Sharp DV-NC70 and DV-NC70X - Manuals

Page 2 - About This Manual; All mentions of “the Remote” refer to the remote control unit.; Icon; DVD

About This Manual • All mentions of “the Remote” refer to the remote control unit. • The following table describes the icons used in this Operation Manual. Icon Meaning Tips and Hints for easier operation Functions for DVD Functions for VIDEO CD Functions for Audio CD GENERAL INFORMATION CONNECTION ...

Page 3 - Laser Diode Properties; SAFETY INFORMATION; Power Cord Protection; Never put any heavy object on the AC power cord.

1 GB Note: This Product can be used only where the powersupply is AC 110V-240V, 50/60Hz. It cannot beused elsewhere. <Only for DV-NC70X> Note: This Product can be used only where the powersupply is AC 240V, 50Hz. It cannot be usedelsewhere. CAUTION: USE OF CONTROLS OR ADJUSTMENTS ORPERFORMANCE...

Page 4 - Do not put any foreign object on the disc tray.

GB 2 SAFETY INFORMATION Location and Handling • Do not place your Product in closed spaces or donot cover it to prevent excessive temperaturesinside the Product. • Do not place the Product in direct sunlight, or nearheat sources. • Keep the Product away from strong magneticobjects. • Do not place an...

Page 5 - Types of Discs that Can Be Played on This Product

3 GB Types of Discs that Can Be Played on This Product This Product can play back discs bearing any of the following marks: DVD See 1 DVD-R/DVD-RW* See 2 on the next page [8cm(3") disc/12cm(5") disc] VIDEO CDs • Supports up to version 2.0. [8cm(3") disc/12cm(5") disc] Audio CDs See 3...

Page 6 - Disc Function or Operation that is Not Available; Sample Icons; Title, Chapter and Tracks; Example: VIDEO CD or Audio CD; Region code indicator; Title 1

GB 4 Types of Discs that Can Be Played on This Product Disc Function or Operation that is Not Available In the cases listed below, the or indicator may appear on the TV screen, which indicatesthat the function or operation is not available. • When you intend to perform the function or operation on w...

Page 7 - Handling Precautions; If the Surface is Soiled (; Maintenance; Disc Handling and Maintenance; Disc tray

5 GB Handling Precautions • Hold the disc by the edges so the surface will not be soiled withfingerprints. ( A ) Fingerprints, dirt and scratches can cause skipping and distortion. • Do not write on the label side with a ball-point pen or other writingutensils. • Do not use record cleaning sprays, b...

Page 8 - Contents; GENERAL INFORMATION; Types of Discs that Can Be Played on; CONNECTION AND INITIAL SETTINGS; and P; VCR SETUP; Setting the COMPRESSION; WATCHING THE VCR

GB 6 Contents GENERAL INFORMATION SAFETY INFORMATION ................................ 1 Types of Discs that Can Be Played on This Product .............................................. 3 Disc Handling and Maintenance .................. 5 Features ........................................................

Page 9 - Programming the Timer with G-; System; Recording a DVD disc onto a Video cassette; WATCHING THE DVD; When connecting a TV with the; OTHER INFORMATION

7 GB Contents DPSS (Digital Program Search System) /Skip Search ............................................ 61 DPSS ................................................................ 61Skip Search ...................................................... 61 TV Programme Recording ..........................

Page 10 - Features; Common Features; Accessories; Remote control unit; Operation Manual; Disc Features and this Operation Manual; For some operations, the

GB 8 Features ■ Common Features • A DVD, AUDIO CD, VIDEO CD player and VCR all in one. • Simultaneous VCR recording and DVD playback. ■ VCR • Hi-Fi Stereo Sound, NICAM/IGR System • 380-times High Speed Rewind Function (in NTSC) • S-VHS Simple Playback • HQ (High Quality) Circuitry • Simple Recording...

Page 11 - Major Components; SEP; L R; VCR Front Panel Display

9 GB Major Components VCR Main Unit (Front) OPEN/CLOSE EJECT/STOP REW REC CH VCR/DVD SELECTOR TIMER VCR DVD PLAY STOP AV 2 IN VIDEO L(MONO)-AUDIO-R / SEP VP D VCR L R OPERATE PLAY/ × 2 18 VCR/DVD SELECTOR 62 OPERATE 18 REC 38 Clock Indicator 38 Channel Indicator 38 Tape Counter Indicator 52 PLAY/ × ...

