Sennheiser EK 3041-U - Manuals

Page 2 - Thank you for choosing Sennheiser!

28 Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over manyyears. Please take a few moments to read these instructions carefully, as we want youto enjoy your new Sennheiser product quickly and to the full. Chapter Contents ...............................

Page 3 - Brief description; Special features; Stereo FM working on the „pilot tone“ principle

29 1 Brief description The EK 3041-U is a miniature true diversity radiomicrophone receiverdesigned for use with the new digital ENG camcorders. It can be inserted inthe slot-in facility of most professional camcorders such as the Philips LDK120, Ikegami Hl-77 or Sony SX. Together with a suitable Se...

Page 5 - Diversity reception

31 electronic switching from one signal to another receiver 2 receiver 1 AF-signal AF-signal 5 Diversity reception The EK 3041-U receiver operates on the „true diversity“ principle: A receiving antenna receives not only the electromagnetic waves which reachit by a direct path, but also the reflectio...

Page 7 - Mounting the antennæ

33 Your EK 3041-U receiver is supplied with two antenna which are necessaryfor true diversity operation (see chapter 5). The length of the antenna has beenmatched to the frequency range of your EK 3041-U receiver. Insert the antenna into sockets 햳 and 햸 and screw them tight. 7 Mounting the antennæ

Page 8 - Mounting the receiver into the camcorder:

34 PHILIPS 8 Mounting the EK 3041-U into thePhilips LDK 120 camcorder Preparation: Mount the base platesuitable for the Philipscamcorder and fix itto the left and right of thereceiver by means of two screws.The Philips adaptor featuresa 44-pin connector (accessories). Mounting the receiver into the ...

Page 10 - into the Sony SX camcorder

36 SONY 10 Mounting the EK 3041-U into the Sony SX camcorder Preparation: Mount the base platesuitable for the Sony camcorderand fix it to the left and rightof the receiver by meansof two screws.The Sony adaptor featuresa 15-pin connector (accessories). Mounting the receiver into the camcorder: • Sc...

Page 14 - once; With the; briefly; see

40 17 Adjusting the headphone volume 씰 Briefly press the SET button once . The display now indicates „PHonE“ in alternation with a three-digit numberindicating the current volume level at the headphone output of your EK 3041-U receiver. The adjustment range of the headphone volume is between 0 an126...

Page 15 - twice

41 18 Adjusting the squelch Your EK 3041-U receiver is equipped with an adjustable squelch controlwhich eliminates annoying noise when the transmitters are switched on andoff. It also suppresses sudden noise when a transmitter leaves the receptionarea and there is no longer sufficient transmitter po...

Page 16 - three times; Only now does the receiver change to the new frequency; Notes

42 19 Changing the receiving frequency 씰 Briefly press the SET button three times . The display now indicates the preset receiving frequency in alternationwith the channel number assigned. (If no channel number has beenassigned, three „hyphens“ appear on the display): 씰 With the / buttons you can no...

Page 17 - four times

43 20 Assigning a channel number You can assign a channel number (from 001 to 255) to each of the 32 receivingfrequencies. With larger systems, it is recommended to use the same channelnumber for both transmitters and receivers in order to provide for simplermonitoring of the system. 씰 Briefly press...

Page 18 - Note; not

44 21 Limiter Your EK 3041-U receiver is equipped with a switchable limiter which limitsthe output voltage of the built-in headphone amplifier. The limiter protectsyour hearing and should therefore always be switched on. Note The limiter can only be used if the receiver is not inserted in the slot-i...

Page 19 - six times; Unlocking the buttons

45 22 Locking the operating buttons / „Lock mode“ function You can lock the operating buttons of your EK 3041-U to prevent accidentalprogramming or switching off by a user inexperienced in handling thereceiver. Locking the buttons 씰 Briefly press the SET button six times until „Loc“ begins to flash ...

Page 21 - 4 Suitable Sennheiser transmitters

47 24 Suitable Sennheiser transmitters For the optimum use of the excellent reception qualities of the EK 3041-Ureceiver, Sennheiser offers hand-held and pocket transmitters in a variety ofconfigurations: Pocket transmitters: • SK 1063-U (without display of battery status) • BF 1083-U (without displ...

Page 22 - Error

48 25 Safety instructions 씰 Never open electronic devices! Servicing and programming must only bedone by authorised personnel and is all the more important for current-carrying units. If devices are opened by customers in breach of thisinstruction, the warranty becomes null and void. 씰 Keep the rece...

Page 24 - 9 Technical data

50 29 Technical data Frequency range 450–960 MHz Receiver frequencies max. 32, pre-programmed to customerspecifications Switching bandwidth 24 MHz Frequency stability ± 10 ppm (– 10 ° C to + 55 ° C) Sensitivity (with HiDyn plus ® ) typ. 10 µ V for 90 dBA rms SNR Squelch treshold 0 to 100 µ V, adjust...

Page 25 - Printed in Germany

148 Sennheiser electronic GmbH & Co. KGD-30900 WedemarkTelefon: +49 (0) 5130 600 0Telefax: +49 (0) 5130 600 300 Printed in Germany Publ. 04/98 69668 / A 01 Aktuelle Informationen zu Sennheiser-Produkten erhalten Sie auch im Internetunter „http://www.sennheiser.com“. Up to date information on Sen...