Sharp LC-40LE730E - Manuals

TV (Front view) TV (Side and rear view) Illumination led* Introduction WARNING • Excessive sound pressure from earphones and headphones can cause hearing loss.• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels. Power button Menu button In...

Inserting the stand  Insert the stand into the openings on the bottom of the TV (Hold the stand so it will not drop from the edge of the base area).  Insert and tighten the four screws into the four holes on the rear of the TV. NOTE • To detach the stand unit, perform the above steps in reverse ...

Preparation Inserting the batteries Before using the TV for the first time, insert the two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open battery cover. 2 Insert two supplied ...

Quick guide 1 2 3 Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection.  Connect an antenna cable to the antenna terminal (Page 8).  If necessary, insert a CA card into...

Quick guide Before turning on the power In order to receive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of the TV.The CI Module and the CA Card are not supplied accessories. They are usually available from your dealers. Inserting the CA...

Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. 1 Press a on the TV. • The initial auto installation wizard appears. 2 Setting the OSD language. Pr...

Watching TV Selecting audio language E DTV/CADTV/SAT mode: Each time you press 2 the audio language switches between audio sources available. NOTE • The audio mode screen disappears in three seconds. • Selectable items vary depending on the received broadcasts. E ATV mode: Each time you press 2 , th...

E Select a program 1 Select the time span -Press c / d to select the time span you want to search, p ress OK. • Continue to press d to display programs in the next time span. 2 Select the desired program -Press a / b to select the desired program, p ress OK . • If a or b are displayed on the left of...

Buttons for teletext operations Buttons Description P r / s Increase or decrease the page number. Colour (R/G/Y/B) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (R/G/Y/B) on the remote control unit. 0–9 Directly s...

Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections.• Firmly connect a cable to a terminal or terminals.• Carefully read the operation manual of each external device for possible connection types. This also helps you get the ...

Connecting external devices The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. Analogue/digital conversion is no longer n...

Connecting external devices NOTE • In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder is connected in “Source List” (Page 10). SCART connection Example of connectable devices ● VCR ● Decoder ● DVD player/recorder S...

HDMI (DVI) Connection ø 3,5 mm stereo mini jack cable HDMI 1, 2, 3 or 4 HDMI-certified cable DVI/HDMI Cable PC connection Connecting a PC Analogue Connection ø 3,5 mm stereo mini jack cable VGA cable You can select the picture size. 1 Press MENU on the remote control,then press OK . 2 Press ▼ key to...

Resolution Horizontal Frequency Vertical Frequency VGA 640 g 480 31,5 kHz 60 Hz VGA 720 g 400 31,47 kHz 70 Hz SVGA 800 g 600 37,9 kHz 60 Hz XGA 1.024 g 768 48,4 kHz 60 Hz WXGA 1.360 g 768 47,7 kHz 60 Hz SXGA 1.280 g 1.024 64,0 kHz 60 Hz SXGA+ 1.400 g 1.050 65,3 kHz 60 Hz UXGA 1.600 g 1.200 75,0 kHz ...

AV A A F USB REC V S U T NOTE • "MENU" options differ in the selected input modes, but the operating procedures are the same. • The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. • Items in darke...

Basic adjustment Picture settings When the Picture Mode is set to “User” , the picture can be adjusted according to your preferences. See the following setting table. Adjustments options Selected setting ◄ Button ► Button Brightness Brightness goes down Brightness goes up Contrast Contrast goes down...

Audio settings When the Sound Mode is set to “User” , the sound can be adjusted according to your preferences. See the following setting table. Adjustments options Selected setting ◄ Button ► Button Balance Increase audio from the left speaker Increase audio from the right speaker Treble Reduce treb...

Time settings This adjustment allows you to set or to display the following functions: Clock, Off/On Timer and Sleep Timer. ● ● Clock This function allows you to display the clock information (day / month / year / hour/ minute). The time and the date can’t be modified in this option. ● ● Off timer A...

Channel settings Channel Channel adjustments Allows to reconfigure the channels after initial auto installation has been completed. ● ● Auto tuning This function allows you to select the country and automatically adjusts the channels for digital, cable, satellite (Only LE732 model series) or analogu...

Searching for satellite broadcasts (Only for LE732 model series) Basic adjustment ● SADTV Auto tuning Allows you to tune satellite services. 1 Press MENU on the remote control. With ◄ / ► keys select Channel , then select   Auto Tuning and press OK . 2 With ▲ / ▼ / ◄ / ► keys select Tuner type → SAD...

● Language Language Allows you to select the screens language and the audio language. ● OSD Language Press a / b/c/d to select the "Menu" language, then press OK . ● Audio Languages Press a / b to select the audio language. ● Subtitle and Teletext Settings Allows you to activate/deactivate t...

