Page 2 - Features and Design
2 ◆ Functionally Rich This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. ◆ Auto Lamp Selection System The projector is equipped with 2 projection lamps and automatically switches the act...
Page 3 - Trademarks; Table of Contents
3 Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . 2Table of Contents . . . . . . . . . . . . . . . . . . 3To the Owner . . . . . . . . . . . . . . . . . . . ...
Page 4 - RISK OF ELECTRIC SHOCK; Safety Precaution; CAUTION ON HANGING FROM THE CEILING; To the Owner; CAUTION
4 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) . NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT....
Page 5 - Safety Instructions
5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow a...
Page 6 - Air Circulation; Top Control
6 Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions...
Page 7 - CAUTION ON CEILING MOUNTING
7 Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. Installing the Project...
Page 8 - Cautions in Handling the Projector; Moving the Projector
8 Use the hand grip when moving the projector. Replace the lens cap and retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When the projector is not in use for an extended period, put it into a suitable case to protect the projector. CAUTION IN CARRyING OR TRANSPORT...
Page 9 - AC Power Cord for the United Kingdom:; WARNING: THIS APPARATUS MUST BE EARTHED .; AC Power Cord for the United States and Canada:; AC Power Cord Requirement; Federal Communications Commission Notice; Compliance
9 AC Power Cord for the United Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . If the fuse...
Page 10 - Part Names and Functions
10 !1 Infrared Remote Receiver (Back) !2 Lamp Cover !3 Filter Cover !4 Exhaust Vent !5 Security Chain Hook !6 Air Intake Vent !7 Hand Grip Bottom Back q Lens Release Button w Infrared Remote Receiver (Top&Front) e Terminals and Connectors r Top Controls and Indicators t Lens Cover y Speaker u Pr...
Page 11 - Side Terminal; AUDIO 2 jACK
11 Side Terminal q w e r t i u y AUDIO 2 jACK Connect the audio output (stereo) signal from a computer or video equipment connected to i to this jack (p.22). t AUDIO 1 jACK Connect the audio output (stereo) signal from a computer or video equipment connected to q or w to this jack (p.22). u AUDIO 3 ...
Page 12 - CONTROL PORT CONNECTOR; VIDEO INPUT jACK
12 !1 R/C jACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied). Side Terminal !3 CONTROL PORT CONNECTOR When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control c...
Page 14 - Remote Control
14 q STAND-By button Turn the projector off (p.25). t ON button Turn the projector on (p.24). y INPUT 1 – 3 buttons Select an input source (INPUT 1 – INPUT 3) (pp.34– 35). u AUTO PC button Automatically adjusts the computer image to its optimum setting (pp.30, 38). i FREEZE button Freeze the picture...
Page 16 - Remote Control Receivers and Operating Range; Wired Remote Control
16 To ensure safe operation, please observe the following precautions : l Use two (2) AAA or LR03 type alkaline batteries. l Always replace batteries in sets. l Do not use a new battery with a used battery. l Avoid contact with water or liquid. l Do not expose the remote control to moisture or heat....
Page 17 - Remote Control Code
17 The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code ...
Page 18 - Installation; Adjustable Feet
18 Installation Projection angle can be adjusted up to 3.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise. To lower the projector or to retract the adjustable feet, rotate the both feet ...
Page 19 - Attaching the lens to the projector; Lens Installation; Removing the lens
19 When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector. Remove t...
Page 20 - Connecting to a Computer (Digital and Analog RGB); Cables used for connection; • Serial Control Cable *
20 Connecting to a Computer (Digital and Analog RGB) Cables used for connection )( * =Cables are not supplied with this projector.) • VGA Cable (Mini D-sub 15 pin) (One cable is supplied)* • HDMI-DVI Cable * • Serial Control Cable * • BNC Cable * • USB Cable * HDMI-DVI cable USB cable USB port USB U...
Page 21 - • BNC Cable
21 Connecting to Video Equipment (Video, S-video, Component, HDMI and RGB Scart) Cables used for connection • Video Cable (RCA x 1) • VGA-Scart Cable • S-VIDEO Cable • BNC Cable • HDMI Cable (Cables are not supplied with the projector.) VIDEO S-VIDEO S-video cable Composite Video Output S-video Outp...
Page 22 - Connecting for Audio Signal; MONITOR OUT and AUDIO OUT Specifications
22 Connecting for Audio Signal Cables used for connection • Audio Cable (Mini Plug [stereo] x 2) • Audio Cable (RCA x 2) (Cables are not supplied with the projector.) External Audio Equipment Audio cable (stereo) Audio Input Audio Output AUDIO OUT (stereo) Audio cable (RCA) AUDIO IN Unplug the power...
