Sears 315.10186- Manuals

SAFETY INSTRUCTIONS FOR CHARGER V WARNING! READ AND UNDERSTAND ALL ^ INSTRUCTIONS. Failure to follow all Instructions listed below, may result In electric shock, fire and/or serious personal injury. Before using badery charger, read all Instructions and cautionary markings In this manual, on battery...

SYMBOLS Important: Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper Interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNAT10N/EXPLANAT1ON V Volts Voltage A Amperes Current Hz Hertz Frequency (...

FEATURES PRODUCT SPECIFICATIONS Chuck........................................3/8 in. (10 mm) Keyless Motor........................................................ 14.4 Volt DC Switch................................................... Variable Speed Gear Train............................................

FEATURES TORQUE ADJUSTMENT RINQ KETLESS CHUCK CHARQER ASSEMBiy BiT STORAGE DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) Fig. 1 UNPACKING INSTRUCTIONS When unpacking the tooi: ■ Carefully remove the tool and accessiries from the box. ■ Make sure that all items listed in the packing list are in­ c...

OPERATION WARNING: Do not allow familiarity with your drill- dhver to make you careless, ftemember that a careless fraction of a second is sufficient to inflict severe injury. CHARGING YOUR DRILL-DRIVER The battery pack for this tool has been shipped in a low charge condition to prevent possible pro...

OPERATION LATCHES DEPRESS UTCHES TO ^ RaEASE BATTERY PACK Fig. 4 SWITCH See Rgure 5. Your drill starts and stops by depressing and releasing the switch trigger. Release the switch trigger to turn drill OFF. VARIABLE SPEED See Figure 5. Your drill has a variable speed feature in the swltr^. The switc...

OPERATION SCREWDRIVING TORQUE ADJUSTMENT (Driving power of your drill-driver) When using your drill-dilver for various driving applica­tions, It becomes necessary to increase or decrease the torque in order to help prevent the possibility of damaging screw heads, threads, workpiece, etc. in genera/,...

OPERATION INSTALLING BITS ■ Place the direction of rotation selector in center position. See Figure 5. This will turn off the power to your drill. ■ Open or close the chuck Jaws to a point where the opening is slightly larger than the bit size you intend to use. Aiso, raise the front of your drill s...

OPERATION WARNING: Always wear salety goggles or safely glasses with side shields when operating toot.Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury, DRILLING See Figure 11. When drilling hard, smooth surfaces, use a center punch to mark th...

OPERATION CHUCK REMOVAL See Figures 12-14. ■ Lock the switch trigger by piecing the direction of rotatbn seiector in center position. See Figure 5. ■ Insert a 5/16 inch or iarger hex key into the chuck of your driif and tighten the chuck jaws securely. ■ Tap the hex key sharply with a mallet in a cl...

MAINTENANCE ▲ WARNING; When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Do not abuse power tools. Abusive practices can damage tool as well as worfcpfece. ▲ WARNING: Always remove the battery pack from the tool when as...

COMPANION 14.4 VOLT CORDLESS DRILL MODEL NO. 315.101860 The model number will be found on a (^ate attached to the motor housing. Always mention the model number in all correspondence regarding your CORDLESS DRILL-DRIVER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS Key...

COMPANION 3/8 in. 14.4 VOLT CORDLESS DRILL-DRIVER - MODEL NUMBER 315.101860 HEAT SINK

Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself. For Sears professional installation of...