Sharp LC-50LU651E - Manuals

Introduction Remote control unit 3 1 2 34 5 6 7 23 22 1918 20 17 16 21 8 13 15 9 10 12 14 11 1 NET (Page 37) Access “AQUOS NET+” mode. 2 Alphanumeric buttons 0 _ 9 Set the channel. Enter desired numbers. Set the page in teletext mode.• When the five Nordic countries (Sweden, Norway, Finland, Denmark...

TV (Front view) TV (Side and rear view) Illumination led* Introduction WARNING • Excessive sound pressure from earphones and headphones can cause hearing loss.• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels. Power button Menu button In...

Inserting the stand  Insert the stand into the openings on the bottomof the TV (Hold the stand so it will not drop from the edge of the base area).  Insert and tighten the four screws into the fourholes on the rear of the TV. NOTE • To detach the stand unit, perform the above steps in reverse or...

Preparation Inserting the batteries Before using the TV for the first time, insert the two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open battery cover. 2 Insert two supplied ...

Quick guide 1 2 3 Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. n Connect an antenna cable to the antenna terminal (Page 8). o If necessary, insert a CA card into...

Quick guide Before turning on the power In order to receive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of the TV.The CI Module and the CA Card are not supplied accessories. They are usually available from your dealers. Inserting the CA...

Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. 1 Press a on the TV. • The initial auto installation wizard appears.• The auto installation can als...

NOTE • The value of Frequency and Network ID should be set to the value specified by the cable provider. Press J to continue. If you have not selected a DVB-S antenna in the antenna selection, continue with Settings for all types of reception on page 13. Select the satellite system. Specify how you ...

Reception of a single satellite via a connected LNC (LNB). 1 Select satellite. Press J to continue. 2 Select Dual Band (low/high) or Single Band. Here you specify if you use a Dual Band (Universal) LBN or Single LBN. Press J to continue. 3 Specify here the oscillator frequency for your LNB. Normally...

Quick guide 1 Select satellite. Press J to continue. 2 Specify here the oscillator frequency for your LNB. If your set is connected to a single-cable system without external voltage supply, you can connect the antenna supply (13V or 18V / max. 450mA) with 13V or 18V. Continue with Setting options fo...

Quick guide If you install a DVB-T/T2/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. In normal TV mode, without other displays, a DVB-T station is received and selected. 1 Select Setu...

What is the menu? • The MENU view is the central overview page for all of your TV's operating modes. • The list of options on the bottom of MENU view gives you acces to TV, Video, Audio/Radio, Photo and AQUOS NET+.• By means of Extras and Setup you have access to more functions and you can configure...

You will find your favourites on the top of the MENU screen.You can create favourites in the operating modes of the TV set. In this way you get your preferred stations on a single overview page.After an initial installation, TV stations will already be automatically created as favourites independent...

Watching TV Selecting audio language E DTV/CADTV/SAT mode: Each time you press 2 the audio language switches between audio sources available. NOTE • Selectable languages vary depending on the received broadcasts. E ATV mode: Each time you press 2 , the mode switches as shown in the following tables....

EPG operation E Display/Close the EPG screen Press EPG button. Switch EPG on/off. • The first time you press EPG, a wizard will start that guides you through the necessary presettings. In the EPG wizard you decide for which station EPG data should be collected and displayed. We recommend to select o...

Other EPG functions E Calling additional information about the programmes 1 Press ▲ / ▼ / ◄ / ► to select the programmes. 2 Press “ p . If there is more information on the selected programme, it will be indicated here. View: Watch selected programme. The menu item is only available when the selected...

Buttons for standard teletext operations Buttons Description P r / s Increase or decrease the page number. Colour (R/G/Y/B) Page selection: Red: Back to the previously viewed page. Green : On to next page. Yellow: To next topic. Blue: To next range of topics. The coloured bars (for TOP) or the colou...

Basic adjustment TV set adjustments 1 Press MENU. 2 Select Setup → Picture, the next screen appears: 3 Select the picture adjustment you want to adjust: ● 3D You can enjoy 3D-supported images on the TV when you wear 3D glasses (AN-3DG20-B or AN-3DG35), sold separately.See more details on page 54. ● ...

