUDIO (L / R) (WIRELESS LAN) OUTPUT AUDIO (L/R) is shared with AV IN) DIGITAL AUDIO OUTPUT AUDIO IN (HDMI 2/PC) USB 1 port OUTPUT (Headphones/ AUDIO (L/R)) terminal* 1 USB 2 port(WIRELESS LAN) HDMI 1 (HDMI/ARC) terminal (INPUT 1) HDMI 2 (HDMI) terminal (INPUT 2) HDMI 3 (HDMI) termi...
13 Part names and functions Remote control unit EXT MEDIA TV INFO MENU GUIDE SLEEP 5 6 15 16 2 1112 8 9 10 7 1 27 28 13 4 17 * 18 14 25 26 2223 20 19 21 24 3 1 < (Standby/On) To switch the power on and off (Page 17). 2 EXT MEDIA buttons AQUOS LINKIf external equipment such as a AQUOS BD player is...
14 Quick guide What is the HOME? You can easily launch to enjoy Internet connection and Home network function and to perform settings for the TV from this “HOME” screen.By connecting the TV to the internet you can enjoy a variety of broadband content. Internet browsing on a TV behaves differently to...
15 Quick guide Using software keyboard Use the software keyboard when you need to input text. Char.Set Caps Cancel Done Delete Clear Cursor Left Caps Char.Set Cursor Right 1 Char. Set Changes character set into the alphabet, numbers, symbols, etc. 2 Caps Changes characters to capital/lower case. 3 D...
16 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC ...
17 Daily operation Turning on/off the power – using the control panel of the TV Turning on/off the power 1 Turn on the power. Press < on the TV (after a few seconds, an image appears with sound). • Wait more than five seconds until you press < on the TV after inserting the power plug. 2 Turn o...
18 Watching TV (DTV only) Press > to change “DTV” or “ATV”. NOTE • When watching Digital Radio or Data broadcasting, the image is switched to DTV. • When watching external video source, the image is switched to ATV or DTV, which was watched lastly. CH list You can check the CH list and view detai...
19 Switching the digital audio format (DTV only) If multi sound modes are received, each time you press MPX the mode switches as follows. Audio (ENG) STEREO L/R L R LR CH A CH B CH AB Audio (ENG) CH A Audio (ENG) MONO Press c / d to select L or R sound when the STEREO or DUAL MONO screen is displaye...
20 Teletext What is teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programm...
21 View setting Initial teletext page (DTV only) If you set the language of the initial page (this page is displayed for the first time after pressing m ) for teletext in DTV mode, it will start from the selected language page. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Ind...
22 Watching TV EPG (DTV only) EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO/DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic setting View setting EPG If you want to use ...
23 Selecting a programme using EPG (DTV only) Basic operation E Display the EPG screen Press GUIDE . GUIDE EPG 001 20 21 22 23 0 1 : Select : Enter : Back : Exit Programme info. Search by genre Search by date Timer list [Fri] 1/4 20:00 Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8 EPG [DTV-...
24 4 Search a programme in a category 1 Press G . 2 Press a / b to select the desired genre, and then press ? . 3 Press a / b to select a programme you want to watch, and then press ? . EPG [DTV-TV] [Fri] 1/4 20:00 Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8 Back to EPG : Select : Enter :...
25 Watching TV Timer setup using EPG You can switch to a programme at a set time. 1 Press GUIDE . 2 Press a / b / c / d to select the programme you want to set, and then press ? . Back to EPG Programme info. Next Watch No Time shift 3 Press c / d to select “Watch” or “Time shift”, and then press ? ....
26 E Before connecting ... • Be sure to turn off the TV and any devices before making any connections.• Firmly connect a cable to a terminal or terminals.• Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual...
27 Connecting external devices Video connections HDMI connection Example of connectable devices E DVD player/recorder E Blu-ray player/recorder E Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound...
28 Connecting external devices Y P B ( C B) P R ( C R) Component connection Example of connectable devices E VCR E DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the INPUT 5 terminal when connecting a DVD player/recorder or other device. IN AUDIO (L/R...
29 Audio connections Speaker/amplifier connection Connect an amplifier with external speakers as shown below. E Connecting an amplifier with digital/analogue audio inputs AUDIO (L / R) OUTPUT n o DIGITAL AUDIO OUTPUT Optical audio cable (for digital audio) (commercially available) Stereo convers...
