Sears SR10095- Manuals

2. If the bracket side of the range Is adjacent to a cabinet, place the bracket against back wall and cabinet as shown In Figure 1. If there Is no adjacent cabinet, determine where the location of the range side (painted outside panel) win be. Place the bracket with Its outside edge at this location...

PREPARATION Remove all tape and packaging. Remove clear plastic film that covers some parts (around glass oven doors, side trim) and any tape or packaging from inside the oven. Remove the accessory pack from the oven.Check to see If any range parts have come loose during shipping. ELECTRICAL REQUIRE...

THREE-WIRE CORD CONNECTION KIT Remove the screws on the Junction block studs. Install the three-wire cord and the strain relief In the hole In the connection plate. Connect the red and black leads to the outer terminals and the white lead to the center terminal. Push the cord upward (to relieve stra...