Page 12 - DVD Front Panel Display; You can toggle between; DISPLAY

GB 10 OPEN/CLOSE EJECT/STOP REW REC CH VCR/DVD SELECTOR TIMER VCR DVD PLAY STOP AV 2 IN VIDEO L(MONO)-AUDIO-R / OPERATE PLAY/ × 2 79 Disc tray 79 OPEN/CLOSE 78 OPERATE TITLE Indicator 49 Operation status/Time Indicator TRACK Indicator CHAPTER Indicator 79 Disc operation buttons (PLAY, STOP) 95 PROGR...

Page 13 - Loading the Batteries; and

11 GB Remote (VCR Operation Buttons) • The explanations on this page use the VCR/DVD CHANGE Switch in the VCR position. Numbers in refer to the main pages in this Operation Manual where the topic is explained. Loading the Batteries 1 Open the battery coverby pulling the lid in thedirection of the ar...

Page 14 - SKIP; The explanations on this page use the

GB 12 REV FWD PLAY STOP OPEN/ CLOSE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TITLE DVD MENU DISPLAY FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN OPERATE TIMER ON/OFF EJECT SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC SLOW CH VCR DVD SKIP DPSS AUDIO OUTPUT...

Page 16 - Basic Connection; Connecting to ANTENNA IN/RF OUT; The connection method differs depending on the type of TV.; TV

GB 14 Basic Connection Caution: • Be sure to turn off the Product and equipment to be connected before connecting. • Read through the operation manual for the equipment to be connected. • Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable. • Be sure to keep the P...

Page 17 - Required cable; Jack and Plug Colours; Connecting a TV Equipped with VIDEO/AUDIO Input Jacks; cable to a monaural TV that has only one AUDIO input jack.

15 GB DVD OUT LINE OUT 2 VCR DVD/VCR ANTENNA IN RF OUT LINE IN 1 AUDIO R L VIDEO AUDIO R L VIDEO LINE OUT 1 DIGITAL AUDIO AUDIO R L S-VIDEO Y P R (C R ) P B (C B ) COMPONENT VIDEO IN AUDIO IN L R Yellow White (L) Red (R) Yellow White (L) Red (R) Required cable VIDEO/AUDIO cable (supplied) Jack and P...

Page 18 - DVD Audio Connections; Connecting a TV Equipped with S-VIDEO Input Jacks; Analogue Connection

GB 16 ANALOG INPUT L R INPUT S-VIDEO TV (with external input jacks) DVD OUT LINE OUT 2 VCR DVD/VCR ANTENNA IN RF OUT LINE IN 1 AUDIO R L VIDEO AUDIO R L VIDEO LINE OUT 1 DIGITAL AUDIO AUDIO R L S-VIDEO Y P R (C R ) P B (C B ) COMPONENT To AUDIOOUT jacks AUDIO cable(commercially available) (White) (R...

Page 19 - Digital Connection to an MD to Record a CD

17 GB DIGITAL IN COAXIAL DVD OUT LINE OUT 2 VCR DVD/VCR ANTENNA IN RF OUT LINE IN 1 AUDIO R L VIDEO AUDIO R L VIDEO LINE OUT 1 DIGITAL AUDIO AUDIO R L S-VIDEO Y P R (C R ) P B (C B ) COMPONENT Required cable Coaxial digital cable (commercially available) To coaxialDIGITAL OUT jack To coaxialdigital ...

Page 20 - Preparations Before Using the Product; Preparing to Watch a VCR or a DVD; The product is turned on.; Each time; VCR

GB 18 Preparations Before Using the Product Preparing to Watch a VCR or a DVD 1 Turn on the TV and switch the TV channel to the external“VIDEO” or “AV” channel connected to the DVD/VCR sharedoutput jacks. 2 Press OPERATE. • The product is turned on. 3 Press VCR/DVD SELECTOR on the remote control to ...

Page 21 - Select an unused channel on your TV.; Adjusting the Video Channel

19 GB / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT ANGLE CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW CH V...

Page 22 - Press; Press OPERATE to turn on the power of the Product. Select any

GB 20 Adjusting the Video Channel 7 Press \ \ \ \ \ / | | | | | to select the RF output system that corresponds to your TV by referring to the chart shown to the below, and pressSET. 8 Press OPERATE to turn on the power of the Product. Select any channel on the VCR tuner. If a picture appears and so...

Page 23 - Auto Tuning System; to turn on; SYSTEM; AUTOMATIC TUNING; CLOCK; LANGUAGE

21 GB / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT ANGLE CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW CH V...

