Page 2 - WARNING; This manual covers the operating instructions
FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN SERIOUS INJURY. * Keep all safety shields in place.* Before performing any maintenance or service, stop the machine and remove the spark plug wire.* If a mechanism becomes clogged, stop the engine before cleaning.* Keep hands, feet and clothin...
Page 3 - TABLE OF CONTENTS; SUBJECT
® TABLE OF CONTENTS I SUBJECT PAGE Introduction..............................................................................................................1 Safety and Operating Instructions....................................................................... 1 Assembly Instructions................
Page 4 - INTRODUCTION
1 INTRODUCTION This manual has been prepared to provide theinformation you need to correctly assemble,operate and maintain this attachment. Read itcarefully and keep it for future reference. Shouldyou ever need repair parts or service, contact yourauthorized Scag Service Dealer. Any reference made i...
Page 5 - ASSEMBLY INSTRUCTIONS
2 ASSEMBLY INSTRUCTIONS -Note- Before assembling and connecting thisaccessory to your machine, turn the engineoff, remove the key, and remove the sparkplug wire from the engine. 1. Remove all crating and packing materials. Lay out the mounting hardware according tothe “where used” list on page 5. 2....
Page 6 - Figure 1; Bolt one end of a wheel tie rod above the; Figure 2
3 13. Bolt one end of the other wheel tie rod below the lever on the right wheel spindle.Place a 1/2" ball joint spacer between the balljoint and wheel spindle lever. Secure using a1/2-13 x 2" bolt and a 1/2-13 elastic stopnut. (See figure 2) 14. Place the other end of the tie rod coming fro...
Page 7 - Figure 3
4 21. Mount the seat onto the seat plate. Place the (4) four 3/8" flat washers between the seatand plate. Secure using (4) four 5/16-18 x 3/4" bolts and (4) four 5/16" lock washers. 22. Mount the seat and seat plate to the seat spring using (2) two 3/8-16 x 1" bolts and(2) two 3/8...
Page 8 - Where Used List
5 04001-0804001-1904001-3204001-2204001-8904001-7204001-90 04040-1104041-1104041-1404042-05 04030-0304030-04 04020-0804020-1504021-09 04021-0704021-11 04050-08 04062-01 4232231 2444 42 335 42 2 1 Hex HD Bolt, 5/16-18 x 3/4"Hex HD Bolt, 3/8-16 x 1"Hex HD Bolt, 3/8-16 x 1-1/4"Hex HD Bolt, ...
Page 12 - PRINTED IN USA
PART NO. 03029 PRINTED 6/98 PRINTED IN USA © 1998SCAG POWER EQUIPMENTDIVISION OF METALCRAFT OF MAYVILLE, INC