Page 2 - English; Contents; Connection to a Television Distribution System (Cable TV etc.)
English - 1 - Contents Features ............................................................................................ 2Dear SHARP customer ...................................................................... 2Introduction ........................................................................
Page 3 - Features; Important safety precautions; Introduction; I F Y O U H AV E A N Y D O U B T, C O N S U LT A Q U A L I F I E D
English - 2 - Features Remote controlled colour LCD TV. • Fully integrated Terrestrial digital TV (DVB-T - MPEG2) • HDMI connectors for digital video and audio. This connection is also • designed to accept high definition signals. USB input. • Programme recording • Programme timeshifting • 1000 prog...
Page 4 - floor surface can cause the product to fall from the cart.; Precautions when transporting the TV; hands—one hand on each side of the TV.; WARNING
English - 3 - Important safety precautions Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid • cleaners or aerosol cleaners.Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not...
Page 5 - Safety Precautions; Read the following recommended safety precautions carefully; Note
English - 4 - Safety Precautions Read the following recommended safety precautions carefully for your safety. Power Source The TV set should be operated only from a 220-240V AC, 50Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a p...
Page 6 - Package Contents; lengths shall be smaller than 3m.; Environmental Information; Repair Information
English - 5 - The “HD TV 1080p” Logo is a trademark of EICTA. • The DVB logo is the registered trademark of the • Digital Video Broadcasting—DVB—project. Electrical device not in the hands of children Never let children use any electrical device unsupervised. Children cannot always recognise possibl...
Page 7 - Remote Control Buttons
English - 6 - Remote Control Buttons Standby 1. Image size / Zooms videos (in Media Browser video mode) 2. Sleep Timer 3. Mono / Stereo - Dual I-II / Currrent Language (*) (in DVB 4. channels)Favourite Mode Selection (in DVB channels) 5. Numeric buttons 6. Electronic programme guide (in DVB channels...
Page 8 - LCD TV and Operating Buttons; Press; Viewing the Connections - Back Connectors
English - 7 - LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu. Viewing the Connections - Back Connectors SP...
Page 9 - Viewing the Connections - Side Connectors; information, see “Conditional Access” section.; Power Connection; IMPORTANT; Aerial Connection; Using USB Inputs; files stored in a USB drive or record programmes.; SIDE VIEW USB MEMORY
English - 8 - Viewing the Connections - Side Connectors CI Slot 1. is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section. USB Inputs 2. . Note that programme recording feature is available via thes...
Page 10 - that you first format the disk using your TV’s “Format Disk” option.; Connecting to a DVD Player via HDMI; Connecting to a DVD Player via Component
English - 9 - Quickly plugging and unplugging USB devices, is a very hazardous • operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device itself. Do not pull out USB module while playing or recording a ...
Page 11 - Input Selection; “SOURCE”; Basic Operations; You can operate your TV using both the remote control and onset; Connecting the LCD TV to a PC; For displaying your computer’s screen image on your LCD TV, you; Using Side AV Connectors; Remote Control Handset
English - 10 - Note : If you switch on your TV via CH / CH buttons on the remote control or on the TV set, the programme that you were watching last will be reselected. By either method the TV will switch on. To Switch the TV to Standby To s w i t c h t h e T V t o l o w p o w e r s t a n d b y p r ...
Page 12 - Programme Selection (Previous or Next Programme); Views filtering options.; Recording via EPG Screen; Programme Options; IMPORTANT: To record a programme, you should first connect a USB
English - 11 - Programme Selection (Previous or Next Programme) Press “CH • ” button to select the previous programme. Press “CH • ” button to select the next programme. Programme Selection (Direct Access) Press numeric buttons on the remote control to select programmes • between 0 and 9. The TV wil...
Page 13 - events at the same time interval.; First Time Installation; IMPORTANT: Ensure that the aerial is connected before switching
English - 12 - To cancel an already set reminder, highlight that programme and press the OK button. Then select “ Delete Timer ” option. The timer will be cancelled. Note: It is not possible to record or set timer for two or more individual events at the same time interval. First Time Installation I...
Page 14 - Installation; Automatic Channel Scan (Retune) Menu Operation; After auto channel scan type is set and selected and confirmed,; Manual Tuning; Digital Manual Search; buttons. Analogue fine tune screen will be displayed.; Managing Stations: Channel List
English - 13 - Installation Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button. Press OK button and the following menu screen will be displayed. Select Automatic Channel Scan (Retune) by using “ ”/“ ” button and press OK button. Automatic Channel Scan (Retun...
Page 15 - Managing Stations: Favourites; “INFO”
English - 14 - Operating the Channel List Press “ • ” or “ ” button to select the channel that will be processed. Press “ ” or “ ” button to select a function on Channel List menu.Use CH • /CH buttons to move page up or down. Press • BLUE button to view filtering options. Press • “MENU” button to ex...
Page 16 - Media Playback Using Media Browser; If the USB stick is not recognized after power off/on or First Time; Viewing Videos via USB
English - 15 - Media Playback Using Media Browser If the USB stick is not recognized after power off/on or First Time Installation, first, plug the USB device out and power off/on the TV set. Plug the USB device in again. To display Media Browser window, press either “ MENU ” button on the remote co...