Page 25 - VCR Setup

23 Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours) 23 GB 23 GB VCR Setup VCR Setup .................................................................................... 24 Menu Screen ............................................................................... 24 Mode Select...

Page 26 - MENU item list; Main Menu; Menu Screen

GB 24 VCR Setup • Numbers in refer to the pages where the settingprocedures are described. Menu Screen The menu screen is a home screen used to select various screenfunctions. A sub-menu will appear once you select an item for themenu. See the following pages for details on each menu procedure. • Th...

Page 27 - Mode Selection; Preparation; Select “MODE” with; and then press SET to confirm.; Then press

VCR Setup 25 GB Mode Selection You can set the basic functions listed in the table below on the MODEselection screen. Preparation • Press OPERATE. Then move the VCR/DVD CHANGE Switch toVCR. 1 Press VCR MENU to display the menu screen. 2 Select “MODE” with ' / " and then press SET to confirm. M O...

Page 28 - Set “NICAM” to “AUTO” or “OFF” with; OFF; Select “OFF” when your TV does not have good

GB 26 VCR Setup 4 Set “NICAM” to “AUTO” or “OFF” with \ \ \ \ \ / | | | | | . Then press " . A U T O R E N T A L O N O F F C O L O U R R E P E A T O N O F F A U T O P A L M E S E C A M N T S C N T S C 3 . 5 8 4 . 4 3 P A L T V B L U E B A C K A U T O O F F N I C A M A U T O O F F S . P I C T U R...

Page 29 - Setting the Channels; at the factory to be skipped.

VCR Setup 27 GB Setting the Channels Your Product can receive VHF channels 1A to E12 (US AIR 2 to 13), CATV/HYPER channels S1 to S41 and UHFchannels E21 to E69 (US AIR 14 to 78). Your Product has 84 programmable channel positions, each of whichcan be set to any of the broadcast and CATV/HYPER channe...

Page 30 - Auto Tuning

GB 28 VCR Setup Auto Tuning Preparation • Press OPERATE. Then move the VCR/DVD CHANGE Switch to VCR. • Ensure the Video channel is selected on the TV. 1 Press VCR MENU. Press ' / " to select “CHANNEL PRESET”. Press SET to confirm. M O D E M E N U C H A N N E L P R E S E T C L O C K L A N G U A G...

Page 32 - Manual Tuning; Tuning Channel Position 48 to Broadcast TV Channel E7

GB 30 VCR Setup / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW ...

Page 34 - Channel Skip/Cancelling Skip; Skip channel position 12.

GB 32 VCR Setup Channel Skip/Cancelling Skip Channel Skip If there are channel positions that are not preset, you can skip themwith the following procedure. Preparation • Press OPERATE. Then move the VCR/DVD CHANGE Switch toVCR. Example : Skip channel position 12. 1 Press VCR MENU. The menu screen w...

Page 35 - to set “ON” and press SET to confirm.; Press VCR MENU to return to the normal screen.

VCR Setup 33 GB / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW ...

Page 36 - Cancelling Skip; Example; Reset channel position 12.

GB 34 VCR Setup Cancelling Skip Example : Reset channel position 12. 1 Follow the steps 1 and 2 from “Channel Skip” on page 32. 2 Select the channel position you wish to unskip with \ \ \ \ \ / | | | | | or number buttons (0 to 9). F I N E T U N I N G S K I P O N O F F P R E S E T C H 1 2 C H A N N ...

Page 37 - Setting the Clock

VCR Setup 35 GB Setting the Clock When you use the Product for the first time or after a power failure ofmore than 60 minutes the clock has to be reset. Apply power to theProduct to switch it on. Then perform the following procedure. Initial Setting of Clock 1 First set the language and system setti...

Page 38 - Set the year digits with the number buttons (0 to 9) or; on; Press SET to return to the normal screen.; Changing the Clock Setting; Press VCR MENU. Press; to select “CLOCK” and press; SET to confirm. Press VCR MENU to return to the normal screen.

GB 36 VCR Setup / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW ...

Page 39 - Setting the Language; is pressed when the Product is operated for; is pressed. To reset the Product, perform the following steps.; Initial Setting of Language; Changing Language

VCR Setup 37 GB / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW ...

Page 40 - VCR Display Information; How to Display Indicators; Turn on your TV and select the video channel.; Each time ON SCREEN is pressed, the screen changes as follows:

GB 38 VCR Display Information The tape counter and VCR mode can be shown on the screen while you are playing back a tape or watching abroadcast on the video channel. How to Display Indicators 1 Turn on your TV and select the video channel. 2 Press OPERATE to turn on the Product. Mode indicators are ...