You can display the channel information that you are watching at this moment by pressing p on the remote control unit. Information that appears on the screen:  Program number  Program name  Age classification  Audio  Available Services: Radio / Teletext / Subtitles / Encripted  Information ab...

For selecting the input type of external equipment. • If no (colour) image is displayed, try changing to another signal type. • Check the operations manual of the external equipment for the signal type. Connect an USB device to the TV as shown below. • Depending on the USB device, the TV may not be ...

Buttons for full screen display operation Viewing pictures on full screen Buttons Description ▲ / ▼ Cursor Go to the previous/next photo in the same directory. 6 button Go back to the previous screen. Blue button Zoom: ▲ / ▼ / ◄ / ► allow to move through the pictures when zoom is activated. Yellow b...

HDMI devices Controlling HDMI devices using HDMI CEC E What is HDMI CEC? Using the HDMI CEC protocol, you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE • HDMI CEC does not work while using USB...

HDMI devices Connecting a player/recorder only Player/Recorder  HDMI-certified cable (commercially available) HDMI CEC (Consumer Electronics Control) menu Go to “Menu” > “Settings” > "Input Settings" > “HDMI CEC” and select the menu you want to set. Set to “On” to enable HDMI CEC f...

Connected TV What is Connected TV? Internet setup Connected TV set to play easily digital media contents coming from the Network (Internet or Home). Connected TV offers up to two different modes: E Internet services support (BBC iPlayer (Only LE731 for UK), YouTube, and HbbTV). E Media Streaming sup...

Connected TV The illustrations on this page are for explanation purposes. They are subject to change without notice. E Display the start page Press NET . NOTE • When connect TV to the Internet, a message which requests a software update may display in some cases. E Select a service Press ▲ / ▼ / ◄ /...

USB REC function USB REC function allows you to record a TV programme and watch it later. Also allows you to temporize one or more recording and they will be available for a later on view. These recordings will not be lost when the TV is turned off. USB REC requires an external USB 2.0 memory, alway...

● ● Recordings and timings 1. The timings will be stored in the USB REC Programmed recording list in the USB REC menu, pending to be executed. 2. All the fi nished recordings are available on the “ USB REC Recorded list ” in the USB REC menu. Select the fi le you want to view and press OK • Press OK...

Enjoying 3D image viewing Viewing 3D images 1 Select the 3D source (HDMI). 2 Press "3D" button on Remote Control. NOTE • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D image signal that can be...

Enjoying 3D image viewing Configuring the TV settings to enhance 3D image viewing You can adjust the brightness of the TV for 3D image viewing. 1 Press 3D button while you are viewing 3D image. 2 Press b to select 3D Brightness and press OK. 3 To adjust de brightness press a/b to choose between the ...

Enjoying 3D image viewing Troubleshooting - 3D Images Problem Possible solution • 3D images are not displayed. • Is “3D auto change” set to “No”? Press 3D to switch to 3D mode. • If “3D auto change” is set to “Yes” but no 3D images are displayed, check the display format of the content being viewed....

Appendix Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Software developed by SHARP and/or third part The copyrights for the...

Appendix Troubleshooting Problem Possible Solution • No power. • Check if you pressed TV a on the remote control unit. If the indicator on the TV lights up red, press TV a . • Is the AC cord disconnected?• Check if you pressed a on the TV. • The TV cannot be operated. • External influences such as l...

Appendix Specifications Item 40” LCD COLOUR TV, Models: LC-40LE730E, LC-40LE731E, LC-40LE732E 46” LCD COLOUR TV, Models: LC-46LE730E, LC-46LE731E, LC-46LE732E LCD Panel 40” BLACK TFT LCD LED TV 46” BLACK TFT LCD LED TV Resolution 6.220.800 dots (1.920 x 1.080 pixels) Video Colour System PAL/SECAM/NT...

Appendix EU Energy Label for Televisions On 30 November, 2010 the European Commission adopted the Commission Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of televisions. The Regulation entered into force on 20 December 2010 and applies in all Member States. Manufacturers an...

Sharp LCD-TV with an EU Eco-label This product has of fi cially been awarded the Eco-label of the European Union, “The Flower” (for details see EU Commission Decision 2009/300/EC - OJ L 82/3 dated 28.3.2009). Sharp is the fi rst company to achieve this Eco-label for TVs thus demonstrating its commit...

A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper...

TINS-F204WJZZ LC-40LE730E LC-46LE730E LC-40LE731E LC-46LE731ELC-40LE732E LC-46LE732E LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIÓN EN COLOR LCD TELEVISOR DE CRISTAL LÍQUIDO Printed in PolandGedruc...