Sears 200.7123- Manuals

Page 2 - Table Of Contents; Warranty

Table Of Contents Warranty..........................................................................1 Important Safety Instructions........................................... 2 Parts................................................................................ 3 Before Using Your Battery Charger.....

Page 3 - Important Safety Instructions; Help us help you

Important Safety Instructions - SAVE THESE INSTRUCTIONS - ^WARNING To reduce the risk of explosion, explosive gases, or injury while using your battery charger, follow the precautions iisted below: Read all instructions and cautions printed on the battery charger, battery, and vehicle or equipment u...

Page 4 - Parts; Wiring Diagram

Parts This section shows an illustration of your battery charger. Use it to become familiar with where all the parts are located, and what they look like. fterriacem ent P arts y at D faH ard 71230 ham D escription P art N um ber 1. Handle 3599000286 2. Negative (BLK) Cable w/Clamps 3899000396 3. Po...

Page 5 - Before Using Your Battery Charger; Assembling your charger

Before Using Your Battery Charger It is important to prepare your charger for use. This section will tell you how to assemble the charger, ground and connect the power cord, and prepare to charge a battery. Assembling your charger it is important to fully assemble your charger before use. Follow the...

Page 6 - Plugging it in

Tap the other axle cap onto the opposite end of the axle and place the axle assembly onto the bottom of the charger. Place one end of the bracket into slot, then place the axle assembly under each bracket. Fasten the other side of the brackets using the two 10-32 screws provided. To attach the handl...

Page 7 - Using an extension cord; Preparing your battery to be charged

A TEMPORARY adapter may be used to connect the charger to a two-pole outlet if a properly grounded outlet is not available. Use the adapter ONLY until a property grounded outlet can be installed by a qualified electrician. A WARNING: Improper adapter con nection can result in electrical shock. Befo...

Page 8 - Using Your Battery Charger; Setting the controls

Using Your Battery Charger To obtain the best results from your battery charger, you must know how to use it properly. This section tells how to set the controls and how to charge a battery in and out of the vehicle. Setting the controls All the controls for your charger are located on the front of ...

Page 9 - Charging Your Battery

Charging Your Battery Charging your battery in the vehicle: 1. Arrange the power cord and charging leads carefully in order to avoid damage that could be caused by the hood, door, or moving engine parts. 2. Keep clear of the fan blades, belts, pulleys, and other parts that can cause injury. 3. Check...

Page 11 - Calculating charge times

Calculating charge times The Chart Method Use the following table to more accurately determine the time it will take to bring a battery to full charge. First, identify where your battery fits into the chart. • Small batteries — motorcycies, garden tractors, etc. — are usually rated in Ampere Hours (...

Page 12 - Using the engine start feature; Maintenance and care

Using the engine start feature Your battery charger can be used to jump-start your car if the battery is low. Follow these instructions on how to use the engine start feature. 1. Set the right-hand OUTPUT SELECTOR switch to the OFF position. Then follow the instructions for connecting the charger to...

Page 13 - Troubleshooting

Troubleshooting Performance problems often result from little things that you can fix yourself. Please read through this table for a possible solution if a problem occurs. PROBLEM POSSIBLE CAUSE SOLUTION/REASONS No reading on the ammeter. Clamps are not making a good connection. 2 -amp charge rate i...