Page 41 - DVD Setup

39 GB DVD Setup DVD Setup ....................................................................................... 40 About the SETUP Screen .............................................................. 40 TV MODE Setting .......................................................................... 41 ...

Page 42 - About the SETUP Screen; • When you set the language to be used in the OSD, changing the; OSD Language Setting; on page 37 for details.; Setup item list

GB 40 About the SETUP Screen This section describes how to specify various basic settings using theSETUP screen. The list below shows all the items you can set andadjust. See the following pages for details on each setup procedure. • The setting procedures described on the following pages areavailab...

Page 43 - TV MODE Setting; or; RETURN

41 GB / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW CH VCR DVD...

Page 44 - PARENTAL Level Setting

GB 42 DVD Setup / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW CH VCR DVD SKIP DPS...

Page 45 - Country Code List

43 GB DVD Setup 5 Press ' , " , | or \ to select the desired parental level and then press ENTER. (Example) Selecting “LEVEL 8” • Level 1: for most restricted viewing → Level 8: for adult viewing (The smaller the number, the greater the level of restriction.) • When “PARENTAL” is set to “OFF”, D...

Page 46 - AUDIO Setting; digital output when playing a disc.

GB 44 DVD Setup AUDIO Setting COMPRESSION ............ Use this setting for increasing the average volume of Dolby Digital audio when playinga DVD. DIGITAL .................. Use this setting for specifying the type of digital output when playing a disc. CINEMA VOICE ............. Use the setting fo...

Page 47 - • Use of the “OFF” setting is recommended when the product is; to; Setting the DOLBY DIGITAL

45 GB DVD Setup 3 Use ' or " to select “COMPRESSION”. 4 Press ENTER to display the settings you can select. 5 Use ' or " to select “ON” or “OFF”. • Use of the “OFF” setting is recommended when the product is connected to audio equipment. 6 Press ENTER to confirm the setting. • When you have ...

Page 48 - Setting the MPEG; BITSTREAM: Use this setting for a digital connection of a; DIGITAL” and “MPEG”.; Setting the CINEMA VOICE

GB 46 Setting the MPEG • Before setting the “MPEG”, perform the step 1 to 2 on pages 47 and 48. 1 Press ENTER and then use ' or " to select “MPEG”. 2 Press ENTER to display the settings you can select. 3 Use ' or " to select “BITSTREAM” or “PCM”. BITSTREAM: Use this setting for a digital con...

Page 49 - DISC LANGUAGE Setting; You can set “AUDIO”, “SUB TITLE” or “MENU” individually.

47 GB DVD Setup DISC LANGUAGE Setting Use this setting for selecting the language for subtitles, audio tracksand disc menu. Setting SUBTITLE, AUDIO and MENU languages Preparation • See Preparing to Watch a VCR or a DVD on page 18. 1 Press DVD SETUP to display the SETUP screen. 2 Use ' or " to se...

Page 50 - Selecting languages from OTHER; See; Language Code List for Disc Language; when selecting the code.

GB 48 DVD Setup / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW ...

Page 51 - DVD Display Information; Operation Mode Indicators

49 GB DVD Display Information If no disc is loaded oran unplayable disc isloaded when thisproduct is switched on Tray open Tray closed Loading Stopped Playing Still/Paused Fast forward Fast reverse Slow Playback Control TV Screen DVD Front Panel Display Remarks Operation Mode Indicators Each time ON...

Page 53 - Watching the VCR

51 GB Watching the VCR Playback .......................................................................................... 52 Inserting a Video Cassette ............................................................. 52 Playback ............................................................................

Page 54 - Inserting a Video Cassette; PLAY. (The auto tracking control system engages and; Playback

GB 52 Inserting a Video Cassette Gently insert the video cassette into the cassette compartment. TheProduct turns on automatically. If the cassette is inserted incorrectly,the loading system will not function. Do not force the cassette into theProduct. When the cassette has been properly loaded, “ ”...

Page 55 - REW

53 GB Fast Forwarding and Rewinding 1 Press Ë STOP to stop the video tape. 2 Press FF è or È REW. 3 Press Ë STOP to stop fast forward/rewind. • If you use other than E-90/E-180 cassettes, fast forward and rewindmay take somewhat longer. Slow Motion Playback (with the Remote) 1 Press SLOW on the Remo...

