Seiko CAL. 7T94 - Manuals

5 English SETTING THE TIME ANDADJUSTING THE STOPWATCH HAND POSITION 6 Minute hand Hour hand CROWN Pull out to second click when the second hand is at the 12 o’clock position. CROWN T u r n t o s e t t h e h o u r a n dminute hands. Smallsecondhand 1. MAIN TIME SETTING ● This watch is so designed tha...

6 English 1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to “0”. 2. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time require...

8 English SETTING THE DATE ● Before setting the date, be sure to set the main time. 6 ➠ ➠ CROWN Pull out to first click. ▼ Turn clockwise until the desired dateappears. ▼ Push back in to normal position. Date 1. It is necessary to adjust the date at the end of February and 30-day months. 2. Do not s...

9 English STOPWATCH ● The stopwatch can measure up to 60 minutes in 1/5-second increments. ● After 60 minutes, it will start counting again from “0” repeatedly up to 12 hours. 6 A B ✩ Before using the stopwatch, be sure to check that the crown is set at the normalposition and that the STOPWATCH hand...

10 English Accumulated elapsed time measurement A START A STOP RESTART ▼ ▼ A STOP RESET B ▼ A ○ ○ ○ ○ ▼ * Restart and stop of the stopwatch can be repeated by pressing button A. Split time measurement A START SPLIT ▼ ▼ A STOP RESET B ▼ ○ ○ ○ ○ ▼ B B * Measurement and release of split time can be rep...

11 English SECURITY LOCK BUTTON OPERATION (for models with security lock button) Locking the push-button - Turn Security Lock Button clockwise until you no longer feel the threads turning.- The button cannot be pushed in. Unlocking the push-button - Turn Security Lock Button counterclockwise until y...

12 English TACHYMETER(for models with tachymeter scale on the dial) ● Tachymeter scale can be used only when the time required is less than 60 seconds. To measure the hourly average speed of a vehicle Use the stopwatch to determinehow many seconds it takes to go1 km or 1 mile. 1 Tachymeter scale ind...

13 English To measure the hourly rate of operation Use the stopwatch to measurethe time required to complete 1job. 1 Tachymeter scale indicated bySTOPWATCH second hand givesthe average number of jobs ac-complished per hour. 2 Ex. 1 STOPWATCHsecond hand:20 seconds Tachymeter scale: “180” “180” (tachy...

14 English BATTERY CHANGE The miniature battery which powers your watch should last approximately 5 years . However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in yourpossession may be less than the specified period. When t...

15 English ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. Ifa child swallows it, consult a doctor immediately. WARNING ● Never short-circuit, heat or otherwise tamper with the battery, and neverexpose it to fire. The ba...

16 English SPECIFICATIONS 1 Frequency of crystal oscillator .................. 32,768 Hz (Hz = Hertz … Cycles per second) 2 Loss/gain (monthly rate) ............................ ± 15 seconds at normal temperature range (5 ° C ~ 35 ° C) (41 ° F ~ 95 ° F) 3 Operational temperature range .................

English English TELEMETER (for models with telemeter scale on the dial) ● The telemeter can provide a rough indication of the distance to the source of light and sound. ● The telemeter indicates the distance from your location to an object that emits bothlight and sound. For example, it can indicate...