Sears 831.159360- Manuals

Page 3 - BEFORE YOU BEGIN

3 BEFORE YOU BEGIN ASSEMBLED DIMENSIONS:Height: 76 in.Width: 38 in. Length: 59 in. Low Pulley Station Foot Plate High Pulley Station Lat Bar Leg Lever Butterfly Arms Press Arm Squat Arm Weight Stack Seats Backrests Thank you for selecting the WEIDER ® PRO 9625 Home Gym System. The versatile PRO 9625...

Page 4 - ASSEMBLY; FRAME ASSEMBL

4 ASSEMBLY 1 2 27 11 11 1 5 78 78 3 5 51 51 11 4 1 Before beginning assembly, carefully read thefollowing information and instructions: • Place all parts of the home gym system in acleared area and remove the packing materials;do not dispose of the packing materials untilassembly is completed. • The...

Page 7 - ARM ASSEMBL

7 8. Attach the upper ends of the Weight Guides(62) to the Top Frame (55) with the 5/16” x 6”Bolt (60), two 1/2” x 3/4” Spacers (61), and a5/16” Nylon Locknut (3). Tighten all Nylon Locknuts used in steps 2through 8. 9. Press a 1” x 7/8” Plastic Bushing (75) ontoeach welded spacer on the Press Frame...

Page 9 - CABLE ASSEMBL

9 14. During steps 15 through 36, refer to the CABLE DIAGRAM on page 23 of this manualto verify proper cable routing. Before begin-ning this section, identify the Long Cable (86),the Medium Cable (23), and the Short Cable(58) by comparing the lengths and ends of thecables. IMPORTANT: While assemblin...

Page 16 - SEA

16 38. Press a 1 3/4” Square Inner Cap (44) into the Rear Seat Frame (77). Insert the 1/4” x 2 1/2” Carriage Bolt (91) intothe center hole in a Seat Plate (37). Attachthe Seat Plate to a Seat (13) with two 1/4” x1/2” Screws (18). Insert the 1/4” x 2 1/2” Carriage Bolt (91) intothe indicated hole in ...

Page 18 - MISC

18 44. Press 3/4” Round Inner Caps (34) into the ends of both Pad Tubes (28). Insert one Pad Tube (28) into the Front SeatFrame (36). Slide a Foam Pad (30) onto eachend of the Pad Tube. Insert the other Pad Tube (28) into the LegLever (29). Slide a Foam Pad (30) onto eachend of the Pad Tube. 45. Rem...

Page 19 - ADJUSTMENT

19 ADJUSTMENT The instructions below describe how each part of the home gym system can be adjusted. Refer to the exerciseposter accompanying this manual to see how the home gym system should be set up for each exercise. IMPOR- TANT: When attaching the lat bar or nylon strap, make sure that the attac...

Page 22 - TROUBLE-SHOOTING AND MAINTENANCE

22 TROUBLE-SHOOTING AND MAINTENANCE Inspect and tighten all parts each time you use the home gym system. Replace any worn parts immediately. Thehome gym system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable...

Page 23 - CABLE DIAGRAM

23 4 3 2 7 7 8 8 6 2 5 4 3 2 Base— 10 6 1 —Low Pulley 1 —High Pulley Long Cable (86) Medium Cable (23) Rear Upright— 1 9 —Weight Stack 9 Short Cable (58) 5 CABLE DIAGRAM The cable diagram below shows the proper routing of the Short Cable (58), the Medium Cable (23), and theLong Cable (86). Use the d...

Page 28 - EXPLODED DRA

21 9 15 71 85 21 12 20 15 66 21 15 21 87 80 58 93 27 10 43 23 72 3 10 2 12 81 81 15 15 21 1043 41 3 21 6 50 7 58 10 2 78 78 19 11 11 1 27 51 5 11 12 15 66 1 27 3 3 21 66 12 57 21 71 66 15 3 9 3 6 21 9 85 9 21 15 66 21 65 34 34 30 30 35 32 8 3 28 30 34 28 30 34 10 33 2 24 14 40 38 18 37 13 31 46 44 4...

Page 29 - REPLACEMENT PARTS; FULL 90 DAY WARRANTY

Part No. 132823 R0896A Printed in Canada © 1996 Sears, Roebuck and Co. Model No. 831.159360 QUESTIONS? If you find that: • you need help assembling or operating the WEIDER ® PRO 9625 • a part is missing • or you need to schedule repair service call our toll-free HELPLINE 1-800-736-6879 Monday–Saturd...