Sharp JX-9500H- Manuals

Page 4 - A. Xprint – Generalities; Backup Server

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 4/89 A. Xprint – Generalities A.1 Backup Server Xprint provides internally two features ensuring a basic high availability: the device group for the printing and the replicated database mechanism for the product management. The device group is an ...

Page 8 - How can I print a start sheet in landscape mode ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 8/89 "ISO-100:ECMA-94" language except the 134 and 174 (replaced via map table char_map). So, depending on the used Pcl, choose your reference language. If this line is the last of the capability, replace %e by %; 4. Register the Pcl modif...

Page 9 - A.11 How to change the name of a host defined within an Xprint domain ?; Please refer to the reference guide for the host name aliasing.

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 9/89 4) - If this Pcl is non PJL one : o Associate the sequences of the begin of job to the "boprt" capability. If you want the sequences to be sent before each document, associate it to "bodoc" capability. o Associate the sequence...

Page 10 - A.12 How to configure correctly the LANG and NLSPATH variables?; and NLSPATH variables.; A.14 How to suppress restrictions about vertical motion values?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 10/89 A.12 How to configure correctly the LANG and NLSPATH variables? If you receive the following error: “The message catalogue can't be opened. Please, verify your LANG and NLSPATH variables. " or "The message or message catalogue seems ...

Page 11 - A.15 How to take the Header & Trailer pages from special hopper ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 11/89 # = number of 1/48 inch. In the formula (lpi=\e&l%{48}%p1%/%dC,) the result of 48 divided by p1 has to be an integer. This leads to restrictions in the values for the lpi (1,2,3,4,6,8,12,16,24,48) A workaround is to use a conditional str...

Page 17 - B. List of supported printers

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 17/89 B. List of supported printers Please have a look at the section 7.1 of the reference manual or at the section “J.1 Which PCL do we recommend according to a printer ?” of this F.A.Q.

Page 18 - C. Installation UNIX

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 18/89 C. Installation UNIX Please read the Xprint 8 release nopte from section 8.4.4 to 8.4.10.

Page 19 - D. Installation Windows; Please have a look at the section 7.3 of the Xprint 8 release note

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 19/89 D. Installation Windows Please have a look at the section 7.3 of the Xprint 8 release note

Page 20 - E. Starting and stopping; How can I reduce the delay between a stop-start of Xprint ?; How must the Xprint Pot-Masters be rebooted ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 20/89 E. Starting and stopping E.1 How can I reduce the delay between a stop-start of Xprint ? On a Xprint-Net configuration the port Xprint_db stays for a while in TIME-WAIT after the processes are already gone. During this period Xprint can not ...

Page 21 - F. Product Licensing; What are the Demo license conditions?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 21/89 F. Product Licensing F.1 How to use xpkey -i with codes displayed on 2 lines, in the license file ? For instance, to register the following key: Mq GB Fu 5Z tD gI rD CW 1D wr CX fI Sq Bb: LJ f4 W6 LL MM:: ========== # File : </C=/Program ...

Page 22 - How can I produce such keys?; Feature; OSL

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 22/89 G. License generation tool (DMG) G.1 What kind of keys can be generated with the DMG license generation tool? The license key generator has been designed to generate keys for two purposes: Keys that control the number of sessions within the ...

Page 23 - the name of this file is very important !; Where is the DMG key file located?; guiKey; Where is the event collector key file located?; nobody

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 23/89 Program output: Interactive Mode Vendor Name: OSL License ID : Event_Collector Number: 1 The program creates the key within a file (guiKey file). This file is created in the current directory. Afterwards, this file has to be sent to the cust...

Page 24 - H. Printer connection; How to define a printer connected to an Axis box ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 24/89 H. Printer connection H.1 How to define a printer connected to an Axis box ? Printing to a printer connected to an Axis box is possible by using the axis fast filter. This filter allows not only to submit print jobs but also to have a follow...

Page 25 - How to configure the ports of an Axis box ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 25/89 Restrictions : When a printer exception occurs while printing a job, the printer will be seen as being in error during the whole job printing. This is due to a wrong behaviour of the Axis box which sends an error message when a problem occur...

