Page 3 - Safety instructions
1 Safety instructions y Please read these instructions carefully andcompletely before using the headset. y Make these instructions easily accessible to all usersat all times. y Always include these instructions when passing theheadset on to third parties. y The headset is capable of producing sound ...
Page 4 - Intended use of the headset; Intended use includes:; Improper use
2 Intended use of the headset Intended use includes: • having read these instructions especially the chapter“Safety instructions”. • use of the headset in jet aircraft and within theoperating conditions as described in theseinstructions. Improper use Improper use means use of the headset other than ...
Page 5 - Features; Extr emely lightweight
3 HD 46 / HME 46 The HD 46 headphones and the HME 46 headset featuredynamic, open headphones. The noise-compensatingcondenser microphone ensures excellent speech trans-mission even in noisy environments. Designed for use inaircr aft cockpits. Features y Extr emely lightweight y Extr emely comfortabl...
Page 6 - Delivery includes; HD 46 headphones / HME 46 headset; Operation; Turning the microphone boom (except HD 46)
4 Delivery includes y HD 46 headphones / HME 46 headset y Cable clip y Wind and pop screen (except HD 46-K1) y Instructions for use y Carry bag y EASA Form 1 Operation Turning the microphone boom (except HD 46) The microphone boom can be rotated. This allows theheadset to be worn with the microphone...
Page 10 - Adjusting the microphone sensitivity
8 Adjusting the microphone sensitivity The microphone sensitivity has been factory pre-set to80 mV/Pa as per RTCA DO-214. You can change themicrophone sensitivity by turning a small screwdriver inthe direction of the arrow. + –
Page 11 - Care and maintenance; Cleaning the headset
9 Care and maintenance Cleaning the headset Use a soft, slightly damp cloth to clean the headset fromtime to time. If the headset is very dirty, use a clothdampened with mild, soapy water. Replacing the earpads For reasons of hygiene, the black earpads should bereplaced from time to time. Grasp the ...
Page 12 - Accessories and spare parts; HZC 08 cable clip
10 Accessories and spare parts By changing the cable, you can simply retrofit yourheadset (see “Product var iants” on page 11). y Cable -C Cat. No. 500840 y Cable -K Cat. No. 500841 y Cable -K1 (HD 46 only) Cat. No. 500970 y Cable -N Cat. No. 500843 y Cable -V-K Cat. No. 500847 y MZQ 2002 cable clip...
Page 13 - Product variants; Variant
11 Product variants Variant (Cat. No.)(Part Number) Description Single-sided round cable HD 46 (500899)(046-69) Dynamic headphones – HD 46-K1 (500462)(046-69-999-0931) Dynamic headphones with ¼“ (6,3 mm) jack plug, length 1.85 m HME 46 (500850)(046-55) Headset with condenser microphone – HME 46-C (5...
Page 14 - Connector assignment
12 Connector assignment HME 46-C HD 46-K1 and HME 46-K HME 46-N Solder side 123 Audio Hi Audio LoMicrophone Hi 45 1 2 3 4 5 Microphone Lonot assigned ¼" (6.3 mm) jack plug PJ-068 equivalent 123 Audio Hinot assignedAudio Lo 123 not assignedMicrophone HiMicrophone Lo 1 2 3 1 2 3 Solder side 1 Audi...
Page 15 - Headphones
13 HME 46-V-K Specifications HD 46 headphones Headphones Transducer principle dynamic, open Ear coupling supra-aural Frequency response 20–14,000 Hz Impedance 600 Ω Characteristic SPL 93 dB SPL at 1 kHz, 1 mW 95 dB SPL at 1 kHz, 1 V THD < 1 % at 110 dB SPL (350–3,000 Hz) Contact pressure approx. ...
Page 17 - Manufacturer Declarations; Warranty regulations
15 Manufacturer Declarations Warranty regulations The gua rantee period for this Sennheiser product is 60 months from thedate of purchase. Excluded are accessory items, rechargeable ordisposable ba tteries that a re delivered with the product; due to theircha racteristics these products ha ve a shor...
Page 18 - CE Declaration of Conformity
16 CE Declaration of Conformity This equipment is in compliance with the essential require-ments and other relevant provisions of Directive 89/336/EU.The declara tion is ava ilable on the internet site atwww.sennheiser.com. Before putting the device into operation, please observe the respectivecount...