Sears 200.71988- Manuals

Page 3 - TAbLE Of CONTENTS

TAbLE Of CONTENTS SECTION PAgE 1. IMPORTANT SAfETY INSTRUCTIONS 1 2. PRODUCT fEATURES 2 3. CHARgINg THE INTERNAL bATTERY 3 4. JUMP-STARTINg A vEHICLE ENgINE 4 5. DIgITAL DISPLAY fUNCTIONS 5 6. POwERINg A 12v DC DEvICE 5 7. USINg THE USb PORT 6 8. USINg THE bUILT-IN LIgHT 6 9. INTERNAL bATTERY REPLAC...

Page 4 - CHARgE IMMEDIATELY AfTER PURCHASE; IMPORTANT: READ AND SAvE THIS SAfETY AND INSTRUCTION MANUAL.

• 1 • IMPORTANT: CHARgE IMMEDIATELY AfTER PURCHASE IMPORTANT: READ AND SAvE THIS SAfETY AND INSTRUCTION MANUAL. IMPORTANT SAfETY INSTRUCTIONS 1. Charge the 1150’s internal battery immediately upon purchase, every 30 1.1 days and after every use.Use in a well ventilated space. 1.2 Contains a sealed, ...

Page 5 - DIEHARD PORTAbLE POwER 1150; Turn on to activate clamps and

• 2 • DIEHARD PORTAbLE POwER 1150 2. JUMP-STARTER/DC POwER SOURCE 1. JUMP START ON/OFF Switch. Turn on to activate clamps and USB. 2. Inverter/Compressor switch. This switch turns the inverter or air compressor on and off. 3. Digital Display – indicates internal and vehicle’s battery percentage of c...

Page 6 - Internal battery’s percentage is most accurate when the Portable; CAUTION; : Operating the Portable Power 1150 while the internal battery is

• 3 • CHARgINg THE INTERNAL bATTERY 3. IMPORTANT: CHARgE IMMEDIATELY AfTER PURCHASE • KEEP fULLY CHARgED. • This Portable Power 1150 comes with a sealed, non-spillable DieHard maintenance-free lead-acid battery. This internal battery is specifically designed to deliver high power jump-starting as we...

Page 7 - JUMP-STARTINg A vEHICLE ENgINE; In the rare case of jump-starting a vehicle that has a positive-

• 4 • JUMP-STARTINg A vEHICLE ENgINE 4. Use in a well-ventilated area. Keep hands, hair, clothing and jewelry clear of fan blades, belts, pulleys and other parts that may cause injury.Turn ignition off before making cable connections. 4.1 Place the 1150 on a flat, stable surface near the vehicle bat...

Page 8 - DIgITAL DISPLAY fUNCTIONS; total wattage used by the device being powered by the inverter.; POwERINg A 12v DC DEvICE; will automatically reset after an overload occurs.; To Operate a 12v DC Device:; drain. Recharge immediately after unplugging the device.

• 5 • DIgITAL DISPLAY fUNCTIONS 5. To check the 1150’s internal battery’s status, push the power switch on 5.1 the front of the 1150 to the DISPLAY position. The display will show the charge percentage of the internal battery. When connected to the vehicle, the display shows the vehicle’s battery 5....

Page 10 - Bike Tire

• 7 • INTERNAL bATTERY REPLACEMENT 9. The 1150 is equipped with a built in door, located on the back of the unit, to make replacing the internal battery easy and efficient.To order a replacement battery, call: 1-800-SEARS-64.Be sure that all switches are in the OFF position. 9.1 Remove clamps from s...

Page 12 - Portable Power

• 9 • bEfORE USINg THE INvERTER 14. Important Safety Instructions:Keep the 1150 well ventilated in order to properly disperse heat generated 14.1 while it is in use. Make sure there are several inches of clearance around the top and sides and do not block the vents on the back of the 1150.Make sure ...

Page 13 - POwERINg A 110v AC DEvICE; Incorrect operation of your inverter may result in damage and; 10v AC ELECTRICAL DEvICE ExAMPLE RUN-TIME CHART; Appliance Type; Computer Printer, Medium Power Tools, Blenders; Estimated run-times. Actual time may vary. Times are based on

• 10 • POwERINg A 110v AC DEvICE 16. To operate a 110V AC device:Open the protective cover of the AC power outlet on the front panel of the 16.1 Portable Power 1150.Plug the 110V AC device into the AC power outlet, and place the Inverter/ 16.2 Compressor Switch in the INVERTER position. If the devic...

Page 14 - and the JUMP START ON/OFF switch in the OFF position when not using; Replacing the built-in light; Test the light by switching the light on and off.; Customer Technical Assistance

• 11 • STORAgE AND MAINTENANCE 18. IMPORTANT: CHARgE IMMEDIATELY AfTER PURCHASE • KEEP fULLY CHARgED. • Charge the 1150 internal battery immediately upon purchase, every 30 days and after every use.All batteries are affected by temperature. The ideal storage temperature is between 40 and 70 degrees ...

Page 15 - Inflator Accessory Kit:

• 12 • SPECIfICATIONS 19. Internal Battery Type DieHard Maintenance-free AGM Lead-acid Nominal Voltage 12v DC Capacity 22 Ah DC Power Outlet (Max. Continuous Load) 15A per outlet Built-in Light Bulb (Replaceable) 5w/12v DC (Base type BA9S) Jumper Cables 4-gauge AWG, 24 Inches Dimensions (H x W x D) ...