Page 26 - Display on PJL printers is not reset

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 26/89 I. Printing I.1 Display on PJL printers is not reset On a device configured in Xprint with the pcl object PJL-PCL5e, the display of the printer is not reset to "ready" after printout, but displays the job name, until next job arrives...

Page 34 - How to define the new forms for the format LETTER ?; Jobs sent to printer with bsd fast filter remain ACTIVE forever.

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 34/89 debug=$1 jobid=$2 comment=$3 files=$4 echo " `date` fax : jobid $jobid, comment $comment , files $files " >> $DBGFILE if [ -z "$comment" ] then echo " job ${jobid} : NO phone number see comment " >> $DBGFI...

Page 35 - J. Print job processing; Which PCL do we recommend according to a printer ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 35/89 J. Print job processing J.1 Which PCL do we recommend according to a printer ? [Brother] Brother HL-10DV PJL-PLC5e Brother HL-10h PJL-PCL5e Brother HL-10V PJL-PLC5e Brother HL-1260 PJL-PCL5e Brother HL-4 HP-LASERJET Brother HL-4V PJL-PLC5e B...

Page 51 - K. BSD protocol based interoperability

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 51/89 K. BSD protocol based interoperability K.1 How to send a job from BS2000 by using RSO (in raw mode) to a Xprint NT printer with application of filter ? This is a possible solution : Use the "TCP/IP" print server on Windows NT and def...

Page 52 - How to define a RSO printer using the protocol LPD ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 52/89 You can check it with the "netstat –a | grep 9999" command, which returns you the list of the connections using this port. K.5 How to define a RSO printer using the protocol LPD ? Configuration of RSO printers Connecting a printer to...

Page 55 - Transparent support for a new printer by RSO

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 55/89 Configuration of RSO printers Execution example The following example summarizes the definitions of the operatin environment required to give RSO V3.0A access to a 4822 Printer that is controlled from a UNIX host. RSO V3.0A accesses the prin...

Page 56 - What is the maximum number of partner gateways in Xprint ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 56/89 control characters) to the printer, and finally conversion of this data by the printer (according to the printer language). Establishing the connection Before a dialog can commence with the printer controller, a logical connection must be es...

Page 57 - Gateway activation problem

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 57/89 L. Xprint (GIP2) protocol based interoperability (except with Dprint) L.1 Gateway activation problem • A common problem, that can prevent you to activate a gateway, is when several gateways are using the same port number, which is set by the...

Page 58 - M. Interoperability with Dprint

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 58/89 M. Interoperability with Dprint Please visit the web site of fujitsu-siemens to get the DPRINT manuals. http://www.fujitsu-siemens.com/products/software/doc_printing/bs2000osd/dprint.html

Page 59 - Missing libraries at Mercator start; Problem when starting Mercator ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 59/89 N. Graphical Administration Interface (Mercator) N.1 Missing libraries at Mercator start The start of Mercator V6 displays sometimes error messages of the form dynamic linker: mais: can't find libCstd.so.1 or libCrun.so.1 file is missing at ...

Page 63 - Deactivate the supervisor

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 63/89 Q. Diagnose Q.1 How to grant access to Xprint log files to a specific group Issue the command xpgrant. - xpgrant – without parameters, the log files & debug files are made readable/writable to any user. - xpgrant <groupid> - with t...

Page 64 - MyDBCallbacklib.log (log file of the database manager callbacks); How to get debugging for the DMG Anchor – request processor

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 64/89 Q.3 How to make the difference between Xprint & system error messages? The system errors are always preceeded by “errno”. Q.4 How to get debugging for the DMG Server The file $APACHE_HOME/logs/error_log contains all the errors encountere...

Page 65 - Start Xprint normally; How to get debugging for the DMG Relay – request distributor

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 65/89 On Unix/Linux - PROC_DBG=YES - export PROC_DBG - Start Xprint normally On Windows - Go to the properties of the “My computer” icon and click on the “Advanced” tab, there click on the button “Environment variable”. Create PROC_DBG in the syst...

Page 67 - Q.12 How to report a problem

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 67/89 - Track the processing Create the following file: /tmp/.xpexpimpdata.log using the touch command. Xpexpimpdata will write information about the processing into that file. - To get a deeper level of diagnosis information (set –x output) Creat...