30 AQUOS LINK Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit.By connecting AQUOS LINK-...
31 AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol. NOTE • Refer to the operation manual of the device to be connected for further details.• After unplugging connection cables or changing the connection patte...
32 AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit. EXT MEDIA Use the following procedure to start playback. 1 Press I to start playback of a title. • See the section Top menu/title list if you want to start playb...
33 AQUOS LINK AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. • The factory default for this item is “Off...
34 MENU MENU E Auto power on When an MHL-compatible device is connected to the TV, the TV turns on automatically. • This function operates when “AQUOS LINK control” is set to “On”. (See page 33.) E Auto input selection When an MHL-compatible device is connected while the TV is on, the input mode is ...
35 Picture settings Go to “HOME” > “TV Menu” > “Setup” > “Picture”. Setup AV mode Picture OPC [Off ] [STANDARD] [STANDARD] CH list :Back :Enter Menu Backlight Contrast +40 [ +32] 0 : Select NOTE • After selecting a menu such as “AV mode”, “OPC”, “Backlight”, “Contrast”, “Brightness”, “Colou...
36 Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “HOME” > “TV Menu” > “Setup” > “Picture” > “Advanced”. C.M.S.-hue This function adjusts the hue of a selected colour using a six-colour adjustment system. C.M.S.-saturation This func...
37 Range of OPC The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16. NOTE • This function is available only when the “OPC” setting is set to “On” or...
38 Audio Surround This function produces a surround effect from the speakers. Item 3D Stadium Reproducing lifelike experience of excitements such that live sports or concert performances in a stadium create. 3D Hall Reproduces a concert hall experience with realistic live surround sound based on rev...
39 Power save settings Go to “HOME” > “TV Menu” > “Setup” > “ECO”. Setup No signal off ECO picture control ECO Energy save CH list Menu No operation off [Disable] [Disable] [Off] [On] :Back :Enter : Select NOTE • You can also select “ECO” by pressing ECO . ECO ECO picture control This funct...
40 Channel settings Go to “HOME” > “TV Menu” > “Setup” > “View setting”. Setup Network setup Auto installation View setting Channel settings CH list Menu Select recording device [USB storage] :Back :Enter : Select View setting Auto installation The TV automatically detects and stores all av...
41 Basic adjustment Buttons for “Manual adjust” operation Lock Press R button. When the service is locked, you must enter your password whenever you tune to the service. CH skip Press G button. Services with a mark are passed over when pressing CH r / s on the TV or remote control unit. Delete Pre...
42 Label When a TV channel sends its network name, the “Auto installation” detects the information and assigns a name to it. However, you can change channel names individually. Select each character of the new name for the channel with using the software keyboard (see page 15). NOTE • The name can b...
43 Individual setting – Password View setting Password Allows you to use a password to protect certain settings from being accidentally changed. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Password” . E Setting a password Register a four-digit passwor...
44 Example of time difference with GMT Local GMT off set Canberra Sydney +10:00 SingaporeKuala Lumpur +8:00 BangkokJakarta +7:00 New Delhi +5:30 Cairo +2:00 NOTE • If you select “No”, the TV will try to get the time for the broadcast. Time display This function allows you to display the clock time i...
45 Optional features settings Go to “HOME” > “TV Menu” > “Setup” > “Option”. Setup Option for view Option 3D setup CH list Menu Terminal setting Colour system [Auto] :Back :Enter : Select Selecting the picture size manually Option Wide mode You can select the picture size. Selectable pictur...
46 Option 4:3 mode The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Full”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”. Item Full Wide image without side bars. Normal Normal range keeping 4:3 or 16:9 aspect ratio. WSS signal 4:3 scree...
47 Option Input label You can label each input source with a custom description. 1 Press b to select the desired input source from the “INPUT” menu, and then press ? . 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”. 3 Press ? to display the softwa...
48 Option Headphone out setting You can select the headphone/speaker audio output when using the headphones. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone out setting”. Item Headphone Audio output from headphones only. Dual Audio output from headphone...