Page 56 - Auto Head Cleaning System; Quick Start with Full Loading Mechanism

GB 54 NTSC Tape Play Back on PAL TV When you play back an NTSC tape on your Product, it is possible to use a PAL or multi-system compatible TV.However, please note the following: • The picture will shrink vertically to some degree, as shown in the diagram, but this does not indicate a malfunction in...

Page 57 - AUTO RENTAL; COLOUR

55 GB Playback AUTO RENTAL (This function only works when AUTO RENTAL mode on the MODEselection screen is set to “ON”.)The convenient auto rental mode lets you enjoy playback with ease.When you insert a cassette with the erasure protection tab removed(rental videos, etc.), your Product automatically...

Page 58 - BLUE BACK

GB 56 / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW CH VCR DVD...

Page 59 - Playback of Hi-Fi Recorded Tapes; The audio output mode is controlled by; AUDIO OUTPUT; on the; Adjusting Hi-Fi Audio Tracking; to obtain the optimal Hi-Fi audio tracking.

57 GB / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW CH VCR DVD...

Page 60 - Sharp Super Picture; Press VCR MENU to display the menu screen.

GB 58 Sharp Super Picture This function creates clearer picture quality only during playback. 1 Press VCR MENU to display the menu screen. 2 Select “MODE” with ' / " and then press SET to confirm. M O D E M E N U S E T : E N T E R M E N U : E X I T C H A N N E L P R E S E T : S E L E C T C L O C...

Page 61 - Auto Repeat; With this feature, the entire tape is played back repeatedly.

59 GB Auto Repeat / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLO...

Page 62 - Auto Zero Back

GB 60 The zero-back function makes the cassette fast forward (or rewind)to the previously set “0:00.00” point and stop there. 1 Make sure the counter is displayed, then press CLEAR on theRemote at the point you wish to return and later “0:00.00” isdisplayed. 2 Press ZERO BACK on the Remote. The Prod...

Page 63 - Index signal; Load a tape containing index signals into the Product.; Skip Search; When; SKIP SEARCH

61 GB DPSS With this feature you can quickly locate a desired section of the tape.The DPSS feature makes use of index signals to search for aspecified tape segment and begin playback automatically. Index signal An index signal is automatically recorded on the tape at the start ofordinary recording, ...

Page 64 - TV Programme Recording; Cassette Erase Protection; cassette has a removable tab to prevent accidental; Recording a TV Programme; Ensure the Video channel is selected on the TV.; Select the channel position you wish to record with CH

GB 62 TV Programme Recording / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMB...

Page 65 - Recording NICAM/IGR Multiplex Broadcasts; When receiving a stereo multiplex broadcast,

63 GB Recording NICAM/IGR Multiplex Broadcasts This Product is capable of receiving NICAM multiplex broadcasts (PAL-I, B/G, D/K) and IGR multiplex broad-casts (PAL- B/G, D/K). NICAM multiplex broadcasts will be recorded in stereo/bilingual when the NICAM setting on the OSD’s MODE is set to AUTO. For...

Page 66 - Immediate Recording; Select the channel position to be recorded with CH; REC to enter the normal recording mode. Then, press; Simple Recording Timer

GB 64 Immediate Recording This is convenient function when having an unexpected visitor ortelephone call. 1 Select the channel position to be recorded with CH ' / " . (Example) Channel position 2 S . P I C T U R E O N S P L R I / I I 1 5 / 1 2 0 0 0 : 0 0 . 0 0 R E P E A T 2 8 : 0 0 2 Press Æ Æ ...

Page 67 - This product has the G-; programming system. By simply inputting; number with the number buttons, you can programme your; numbers are listed in most newspaper, TV guide, and; Check that the clock is displaying the correct time.; Press VCR MENU. Then select “G-CODE” with; and press; to select daily/weekly setting mode and; CODE®

65 GB / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW CH VCR DVD...

Page 68 - Select the tape speed with

GB 66 Programming the Timer with G- CODE ® System / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/ST...

Page 69 - ” lights on the VCR Front Panel; Setting the Programme Number In Step 4; system for the first time the Programme; SEPVP D

67 GB Programming the Timer with G- CODE ® System / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/ST...

Page 70 - Recording with the Timer; Select the timer position with

GB 68 Recording with the Timer The timer can be set manually for automatic recording of up to 8events over a 365 day period. Preparation • Load the cassette, ensuring the erasure protection hole is covered.The Product power will automatically turn on. • Check that the clock is displaying the correct...