Page 68 - How to get debugging information with the BSD fast filter?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 68/89 find . -name "*.dbg" -print | cpio -ocvBd > < /tmp/Xpdbg 4. Xprint configuration In /var/spool/Xprint/goodies/tools, there is a script xpdbls. Execute this script, and redirect the output in a file: /var/Xprint/goodies/tools/xp...

Page 69 - R. Installation – DMG; The DMG Server containing Apache, PHP5 and the DMG Interface

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 69/89 R. Installation – DMG R.1 What are the different architectural possibilities about the DMG components installation? The DMG components are independent and may be installed on separate machines. They are splitted over three installation packa...

Page 70 - How can I bind the DMG components?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 70/89 R.2 How can I bind the DMG components? As the DMG components can be installed on separate machine, you will need to bind them yourself. The DMG components may be considered as a chain and each component is a link of that chain. To build that...

Page 72 - What can I expect from the DMG in terms of performance?; cache size

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 72/89 S. DMG benchmark S.1 What can I expect from the DMG in terms of performance? A series of tests has been realized on several platforms in order to measure the rapidity of the DMG components. Xprint and all the DMG components were installed on...

Page 74 - T. Xprint Environment Variables

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 74/89 T. Xprint Environment Variables T.1 What are the available Xprint environment variables that can be used to tune the system ? XP_DESTIN Context: official and documented interface from Xprint 1.2A / Spool 4.1A Description: specifies a list of...

Page 75 - process

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 75/89 Description: specifies the maximum time in seconds spent on flushing data returned by a LAN printer when closing the connection. The variable was supported in the function taclan_disconnect(). As this function is no longer called in the rece...

Page 78 - Initialisation Time: Before executing; xppoll; Behaviour if unspecified: No debugging is possible for the; xppoll

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 78/89 This behaviour have been described in the Xprint V05.0A00 release note. Reference: - DBG_XPPOLL Context: Present since Xprint version 4.1 and not documented Description: The set of this environment variable will engage the debugging mechanis...

Page 82 - U. Xprint migration aspects; Uninstall the MKS Platform Components 7.x

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 82/89 U. Xprint migration aspects U.1 Are there different migration scenarios for upgrades from Xprint 5.2 to 6.0 to 7.0 to 8.0 ? No, there is no difference. The migration aspects between the version 5.2 and a higher version are detailed in the Xp...

Page 83 - V. Extended options; What are the available extended options ?; Xprint extended option name

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 83/89 V. Extended options V.1 What are the available extended options ? The table below lists all the extended options that are used for both tunning/internal purposes. Xprint extended option name Xprint object Description XP_FORCE_PRINTING JOB Us...

Page 84 - LRS

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 84/89 GUISRV_PATH LRS DMG LRS for internal use only DISTRIBUTOR_HOST LRS DMG LRS for internal use only

Page 85 - W. Useful links to get support; Sun

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 85/89 W. Useful links to get support UNIX Sun http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access Win http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access HP Packages libraries http://hpux.cs.utah.edu/hppd/ Support h...

Page 86 - How can I customize my Firefox Web browser ?; Tiltle bar and status bar customizations are possible:

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 86/89 X. Useful hints X.1 How can I search for a string in the DMG window using a Firefox Web browser ? Hit simultenaously the control key and the letter “f” (CTRL/f). This will give you the possibility to enter the text you are looking for with a...

Page 88 - Y. Limitations and restrictions; Section 10 of the Xprint release note

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 88/89 Y. Limitations and restrictions Please have a look at the following sections of the manuals: - Section 10 of the Xprint release note - Section 9 of the DMG Server release note - Sections 4.3.2 and 7.5.3 of the Xprint reference manual

Page 89 - Z. Operating systems tips; How to create, modify or delete a windows service ?

Xprint F.A.Q. Document revision 10 (16.09.2008) Page 89/89 Z. Operating systems tips Z.1 How to create, modify or delete a windows service ? To manage the windows services, you can use the command sc.exe which is available on each Windows system. The following example creates a service named 'newser...

Manuals:

User Manual Sharp JX-9500H

Summary

Sharp Manuals