49 Additional features Option Game play time This function allows you to display the elapsed time on the screen when “AV mode” is set to “GAME”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Game play time”. Item On Under connecting a game console to the TV, the elapsed time is displa...
50 Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOT...
51 NOTE • When using the SHARP wireless LAN USB adapter (optional accessory), try to provide as much free space around the device for best performance. • A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the wireless LAN signal m...
52 Network function Specifications (Wireless LAN USB adapter) Product name 802.11n Dual Band WLAN adapter Standard IEEE 802.11a/b/g/n Host interface USB Frequency band 2412 f 2484 MHz 5150 f 5850 MHz Security Static WEP (64/128 bit, key index 1 only)WPA-PSK (TKIP)WPA2-PSK (AES) Modulation DBPSK@1 Mb...
53 Network function Using AQUOS.NET By connecting the TV to the Internet, you can enjoy a variety of broadband content. 1 Press HOME to display the “HOME” screen. 2 Press a / b / c / d to select “AQUOS.NET” service, and then press ? . LAN HOME • If “ ” is displayed, check your TV’s network settings ...
54 Clear browser setting You can clear browser setting, which includes cookies, bookmarks and caches.Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Clear browser setting”. NOTE • Password input is required when executing “Clear browser setting” if Password is set. CAUTION • If yo...
55 Network function DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in ac...
56 Other useful features Using a USB device The TV provides you some functions using a USB device. You can select which function to use after inserting a USB device in the USB port, and the TV starts the settings for each function. USB usage E Storage device for time shift E USB media to enjoy photo...
57 Other useful features Disconnecting the USB device When you disconnect the USB device, be sure to the following steps. For time shift Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Device removal”. NOTE • This menu item cannot be selected when a USB s...
58 Time shift recording You can record the programme you are watching to the registered USB storage device. Starting time shift recording Press REC E . • The TV starts time shift recording. NOTE • You can also operate from the control panel by pressing CONTROL . • You cannot switch the channel or th...
59 Time shift playback Playback recorded scenes of the programme being recorded. Press d during time shift recording. • The last recorded programme can be replayed after the end of recording. • Press H to return the scene that is broadcasting. NOTE • You can also operate from the control panel by pr...
60 Other useful features View setting Device registration You need to perform this function to register the USB storage device for the time shift. Go to “HOME” > “TV Menu” > “Setup” > “View setting” >“Time shift setting” > “Device registration”. • Refer to For time shift (Page 57) for...
61 USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE • To connect a Home network server, refer to Network...
62 Photo mode Viewing thumbnails * This screen image is for the USB media mode. It may be slightly different in the Home network mode. Buttons for thumbnail operations(When using USB media mode) Buttons Description ? When selecting a folder icon: Enter this directory.When selecting a photo thumbnail...
63 Slide show E Selecting the BGM Setup the slide show BGM from “Select slide show BGM” by pressing B when selecting photo thumbnails. This function is available only for the USB media mode. Buttons for slide show BGM select operation Buttons Description ? When selecting a music file: Play music. a ...
64 Video mode 16 Files 8 Files 15 Files 15 Files 10 Files Buttons for file selecting operations(When using USB media mode) Buttons Description ? When selecting a folder icon: Enter this directory.When selecting a video file: Play the video. a / b / c / d (Cursor) Select a desired item. C Return to t...
65 Other useful features Selecting the picture size for video mode You can select the picture size in “Video mode”. 1 Select “Video mode”. • Refer to Selecting modes and drives/servers on page 61. 2 Press WIDE . • The “Wide mode” menu displays. 3 Press WIDE or a / b to select the desired item. • As ...
66 Connecting a PC HDMI connection PC HDMI 1, 2, 3 or 4 terminals n HDMI-certified cable PC HDMI 2 terminal* o p DVI/HDMI cable 3.5 mm stereo minijack cable * When using the HDMI 2 terminal, you must select the proper item in the “Audio select” menu depending on the type of HDMI cable connecte...
67 Adjusting the PC image automatically Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” from...
68 PC control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C or IP. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C ser...
69 Command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF (STANDBY) INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) I T V D _ _ _ _ TV (CHANNEL FIXED) I D T V _ _ _ _ DTV (CHANNEL FIXED) I A V D * _ _ _ HDMI 1 f 4 (1 f 4), INPUT 5 f 6 (5 f 6),...