Page 72 - Select the speed with

GB 70 8 Select the speed with ' / " . D A T E P R S T A R T S T O P - - / - - - - - : - - - : - - - -- - / - - - - - : - - - : - - - -- - / - - - - - : - - - : - - - - 1 / 2 1 5 / 1 2 4 7 1 2 : 0 0 P M 1 2 : 3 0 P M S P • SP: Standard Play, LP: Long Play, EP: Extended Play 9 Press SET. To progra...

Page 73 - Confirming Timer Programmes; ” indicator on the VCR Front Panel; and then press SET to confirm .

71 GB Confirming Timer Programmes You can see on the On Screen Display a list of all timer programmesthat are already set. Preparation • Press OPERATE. Then move the VCR/DVD CHANGE Switch toVCR and select the video channel on the TV. 1 Press VCR MENU. (If the “ ” indicator on the VCR Front Panel dis...

Page 74 - Cancelling Timer Programmes; Select the programme you wish to cancel with; If there are still some programmes to be set, press; to enter the Timer Standby mode.

GB 72 Cancelling Timer Programmes Perform the following procedure to cancel timer programmes thathave already been set. Preparation • Press OPERATE. Then move the VCR/DVD CHANGE Switch toVCR and select the video channel on the TV. 1 Press VCR MENU. (If the “ ” indicator on the VCR Front Panel displa...

Page 75 - Tape Dubbing; Tape Dubbing Connection Instructions

73 GB Tape Dubbing Tape Dubbing Connection Instructions Your product can dub (copy) video material from another videodevice. It can also output video and audio signals for recording onother video or audio equipment. Audio/Video dubbing cannot bedone separately. 1 Switch your product to the auxiliary...

Page 76 - Recording a DVD Disc onto a Video Cassette; the VCR/DVD CHANGE Switch; Insert both the DVD disc and the video cassette for recording.; Press VCR

GB 74 Recording a DVD Disc onto a Video Cassette Use the following procedure to record the images and sounds on aDVD disc onto a video cassette. Recording a DVD disc onto a Video cassette(Tape Editing mode) Preparation TV • Turn on the TV and switch to the external “VIDEO” or “AV” channel. This Prod...

Page 79 - Watching the DVD

77 GB Watching the DVD W A TCHING THE DVD Preparing to Use DVD ..................................................................... 78 When connecting a TV with the DVD output Jacks ....................... 78 When connecting a TV with the DVD/VCR shared output jacks .... 78 Playback ..................

Page 80 - Preparing to Use DVD; The start up screen is displayed on the TV screen.; Move VCR/DVD CHANGE Switch on the Remote to DVD.; The VCR/DVD SELECTOR on the product lights up in green.; Light up in green

GB 78 Preparing to Use DVD / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBIN...

Page 81 - The icons below are used in this Operation Manual:; Basic Play; Track Direct Playback; Disc

79 GB Playback Preparation • See Preparing to Use DVD on page 78. DVD DVD C D C D CD-R/RW CD-R/RW C D C D VIDEO VIDEO • The icons below are used in this Operation Manual: DVD DVD ................... Indicates the functions that can be performed for DVDs. C D C D ................... Indicates the fun...

Page 82 - Fast Forward/Fast Reverse; The disc begins fast scan at

GB 80 Playback DVD DVD C D C D CD-R/RW CD-R/RW Fast Forward/Fast Reverse 1 Press FWD è or È REV during playback. • The disc begins fast scan at × 2 speed (1). • Three speeds are available for DVD, VIDEO CDs and AudioCDs. Each time FWD è or È REV is pressed, the speed of fast scan changes in the foll...

Page 83 - Frame Advance

81 GB Playback DVD DVD C D C D CD-R/RW CD-R/RW Still/Pause 1 Press â PAUSE/STILL during playback. 2 If you press û PLAY while paused (STILL/PAUSE), normal playback resumes. DVD DVD Frame Advance 1 Press â PAUSE/STILL during playback. • The playback is paused (STILL/PAUSE). • The disc goes forward by...

Page 84 - Angle Selection; Use; (or ANGLE) to change the scene to the next angle

GB 82 / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION SLOW CH VCR DVD...

Page 85 - Regarding MP3 discs; ment and the disc’s recording.; Playing MP3 discs; folders before recording.; CAUTION; Playing MP3 Discs

83 GB This product is able to play CD-R or CD-RW discs recorded in MP3 format. Regarding MP3 discs • MP3 files are audio data compressed in MPEG1 Audio layer 3 file format. “MP3 files” have “.mp3” as extensions. (Some files that have “.mp3” extensions or files that have not been recorded in MP3 form...