Basic adjustment ● more... ● Headphone volume Adjust the headphone volume. ● Auto volume Reduces volume differences (for advertisements that are too loud) ● AV output signal Allows you to indicate which sound is output via the AV socket for dual sound programs: Sound1 (e.g. main language), sound 2 (...

Basic adjustment The next screen will appear: The software version that is currently installed is displayed. 6 Press V button to proceed. The TV searches for a new software file on the USB stick. If a new software version is available after the search, a message appears: New software Vx.xx 7 Press V...

Multimedia / Network settings 1 Press MENU. 2 Select Setup → Multimedia/Network, the next screen appears: 3 Select the option you want to adjust: ● Network settings With this option you can make settings to your network adapters and the various types of media. ● Networking The network wizard starts ...

Basic adjustment ● AV standard Allows you to set the AV standard of the connected device to AV or AVS.Normally you leave the setting to Automatic . If the standard of the connected device is not detected automatically, you can select the correct standard. NOTE • Ask your dealer or consult the operat...

Transmitted audio signal: 0RQR Mono audio transmission analogue Dual channel sound transmission (Sound1 /Sound2) analogue Dual channel sound transmission (Sound1 /Sound2) digital Stereo sound transmission analogue Stereo sound transmission (HEAAC) Stereo sound transmission digital (PCM) Dolby digita...

For selecting the input type of external equipment. • If no (colour) image is displayed, try changing to another signal type. • Check the operations manual of the external equipment for the signal type. Connect a USB or hard disk device to the TV as shown below. • Depending on the USB device, the TV...

TV/List function This function contains settings and additional options.The function list can be opened directly in TV mode or via the station list. Via station list: 1 Press OK on R/C. 2 Select station and press OK. 3 Press ▲ . The next screen appears: 4 Select the station you want to adjust throug...

TV menu options Video function Press MENU button on the R/C and select Video , to access the video files. Video mode Buttons Description G/J (short) Jump backwards/forward. H button When playing videos from Media Home : Stop playback and return to the media browser. From time-shifted television: tim...

1 Press MENU button on the R/C, select Audio/ Radio on the menu and press OK . 2 Pressing ◄ / ► buttons select DVB radio and press OK. Buttons Description H button End reproduction and return to the music selection. F button Play / Pause the reproduction. I (short) button Play / Stops the reproducti...

Photo mode USB / HOME MEDIA device compatibility NOTE • Progressive format jpeg files are not supported. • Music files in USB 1.1 devices may not be played properly. • Operation using USB hubs is not guaranteed. • The external hard disc with capacity exceeding 1TB cannot be detected correctly. • Cab...

AQUOS NET+ option allows you to access to AQUOS NET+ feature and Internet browser. For this option it is necessary that the TV set is connected to Internet (See page 47). 1 Press @ button, select AQUOS NET+ and press OK . The next screen appears: 2 Press > to exit. AQUOS NET+ is the feature that ...

TV menu options Apps can be re-arranged by the user: 1 Move the cursor to the application that shall be moved. 2 Use Yellow color key to enter arrange-mode. 3 Move selected service to the desired position and press the yellow color key again to confi rm the new position.To dismiss an application from...

Extras option contains additional functions and settings: ● Timer In this option you can find your saved Timer Instructions. ● Timer Instructions All programmed recordings, programmed reminders and copies are listed in this screen.Also it is possible to programme new recordings. • Create newly Creat...

Here you can find all settings and adaptabilies of the TV set. ● Picture Allows you to adjust the settings according to the representation of the picture signal on the TV.See page 21 for more information. ● Sound Allows you to find the settings for sound playback.The sub-items of the menu depend on ...

Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections.• Firmly connect a cable to a terminal or terminals.• Carefully read the operation manual of each external device for possible connection types. This also helps you get the ...

Connecting external devices The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. Analogue/digital conversion is no longer n...

Connecting external devices NOTE • In cases when the decoder needs to receive a signal from the TV, make sure you select the appropriate input terminal to which the decoder is connected in “AV selection” (Page 17). SCART connection Example of connectable devices ● VCR ● Decoder ● DVD player/recorder...