70 You can use special 3D glasses to watch 3D-supported images on this TV. • You can enjoy 3D movies on this TV by viewing the movie through 3D glasses, sold separately.• To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match al...
71 Viewing 3D images MENU MENU NOTE • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D image signal that can be detected automatically The image signal may contain a 3D identification signal. You can en...
72 Enjoying 3D image viewing Watching 2D images in 3D You can convert normal 2D images into 3D images. 1 Press 3D . 2 Press c / d to select “2D s 3D”, and then press ? . 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. NOTE • The confirmation message to select either 3D or 2D mod...
73 3D setup E Basic operation Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set. 3D auto change This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected. Item Mode 1 3D mode is selected automa...
74 Troubleshooting – 3D Images Problem Possible solution • 3D images are not displayed. • Is “3D auto change” set to “Off”? Press 3D to switch to 3D mode. • If “3D auto change” is set to “Mode 1” or “Mode 2” but no 3D images are displayed, check the display format of the content being viewed. Some 3...
75 Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected?• Check if you pressed < on the TV. • When the power switch does not work, remove the power plug and insert it again, and press < on the TV after waiting more than five seconds. • The TV cannot be operated. ...
76 Reset If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Reset”. 2 If you have already set the password, enter it here. 3 Press c / d to se...
77 Getting information Information Message list (DTV only) When new software is detected, you can confirm the update information and download the software from “Message list”. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Message list”. NOTE • When the TV succeeds at downloading ...
78 Appendix Information on the software licence for this product Software licence You can read the software licences in this menu. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of various...
79 Trademarks TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI...
80 Specifications Item LC-60LE640X Resolution 1,920 x 1,080 Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV function TV-standard Analogue PAL ( B/G, D/K, I), SECAM ( B/G, D/K, K/K1), NTSC:(M) Digital DVB - T Receiving channel VHF/UHF 44.25-863.25 MHz TV tuning system Auto preset 02ch/07c...
81 Appendix Removing the stand For wall mounting with the optional bracket (AN-52AG4) remove the stand. Before setting TV on the wall • Remove the connected cables (DVD, VCR, etc) from the terminals. • Before performing work, make sure to turn off the TV.• Before performing work spread cushioning ov...
82 Appendix Mounting the TV on a wall To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. AUDIO (L / R) (WIRELESS LAN) OUTPUT AUD...
83 Dimensional drawings AUDIO (L / R) (WIRELESS LAN) OUTPUT AUDIO (L/R) is shared with AV IN) 747 *1 1329 *1 1384 200 400 400 874 839 386 178 438 219 10° 106 AN-52AG4 28 145.5 73 332382.5 *1 Active area NOTE • Dimensions do not include protrusions such as screws and some parts. Appendix LC60LE640X_E...
84 CLEARING THE PASSWORD 1 Go to “HOME” >“TV Menu” > “Setup” > “View setting” > “Individual setting” > “Password”. 2 The password input screen displays. 3 Press and hold both CH r and Y + on the TV simultaneously until the message appears on the screen. NOTE • To set the password agai...
FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMITED VISIT OUR WEBSITE AT SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 FACSIMILE: 09 573 0113 FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBS...
Sharp Manuals
-
Sharp LC-60LE757U
User Manual
-
Sharp LC-70LE857U
User Manual
-
Sharp LC-80LE857U
User Manual
-
Sharp LC-80LE857U
Manual
-
Sharp LC-80LE844U
User Manual
-
Sharp LC-60SQ15U
User Manual
-
Sharp LC-60EQ10U
User Manual
-
Sharp LC-70LE734U
Manual
-
Sharp LC-60LE847U
User Manual
-
Sharp HT-SL75
Manual
-
Sharp LC-50LE650U
User Manual
-
Sharp LC-50LE650U
Manual
-
Sharp LC-52LE640U
User Manual
-
Sharp LC-70LE632U
User Manual
-
Sharp LC-70LE632U
Manual
-
Sharp LC-60LE452U
User Manual
-
Sharp LC-60LE660U
User Manual
-
Sharp LC-60LE660U
Manual
-
Sharp LC-60LE600U
User Manual
-
Sharp LC-60LE600U
Manual