Page 86 - To skip the file while playing

GB 84 Playing MP3 Discs To play MP3 discs 1 Load the MP3 recorded CD-R or the CD-RW. • The folder selection screen will be displayed after the data isread. 2 Select the folder you want to play by using ' , " , \ or | and then press ENTER. • The file (music title) in the folder is displayed on th...

Page 87 - About the Function Control Screen; Direct title skip

85 GB 2/5 8/3‰‰1:3‰:‰82 ENGLISH11 5 1chONON . T T T C C C G ENTER RETURN SELECT ENTER BIT RATE Mbps 0 5 10 D DVD Using Function control, you can check at a glance and change the current settings of the following items:SUBTITLE, ANGLE, AUDIO, 3D VIRTUAL SURROUND and, DIGITAL GAMMA.Function control al...

Page 88 - and then press ENTER.

GB 86 About the Function Control Screen Direct skip (title [track]/chapter/time) Use the following procedure to perform the Direct title [track] skip,Direct chapter skip, or Direct time skip. 1 Press FUNCTION CONTROL during playback. • The Function control screen appears. 2 Use ' or " to select ...

Page 89 - Subtitle language setting; The Function control screen appears.; You can set the subtitle setting to “OFF”.; You can exit the Function control screen by pressing

87 GB DVD DVD About the Function Control Screen Subtitle language setting Use the following procedure to perform the Subtitle language setting. 1 Press FUNCTION CONTROL during playback. • The Function control screen appears. 2/5 8/3‰‰1:3‰:‰82 ENGLISH11 5 1chONON . T T T C C C G ENTER RETURN SELECT E...

Page 90 - Angle setting

GB 88 DVD DVD About the Function Control Screen Angle setting You can change the angle of view when playing a DVD disc thatcontains scenes recorded from multiple angles.Use the following procedure to perform the Angle setting. 1 Press FUNCTION CONTROL during playback. • The Function control screen a...

Page 91 - Audio setting

89 GB DVD DVD About the Function Control Screen Audio setting A number of different methods are used to record audio onto a DVDdisc, including multi-channels (used for voiceovers in other languages),Dolby Digital (5.1ch), DTS, and Linear PCM. This product provides anumber of different audio modes fr...

Page 92 - D VIRTUAL SURROUND setting; To use the 3D VIRTUAL SURROUND function

GB 90 DVD DVD 3D VIRTUAL SURROUND setting This function allows you to enjoy a “surround sound” effect when youare using an analog connection (using AV 1 OUT on this product) to2-channel audio equipment (TV, etc.). Preparation To use the 3D VIRTUAL SURROUND function • Set the “COMPRESSION” setting in...

Page 93 - DIGITAL GAMMA setting

91 GB DVD DVD DIGITAL GAMMA setting DIGITAL GAMMA is a digital image quality enhancement functionthat gives a richer image by brightening the darker and moreobscure portions of the image without altering the brightness of thebrighter portions, thereby making the entire image easier to see.Three digi...

Page 94 - Direct Selection of Scenes; Selecting Scenes by Title Number; PLAY, the title specified in step 2; Selecting Scenes from the Menu Screen

GB 92 T I T L E M E N U t a s 1 2 3 4 C s i he s F g o s D r i ds B T I T L E M E N U t a s 1 2 3 4 C s i he s F g o s D r i ds B Direct Selection of Scenes Selecting Scenes by Title Number 1 Press TITLE to show the title screen. (Example) 2 Use ' , " , | or \ to highlight the desired title. 3 W...

Page 95 - Programmed Playback; Chapter Programmed Playback

93 GB Programmed Playback The two types of programmed playback provided by this product arechapter programmed playback (DVD discs) and track programmedplayback (Audio CD discs). Chapter Programmed Playback 1 Press PROG while the disc is stopped. • The “DVD-VIDEO PROGRAM” screen appears. • Press PROG...

Page 96 - Track Programmed Playback; The “PROGRAM” screen appears.; to return to the normal screen.; PLAY to begin playing the programmed tracks.; The tracks will be played in the order they were entered.; STOP to stop programmed playback.; Example : CD PROGRAM screen

GB 94 Programmed Playback Track Programmed Playback 1 Press PROG while the disc is stopped. • The “PROGRAM” screen appears. • Press PROG to return to the normal screen. 2 Press ' or " to select the desired track and then press ENTER. • The track is programmed in the playlist. 3 Repeat step 2 for...

