Sears 580.761652- Manuals

Page 2 - TABLE OF CONTENTS; LIMITED ONE YEAR WARRANTY ON CRAR*SMAN HIGH PRESSURE WASHER; This warranty does not cover:

TABLE OF CONTENTS SAFETY RULES...................................................... 3 ASSEMBLY........................................................ .4-5 OPERATION..................................................... 6-10 MAINTENANCE .............................................. 10-12 SERVICE AN...

Page 3 - SAFETY RULES; read this manual and follow all Safety; MAINTENANCE AND STORAGE:

A SAFETY RULES CAUTION: ALWAYS DISCONNECT SPARK PLUG WIRE AND PLACE WIRE WHERE IT CANNOT CONTACT SPARK PLUG, TO PREVENT ACCIDENTAL STARTING WHEN SETTING UP TRANSPORTING, ADJUSTING OR MAKING REPAIRS TO YOUR HIGH PRESSURE WASHER. OPERATION: ' Do not spray flammable liquids. • Never allow any part of ...

Page 4 - ASSEMBLY; TO REMOVE PRESSURE WASHER FROM; Loosen knobs; CARTON CONTENTS

ASSEMBLY The following parts are shipped loose with your pressure washer: • Main Unit — pressure washer with wheels, guide han dle and turbo nozzle. • High Pressure Hose• Manual Bag (which includes the items listed below) • Nozzle Cleaner Kit• Accessories Adaptor • Parts Box (which includes items l...

Page 5 - CHECKLIST; MtL

Cut the tie wraps on the high pressure hose and connect high pressure hose to gun. Tighten by hand. Piace assembled spray gun on holder. Remove plastic cap and connect high pressure hose to pump. Tighten by hand. Screw nozzle to nozzle extension. Connect nozzle extension to spray gun. CHECKLIST Befo...

Page 6 - OPERATION; KNOW YOUR HIGH PRESSURE WASHER

OPERATION Read this owner’s manual and safety rules before operating your high pressure washer. Compare the itlustra- tions with your high pressure washer to familiarize yourself with the iocations of various controls and adjustments. Save this manual for future reference. KNOW YOUR HIGH PRESSURE WA...

Page 7 - HOW TO USE YOUR PRESSURE WASHER

iF YOU HAVE ANY PROBLEMS operating your pres sure washer, please call the pressure washer helpline at 1-800-222-3136. HOW TO USE YOUR PRESSURE WASHER WARNING NEVER adjust spray pattern when spraying. NEVER put hands In front of spray nozzle to adjust spray pattern. You couid be injury. HOW TO USE T...

Page 9 - TO START YOUR PRESSURE WASHER

® Wipe dipstick clean. ® Pour oil from enclosed bottle into the oil fill opening until oil reaches FULL mark on the dipstick. Stop and check the oil level periodically. DO NOT OVERFILL. » install oil dipstick, hand tighten securely. ADD GASOLINE WARNING NEVER fill fuel tank indoors, NEVER fill fuel ...

Page 10 - MAINTENANCE; CUSTOMER RESPONSIBILITIES

• Reconnect the wand extension. Note: After reconnecting the wand extension, you may need squeeze trigger again on pressure washer wand to relieve the air pressure caused by water inlet supply. Water wiil spew out of the gun in a thin stream. This will make it easier to puil start the engine. To sta...

Page 11 - Bil

GENERAL RECOMMENDATIONS The warranty of the high pressure washer does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain high pressure washer as instructed in this manual. Some adjustments will need to be made per...

Page 12 - ENGINE MAINTENANCE; CHECKING OIL LEVEL

ENGINE MAINTENANCE A CAUTION: Disconnect spark plug wire from spark plug and keep wire away from spark plug. CHECKING OIL LEVEL Oil level should be checked prior to each use or at least every 6 hours of operation. Keep oil level maintained. CHANGING ENGINE OIL Change oil after first 8 hours of opera...

Page 13 - SERVICE AND ADJUSTMENTS; CARBURETOR

SERVICE AND ADJUSTMENTS CARBURETOR If you think your carburetor needs adjusting, see your nearest Sears Service dealer. Engine performance may be affected above 4,000 feet in altitude. To improve engine performance, see your nearest Sears Service dealer. . NOZZLE MAINTENANCE if the nozzle becomes re...

Page 15 - PROBLEM

TO O T . ’■■■ .............................. -- PROBLEM CAUSE I CORRECTION Pum p has following probie m s: failu re to produce pressure, erratic 1. N ozzle in low pressure m ode. 1. Pull nozzle backw ard for high pressure m ode. pressure, chatterin g, loss of 2. W ater in let is blocked. 2. C lear i...

Page 16 - Pmfs

Pmfs CRAFTSMAN 1650 PSi HIGH PRESSURE WASHER 580,761652 ¡6

Page 17 - PARTS; ITEM PART NO. DESCRIPTION

PARTS CRAFTSMAN 1650 PSI HIGH PRESSURE WASHER 580.761652 ITEM PART NO. DESCRIPTION 1 21416 2 20089A 3 21207A 4 21449 5 97769 6 20441 7 A1405 8 81895 9 20042 10 30809 11 21450 12 97741 13 21206 14 75402 15 B1013 16 B1127 17 52858 18 A1408 19 21782 20 21781 21 87841 22 39414 23 96796 24 39288 25 A1040...

Page 24 - For information on purchasing a Sears; REPAIiSEmCES; America's Repair Specialists

F o r th e re p air o r rep la ce m e n t p a rts y o u n ee d d eliv ere d d ire ctly to yo u r h o m e Call 7 a.m, - 7 p.m., 7 days a week 1-800-366-PART (1-800-366-7278) F o r in -h o m e m ajo r b ran d re p air s erv ic e Call 24 hours a day, 7 days a week 1-800-4-REPAIR ( 1 - 800 - 473 - 7247 ...