Page 23 - Connecting the AC Power Cord; Unplug the AC power cord when the projector is not
23 NOTE ON THE POWER CORD AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer. To power cord co...
Page 24 - Basic Operation; Selected Input Source and Lamp Control; PIN Code Input Dialog Box; Turning On the Projector; Enter a PIN code; When using top control
24 Basic Operation Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red. Press the ON/STAND-BY button on the top control or the ON button on the remote control. The POWER indicator turns green and the cooling fans start to operate. The preparation display appears o...
Page 25 - Turning Off the Projector
25 Press the ON/STAND-BY button on the top control or the STAND-BY button on the remote control, and “Power off?” appears on the screen. Press the ON/STAND-BY button or the STAND-BY button on the remote control again to turn off the projector. The POWER indicator starts to blink red after 3 seconds....
Page 26 - How to Operate the On-Screen Menu; • The selected item is not active until the SELECT
26 Top Control Menu bar Pointer (red frame ) Menu icon Item data Press the Point 7 8 buttons to adjust the value. SELECT button Pointer (red frame ) Press the Point ed buttons to move the pointer. Item How to Operate the On-Screen Menu MENU button SELECT button POINT buttons On-Screen Menu Quit Exit...
Page 27 - Menu Bar; For detailed functions of each menu, see “Menu Tree” on pages 71-72.
27 Menu Bar System Select a computer or video system mode (pp.36, 37). Image Adjust Adjust the picture image (pp.42–44).– Contrast– Brightness– <Color>– <Tint>– Color temp.– White balance (R/G/B)– Sharpness– Gamma– <Noise reduction>– <Progressive>– Reset– Store– Quit Setting ...
Page 28 - Operating with Projector Control; Lens Shift Adjustment; • The arrow disappears at the maximum lens shift; Zoom Adjustment; Focus Adjustment; Lens Operation; ZOOM; Shutter Function; • The SHUTTER button on the top control and the
28 The following lens operation can be made with the Lens button on the top control. Press the Lens button to enter each lens operation mode. The selected adjustment display appears on the screen. Zoom ➜ Focus ➜ Lens Shift ➜ • • • • • Operating with Projector Control Display “Lens shift” on the scre...
Page 29 - Volume; Direct Operation; Sound Adjustment
29 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Sound Menu icon. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Pre...
Page 30 - Operating with Remote Control; • See the next page for the description
30 Remote Control Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the FREEZE button on the remote control to freeze...
Page 31 - KEySTONE button; SHUTTER button
31 Press the P-TIMER button on the remote control. The P-Timer display “00:00” appears on the screen and the countdown starts (00:00–59:59). To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again. P-TIMER button P-Timer display ✔ Note: • See t...
Page 32 - Spotlight; Pointer Function; Pointer; II; Laser Pointer Function
32 Spotlight Pointer Function Pointer ✔ Note: • You can choose the size of Spotlight (Large/Middle/ Small) and the pattern of Pointer (Arrow/Finger/Dot) in the Setting Menu. See “Pointer” on page 55. This remote control emits a laser beam from the laser light window. Press the LASER button to activa...
Page 33 - Wireless Mouse Operation
33 Move the pointer on the screen with this button. PRESENTATION POINTER button R-CLICK button L-CLICK button Act as right (click) mouse button while the projector and a computer are connected with a USB cable. Act as left (click) mouse button while the projector and a computer are connected with a ...
Page 34 - Input; Remote Control Operation; Input Selection; Remote Control button operation
34 Remote Control INPUT buttons Top Control Input Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. The input source appears on the screen as you press each button. Select the connected input source. Remote Control Operation INPUT button Press the INPUT button on the top control....
Page 35 - Menu Operation; HDMI; INPUT 2; Video; INPUT 3; Input Source Selection; Input Menu
35 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon. 1 Use the Point ed buttons to move the red arrow pointer to the desired input and then press the SELECT button. The signal format menu appears. 2 Use the Point ed b...
Page 36 - Video System Selection; Component; Auto; • The AV System Menu cannot be selected when
36 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. 1 Video System Selection AV System Menu (Video or S-video) AV System Menu (Component) Use the Point ed buttons to move the red arrow pointer to the desired syst...
Page 37 - Computer System Selection; Selecting Computer System Manually; PC System Menu; Computer Adjustment
37 The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon Selected system is displayed. Systems in this dialog box can be selected. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC...