HDMI devices Controlling HDMI devices using HDMI CEC E What is HDMI CEC? Using the HDMI CEC protocol, you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE • HDMI CEC does not work while using USB...

HDMI (DVI) Connection HDMI 1, 2, 3 or 4 PC connection Connecting a PC Analogue Connection VGA cable You can select the picture size. 1 Press MENU on the remote control. 2 Select Setup → Picture → Picture format , then press OK . 3 Press ◄ / ► key to select the desired item, then press OK. NOTE • You...

Resolution Horizontal Frequency Vertical Frequency VGA 640 g 480 31,5 kHz 60 Hz SVGA 800 g 600 37,9 kHz 60 Hz XGA 1.024 g 768 48,4 kHz 60 Hz WXGA 1.360 g 768 47,7 kHz 60 Hz SXGA 1.280 g 1.024 64,0 kHz 60 Hz SXGA+ 1.400 g 1.050 65,3 kHz 60 Hz UXGA 1.600 g 1.200 75,0 kHz 60 Hz 1080p 1.920 g 1.080 67,5...

Press J to continue the installation. Choose between Wired or Wireless connection. NOTE • If you choose a wired connection to the router, you need an ETHERNET cable (not included, commercially available). • If you do not have a broadband internet connection, consult the store where you purchased you...

Select V on the screen during playback to fast forward. By selecting V repeatedly, allows you to increase the fast forwards speed. Select on the screen and press OK button to restore the normal speed.By selecting L on the screen the recording fast forwards in intervals of two minutes. Select S on th...

USB REC function ● ● Recording subtitles Select here whether subtitles are to be recorded for DVB stations. With USB REC button, the recording starts immediately at the press of a button. You only need to specify the recording time. 1 Press USB REC button. The Recording duration screen is called. ● ...

1 Press F button to switch to freeze picture. 2 Press F button again to continue playback. You can delete sections of a recording from the current position within the film to the beginning or to the end. 1 During the archive playback press F button at the point from which the archive recording is to...

● View Start or continue replaying the selected archive entry. ● Detailed info Show detailed information on the marked archive entry. ● Sorting Sort archive entries in alphabetical order or according to recording date (newest first). ● Rename Change title or archive entry. ● Delete Delete archive en...

Enjoying 3D image viewing Viewing 3D images 1 Select the 3D source (HDMI). 2 Press 3D button on remote control. NOTE • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. The image signal may contain a 3D identification ...

You can convert normal 2D images into 3D images (3D effect). 1 Press 3D button on remote control. 2 Press a/b to select "2D->3D" → " on" , and then press ; . 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. Watching 2D images in 3D Enjoying 3D image viewing Whe...

Enjoying 3D image viewing Display format for 3D and 2D images Image for input signals Selectable mode Description 3D mode (using the 3D glasses) 2D → 3D • Converts normal 2D images into 3D images. Side by Side • Creates 3D images from 3D images displayed side by side. The image is split into a left ...

Appendix Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Software developed by SHARP and/or third part The copyrights for the...

Appendix Specifications 59 Item 39” LCD COLOUR TV, Models: LC-39LE650E/RU/V LC-39LE651E/K/RU/VLC-39LE652E/RU/VLC-39LE654E/RU/VLC-39LU651ELC-39LM652E/VLC-39LK652ELC-39LX652E 50” LCD COLOUR TV, Models: LC-50LE650E/RU/V LC-50LE651E/K/RU/VLC-50LE652E/RU/VLC-50LE654E/RU/VLC-50LU651ELC-50LM652E/VLC-50LK65...

A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper...

LCD TELEVIZOR U BOJILCD TELEVIZOR U BOJI BARVNI LCD TELEVIZOR TELEWIZOR KOLOROWY LCD LCD SZÍNESTELEVÍZIÓ TELEVIZOR S BAREVNOU LCD OBRAZOVKOU TELEVÍZOR S FAREBNOU LCD OBRAZOVKOU КОЛЬОРОВИЙ ТЕЛЕВІЗОР З РІДКОКРИСТАЛІЧНИМ ДИСПЛЕЄМ VÄRVILINE LCD-TELER ŠĶIDRO KRISTĀLU EKRĀNA (LCD) KRĀSU TELEVIZORS SPALVIN...