Page 97 - MP3 Files Programmed Playback

95 GB MP3 Files Programmed Playback 1 Press PROG while the disc is stopped. • The “MP3 PROGRAM” screen appears. • Press PROG to return to the normal screen. 2 Press ' or " to select the desired folder and then press ENTER. 3 Press ' or " to select the desired file and press ENTER. • The file...

Page 98 - Repeat Playback; Repeat playback

GB 96 Repeat Playback DVD DVD C D C D CD-R/RW CD-R/RW / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUS...

Page 99 - A-B repeat allows you to repeat specified section on the disc.

97 GB Repeat Playback / PLAY STOP OPEN/ CLOSE OPERATE VCR/ DVD SELECTOR VCR MENU DVD SETUP TAPE SPEED ON SCREEN TIMER ON/OFF TITLE DVD MENU DISPLAY EJECT FUNCTION CONTROL PROG/ REPEAT CLEAR RETURN REV FWD SET ENTER ZERO BACK SKIP SEARCH VCR DVD AM/PM INPUT SELECT PAUSE/STILL REC VCR/ DVD COMBINATION...

Page 100 - Resume Function; STOP at the desired point during playback.; “RESUME” appears followed by “RESUME” on the screen.; PLAY to restart play.; to resume disc play, if auto-playback starts; This resume operation is cancelled in the following cases.

GB 98 Resume Function DVD DVD This function enables you to resume the playback from the locationyou specify. 1 Press Ë STOP at the desired point during playback. • “RESUME” appears followed by “RESUME” on the screen. • This product stores the location where you stopped. 2 Press û PLAY to restart pla...

Page 101 - Troubleshooting; Problem; REC or TIMER

99 GB Troubleshooting ■ VCR/DVD ■ VCR Problem • No power • The Remote does not work. • No picture • DEW Suggested Solution • Is the power cord connected properly? • Is the power cord firmly plugged into the power outlet? • One of the safety mechanisms may be operating. In this event,unplug the Produ...

Page 102 - Suggested Solution

GB 100 ■ DVD Problem • The Product is switched on but doesnot operate. • The playback image does notappear. • No sound is produced. • The sound is not Dolby Digital (5chor 5.1ch). • The image and sound are garbled. • The sound is not stable duringplayback. Suggested Solution • Have you loaded a disc...

Page 103 - Definition of Terms; Enhanced picture quality during playback.; Angle

101 GB Definition of Terms This function automatically turns the power on and starts to playback when a tape withthe erasure protection tabs removed is inserted. Enhanced picture quality during playback. This function facilitates S-VHS software playback. The original high picture quality of S-VHS (h...

Page 104 - Pan Scan; Pickup; Laser device that reads the data from a disc for playback.; Common names; *Represents area name

GB 102 DVD Letter Box L B 4: 3 Linear PCMSound Pan Scan P S 4: 3 Pickup PlaybackControl (PBC) Region Definition of Terms This refers to a high-density optical disc on which high-quality pictures and sound havebeen recorded by means of digital signals. Incorporating a new video compressiontechnology ...

Page 105 - The world map for all region numbers; The list of the region number

103 GB Subtitles Time Number Title Menu Title Number Track Number VIDEO CD (VCD) MP3 These are the printed lines appearing at the bottom of the screen which translate ortranscribe the dialogue. They are recorded on DVD discs. This indicates the play time which has elapsed from the start of a disc or...

Page 106 - Specifications; JACKS

GB 104 Signal System NTSC/PAL DVD/VCR shared output jacks VIDEO jack: RCA Pin-jackAUDIO jack: RCA Pin-jack DVD output jacks VIDEO jack: S-Video jackComponent Y jack: RCA Pin-jackComponent P B jack: RCA Pin-jack Component P R jack: RCA Pin-jack AUDIO jack: RCA Pin-jackDIGITAL AUDIO IF: Coaxial digita...

Page 107 - Memo

Page 109 - OPERATION MANUAL; MODEL; SHARP CORPORATION

OPEN/CLOSE OPERATE EJECT/STOP REW PLAY/ × 2 REC CH VCR/DVD SELECTOR TIMER VCR DVD PLAY STOP AV 2 IN VIDEO L(MONO)-AUDIO-R / OPERATION MANUAL DV-NC70W VCR/DVD COMBINATION MODEL DV-NC70DV-NC70X NTSC/PAL 3 DV-NC70WDV-NC70 ENGLISH ...... GB 1 – GB 104 ...... C 1 – C 104 PAL NTSC Only for DV-NC70W 4 DV-N...