Page 38 - PC Adjust Menu; To store adjustment parameters; • Fine sync, Total dots, Horizontal and Vertical position; Auto PC Adjustment
38 Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Move the red frame pointer to Auto PC Adj. and press the SELECT button. “Please wait...” appears while the Auto PC adjustment is in process. PC Adj...
Page 39 - Manual PC Adjustment
39 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Po...
Page 40 - • PC Adjust Menu can0not be selected when Input 1; To clear the adjusted data
40 Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area H Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Display area V Reset Store Exit the PC Adjust Menu. Quit To store the adjusted data, select Store and then press t...
Page 41 - Image Menu; Standard; Dynamic; Image Level Selection
41 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the SELECT button. Move the red frame pointer to the desired im...
Page 42 - Contrast; • When the White balance Red, Green, or Blue is; Color; Image Adjust Menu; Image Adjustment
42 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the...
Page 43 - • Progressive cannot be selected when 480p, 575p, or; Progressive
43 Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). Sharpness ✔ Notes: • Progressive cannot...
Page 44 - Reset
44 To store the adjusted data, select Store and press the SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the Image Level Selection on ...
Page 45 - Screen Menu; Keystone; Ceiling; Ceiling
45 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 1 Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. 2 Screen Adjustment Move the red frame pointer t...
Page 46 - Screen Size Adjustment (Computer Signals); Custom; • When no signal is detected, “Normal” is
46 Provide the image to fit the screen size. Normal True Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows w...
Page 47 - Digital zoom –; For zooming in and out the images
47 Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +”appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. You can also enter the Digital zoom + mode...
Page 48 - Normal; Zoom
48 Screen Size Adjustment (Video, Component Signals) Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 1 Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button...
Page 49 - Language; Setting; Logo select; Logo; • When “On” is selected in the Logo PIN code lock
49 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Kore...
Page 50 - Capture; Logo PIN code lock
50 Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select [Yes] to capture the projected image. After capturing the projected image, go t...
Page 51 - Change the Logo PIN code; Change the Logo PIN code lock setting; Enter a Logo PIN code
51 Enter a Logo PIN code After a correct Logo PIN code is entered, the following dialog box appears. Change the Logo PIN code Logo PIN code can be changed to your desired four-digit number. Press the Point d button to select “Logo PIN code change” and then press the SELECT button. The New Logo PIN c...
Page 52 - Picture in Picture; Background
52 Picture in Picture This function is used to project two videos simultaneously by placing a separate small sub screen within the main screen. Use the Point ed buttons to move the red frame pointer to Picture in Picture and then press the SELECT button to display a dialog box. Use the Point 7 8 but...
Page 53 - Lamp mode; When selecting Lamp1/2 mode; Timer setting
53 Setting This Projector is equipped with 2 Projection Lamps. This function allows you to choose how to use the lamp as follows. Lamp1............ Always use Lamp 1. Lamp2 ........... Always use Lamp 2. Lamp1/2......... Automatically switch the active lamp from one lamp to the other . ✔ Note: • Whe...
Page 54 - • A lamp is switched to the lamp which; You can replace the filter with this function. Press the
54 Setting Lamp control This function allows you to change brightness of the screen. Auto 1 .........The brightness according to the input signal (between Normal and Eco mode). Auto 2 ......... The brightness according to the input signal (between High and Eco mode). High ............ Brighter than ...
Page 55 - Remote control; To change the code for the projector
55 Setting Pointer You can emphasize a part of the projected image with this function. Use the Point ed buttons to choose either Spotlight or Pointer and press the SELECT button. Then use the Point 7 8 buttons to select a size of the Spotlight (Large, Middle, or Small) or a pattern of the Pointer (A...
Page 56 - Display; Standby mode; • When selecting “Network”, the cooling; Power management; Power management
56 Setting Display This function decides whether to display On-Screen Displays. On ............................ Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown Off .........
Page 57 - On start; • Be sure to turn off the projector properly (see “Turning; Slant; Slant setting
57 Setting Press the SELECT button at Power management and this dialog box appears. Use the Point 7 8 buttons to choose one of the three options. Press the Point d button to select the timer, and then use the Point 7 8 buttons to set timer. Power management Select one of the following options: Ready...
Page 58 - Shutter function is available to block out light to the
58 Setting Shutter Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Prohibits the shutter operation from the remote control and the projector's top control. Remote control ... Selecting "On" prohibits the shutter operati...
Page 59 - Key lock; Security (Key lock and PIN code lock settings)
59 Key lock Select Key lock. Use the Point ed buttons to choose one of the options and select [Yes] to activate it. Security (Key lock and PIN code lock settings) This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation. Key lock This fu...
