Sennheiser IAS-MO 2000 - Manuals

6 Product overview IAS-MO 2000 Set Gain switch (coarse adjustment) Level control (fine adjustment), with 0 dB mark OVERLOAD LED ON/OFF button Cable grip for power supply DC cable DC socket for connection of power supply unit (DC IN) Audio output (AF OUT BAL), XLR-3M, balanced Audio output (AF OUT UN...

7 Putting the system into operation You can set up the device on an even surface or mount it into a 19” rack. Note: Do not fit the rubber feet when rack mounting the device. Setting up the device To ensure that the device cannot slip on the surface on which it is placed, fixthe supplied four self-ad...

8 To mount two central units into a rack: 왘 Place the two central units side by side upside-down onto a flat surface. 왘 Align the jointing plate over the holes in the bottom sides of the central units. 왘 Secure the jointing plate to the central units using eight of the supplied recessed head screws ...

9 Connecting the optical microphone 왘 Before connecting the optical microphone, remove the protections capsfrom the microphone connections and of the central unit. Keep the protection caps in a safe place for reuse during transport or storage. Theyprotect the microphone connections against dirt. 왘 C...

11 Switching the central unit on/off After connection to the mains, the device switches on automatically and the ON button lights up. 왘 Press the ON button to switch the MO 2000 CU central unit on or off. Note: If the power supply is interrupted for several seconds (e.g. due to a powerfailure), the ...

13 Care and maintenance To clean the MO 2000 CU central unit: 왘 Before cleaning, disconnect the device from the mains. 왘 Use a soft, dry cloth to clean the device. To clean the MZWW 2000 weather and wind protection: 왘 Use a soft, slightly damp cloth to clean the weather and wind protection. Danger t...

14 Specifications MO 2000 CU central unit Housing 1 / 2 19” metal housing Front panel connections andcontrols ON/OFF button with operation indicator,OVERLOAD LED,gain control (coarse adjustment),level control (fine adjustment), with 0 dB mark Rear panel connections andcontrols DC socket for connecti...

15 Fiber optic extension cable (optional) Interface SC Design multimode 200/230 μ m Cable loss approx. 3–4 dB per 100 m Optical transducer (optional) Interface socket/socket Design type SC Coupling losses 5–6 dB per coupling pair AF cable Design balanced microphone cable with shielding Connector ass...

16 Manufacturer Declarations Warranty Sennheiser GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site atwww.sennheiser.com or contact your Sennheiser partner. CE Declaration of Conformity This equipment is in compliance with ...