Sears 134542000- Manuals

2 Diagnostic Test: The diagnostic test is performed by using the Program Knob. To START THE TEST: • On non-digital display models, turn the Program Knob to start position, Drain/Spin. • On digital display models, turn the Program Knob to start position, Touch Up. (NOTE: If the model has a timer dial...

3 Error code chart Error code Fault condition Check E11 Fill time too long. Refer to test (1). E13 Water leak in tub or air leak in air bell. Refer to test (2). E14 Reed switch. Refer to test (3). E21 Water not pumping out fast enough. Refer to test (4). E23 Drain pump relay on control board failed....

4 Test Test Check Correction Test 1: Test 2: Test 3: Test 4: Test 5: Yes. Go to step (4).No. Go to step (2)No. Turn water faucets on.Yes. Go to step (3).No. Have customer correct pressureproblem.Yes. Check for kinked or blockedincoming water hoses, cleanthe incoming water screens. Ifproblem still re...