Sharp AR-5316 - Manuals

4 INSTALLING THE PRINTER DRIVER INSTALLATION IN WINDOWS XP (USB/PARALLEL CABLE) 1 The USB or parallel cable must not be connected to the machine. Make sure that the cable is not connected before proceeding. If the cable is connected, a Plug and Play window will appear. If this happens, click the ...

8 CONNECTING TO A COMPUTER Follow the procedure below to connect the machine to your computer.Interface cables for connecting the machine to your computer are not included with the machine. Please purchase the appropriate cable for your computer. Interface cable USB cable Shielded twisted pair cable...

9 CONFIGURING THE PRINTER DRIVER After installing the printer driver, you must configure the printer driver settings appropriately for the number of paper trays on the machine and the size of paper loaded in each. 1 Click the "start" button, click "Control Panel", click "Printers...

10 HOW TO USE THE ONLINE MANUAL The Online Manual provides detailed instructions for operating the machine as a printer. View the Online Manual when you use the printer functions after the initial setup is completed. 1 Insert the CD-ROM into your CD-ROM drive. 2 Click the "start" button, cli...

11 TROUBLESHOOTING If the software does not install correctly, check the following items on your computer.To remove the software, see "Removing the software" in the Operation Manual. Printer driver cannot be installed (Windows 2000/XP) If the printer driver cannot be installed in Windows 200...

PRINTED IN CHINA 2003M KS ➀ TINSE1209QSZZ Printed on 100% post-consumer recycled paper AR-5316/AR-5320/AR-5316 X/AR-5320 X SHARP CORPORATION !install̲ar5316̲5320.book  2 ページ  ２００３年１２月２日 火曜日 午前９時４２分

Quick Reference Guide: AR-5316 Adjustments 6 Section Adjustment Item Adjustment Procedure/SIM No. A Process section (1) Developing doctor gap adjustment Developing doctor gap adjustment (2) MG roller main pole position adjustment MG roller main pole position adjustment (3) Developing bias voltage ch...

Quick Reference Guide: AR-5316 Simulation 7 Simulation Entering the Simulation Mode Perform the following procedure to enter the simulation mode. “#” key → Interrupt key → “C” key → Interrupt key → Main code → Start key → Sub code → Start key SIM Codes Please refer to the SIM Codes list (pages 1 thr...

8 Quick Reference Guide: AR-5316 Simulation (Pg. 1 of 4) SIM Codes Main Code Sub Code Contents 01 Mirror scanning operation 02 Mirror home position sensor (MHPS) status display 01 06 Mirror scanning operation aging 01 Single paper feeder (SPF) Aging 02 SPF sensor status display 03 SPF motor operatio...

ProgramName ProgramNo. Description Default Parameters Auto clear time 1 “Auto clear time” automatically returns the copy settings to the initial settings when a certain period of time elapses after a copy is made. This program is used to select the period of time. “Auto clear time” can also be disab...

Quick Reference Guide: AR-5316 Maintenance Table Maintenance Table 14 X Check (Clean, adjust, or replace when required.)O Clean Replace Adjust ∆ Lubricate Legend Unit Name Part Name When Calling Reflector ○ Lamp unit Mirror ○ Mirror ○ No. 2/3 mirror unit Pulley X CCD peripheral Lens ○ Table glass ○ ...