Page 17 - Recordings Library; Timeshift Recording; Instant Recording
English - 16 - Up/Down: Navigate. Play ( button) : Plays all media files starting with the selected one. Stop ( button) : Stops playback. Pause ( button) : Pauses the selected playback. RED : Sorts files by Title,Artist or Album. Loop/Shuffle (GREEN button) : Press once to disable Loop. Press again ...
Page 18 - Watching Recorded Programmes; Play from offset: Specifies a playing point.; Changing Image Size: Picture Formats; Auto; aspect ratio) to fill the wide TV screen.; Subtitle
English - 17 - Press (STOP) button to cancel instant recording. The following OSD will be displayed: Select Yes by using “ ” or “ ” / OK buttons to cancel instant recording. Note: Switching to a different broadcast or source; and viewing Media Browser are not available during the recording. Watching...
Page 19 - Configuring Picture Settings; Operating Picture Settings Menu Items; Cool; PC Picture Settings
English - 18 - 4:3 Use to view a normal picture (4:3 aspect ratio) as this is its original size. Panoramic This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. The top and bottom of the picture are slightly cu...
Page 20 - Configuring Sound Settings; button and select the first icon by using “; Operating Sound Settings Menu Items; Configuring Your TV’s Settings; Operating Settings Menu Items; Using a Conditional Access Module; IMPORTANT: Insert or remove the CI module only when the TV is
English - 19 - Configuring Sound Settings Sound settings can be configured according to your personal preferences. Press “MENU” button and select the first icon by using “ ” or “ ” button. Press OK button to view Sound Settings menu. Operating Sound Settings Menu Items Press “ • ” or “ ” button to h...
Page 21 - Configuring Language Preferences; button and select the fifth icon by using “; Preferred; when the first options are not available.; Parental Control; Parental Settings Menu Operation; : Defines a new PIN number. Use numeric buttons to enter a
English - 20 - Configuring Language Preferences You can operate the TV’s language settings using this menu. Press “MENU” button and select the fifth icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Language and press OK to continue: U s e “ ”...
Page 22 - Timers; “MENU”; Setting Sleep Timer; When finished with editing, press; Deleting a Timer; Recording Configuration; • Also, if your USB disk malfunctions, you can try formatting the; Configuring Date/Time Settings; in the Settings menu to configure Date/Time settings.
English - 21 - Timers To view Timers menu, press “MENU” button and select Channel List icon by using “ ” or “ ” button. Press OK button to view Channel List menu. Use “ ” or “ ” button to highlight Timers and press OK to continue: Setting Sleep Timer This setting is used for setting the TV to turn o...
Page 23 - Configuring Source Settings; to the disabled source options when; Configuring Other Settings; To view general configuration preferences, select; Operation; Other Features; are two alternatives the first one is pressing the “
English - 22 - Configuring Source Settings You can enables or disable selected source options. The TV will not switch to the disabled source options when “SOURCE” button is pressed. Select • Sources in the Settings menu and press OK button. Press“ • ” or “ ” buttons to select a source. Use “ • ” or ...
Page 24 - Teletext; Tips; displaying a persistent image.LCD TVs’ image persistence may
English - 23 - Teletext The teletext system transmits information such as news, sports and weather on your TV. Note that if the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted. Teletext function buttons are listed below:...
Page 25 - Appendix A: PC Input Typical Display Modes; The display has a maximum resolution of 1360 x 768. The following; Appendix B: AV and HDMI Signal Compatibility
English - 24 - Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch y...
Page 26 - None
English - 25 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i þ 480p þ 576i þ 576p þ 720p þ þ 1080i þ þ 1080p þ þ þ þ þ Appendix D...
Page 27 - Appendix E: Software Upgrade; ) Software upgrade search via user interface; • In; Products; Notice
English - 26 - Appendix E: Software Upgrade • Your TV is capable of finding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update...
Page 28 - Specifications; On Screen Display
English - 27 - Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile Frequency range: 474-850 MHz for UK models 170-862 MHz for EU models Transmission standard: DVB-T. MPEG-2 Demodulation: ...
Page 29 - Dimensional Drawings
Page 30 - End of life disposal
Page 31 - Detachable Stand Uninstallation Method; and remove the foot assembly from the panel.
English - 30 - Detachable Stand Uninstallation Method To install the TV on the wall, first of all, foot assembly should be removed. Unscrew the 4 screws that attach the foot assembly to the panel and remove the foot assembly from the panel.
Page 32 - Screw Dimensions; Model
English - 31 - Screw Dimensions L D Model D L Item Number VESA Installation of the Screw LC-19LE510E LC-19LE510K Ø4 30 4 75 x 75 (W x H) To the wall M4 18 4 To the product LC-22LE510E LC-22LE510K LC-22DV510E LC-22DV510K Ø4 30 4 75 x 75 (W x H) To the wall M4 18 4 To the product LC-24LE510E LC-24LE51...