Page 60 - PIN code lock; Change the PIN code lock setting; When using remote control
60 Setting Change the PIN code lock setting Use the Point 7 8 buttons to switch between the options. Enter a PIN code PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off ........... Unlocked. On1 ...
Page 61 - Change the PIN code; Test pattern; • When the Factory default function is executed, all
61 The PIN code can be changed to your desired four-digit number. Press the Point d buttons to select “PIN code change” and press the SELECT button. The New PIN code input dialog box appears. Set a new PIN code. Change the PIN code Change the PIN code CAUTION:WHEN yOU HAVE CHANGED THE PIN CODE, WRIT...
Page 62 - This function returns all setting values except for the user; Quit; Factory default
62 Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings. Exit the Setting Menu. Quit Select Factory default and this box appears. Select [Yes], and the next box appears. ...
Page 63 - Maintenance and Care; Filter Instructions
63 Maintenance and Care Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of ...
Page 64 - Replacing the Filter Cartridge; RECOMMENDATION; ORDER REPLACEMENT FILTER CARTRIDGE
64 Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 12 Slide and open the Filter cover. (See the right figure.) 3 Put the new one back into the position until it clicks and...
Page 65 - Be sure to reset the Scroll counter after replacing the filter; Resetting the Scroll Counter; Scroll counter; Be sure to reset the Filter counter after replacing the filter; Resetting the Filter Counter
65 Be sure to reset the Scroll counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. Use the Point ed buttons to move the red frame pointer to Filter counter and then press ...
Page 66 - Auto Lamp Selection System; Replace Indicators; yellow Lamp; Lamp Mode Changeover
66 Auto Lamp Selection System This Projector is equipped with 2 Projection Lamps. The Lamp Management Function detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLACE indicators. This function also automatically controls the Lamp Mode when any of lamps reaches the recom...
Page 67 - Lamp Replacement; • The Lamp replacement icon will not; • After lamp replacement, make sure to check the Lamp
67 When the total lighting time of a Projection Lamp reaches the recommended total hours of use, the Lamp replacement icon appears on the screen and LAMP 1 / 2 REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP 1 / 2 REPLACE indicator should light is ...
Page 68 - LAMP HANDLING PRECAUTIONS; ORDER REPLACEMENT LAMP
68 This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. l Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp...
Page 69 - Warning Indicators; • The WARNING TEMP. indicator continues to blink; Then check the matters below:; The projector is shut down and the WARNING TEMP.
69 The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING indicators and the POWER indicator to take proper maintenance. Warning Indicators The projector is shut down and the WARNING TEMP. indicator is blinking red. When the temperature ins...
Page 71 - Troubleshooting; Appendix
71 Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages 20–22. – Make sure all equipment is connected to AC outlet and the power is turned on....
Page 74 - Menu Tree; Image; • The Menu display varies depending on the input
74 Menu Tree Dynamic RealCinema*Image 1Image 2Image 3 Image Input Go to System (3) Go to System (3) Video Go to System (1) S-video Standard Quit Input 1 Go to System (3) Video Go to System (1) Input 2 RGB Go to System (2) Component Image 4 RGB (PC analog) RGB (Scart) HDMI Quit Quit SySTEM (3) SySTEM...
Page 75 - Sound
75 InputH-sync freq.V-sync freq. PIN code lock Information Key lock ScreenLanguage Power management Security Remote control Lamp modeLamp controlLamp 1Lamp 2Filter counter Shutter management Remote control ( ) Min Projector SERIAL NO. Auto PC adj. Total dotsHorizontalVertical Display area HDisplay a...
Page 77 - Indicators and Projector Condition; The projector is operating normally .; Indicators; Projector Condition
77 Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally . • • • on • • • off • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • blinking slow (approx. 2 seconds ON, 2 seconds OFF) • • • blinking fast (approx...
Page 78 - The projector is detecting abnormal condition .
78 The projector is detecting abnormal condition . Indicators Projector Condition POWER green / red WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. yellow The temperature inside the projector is elevated close to the abnormally high level. The temperature inside the projector is a...
Page 79 - The shutter is out of control. (The projector is in the
79 The projector is detecting abnormal condition . Indicators Projector Condition POWER green / red WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. yellow If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the...
Page 80 - Compatible Computer Specifications; below and less than 140 MHz of Dot Clock.
80 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 140 MHz of Dot Clock. Appendix ON-SCREEN DISPLAy RESOLUTION H-Freq . (kHz) V-Freq . (Hz) VGA 1 640x480 31.470 59.880 VGA 2 720x400 31.470 ...
Page 82 - List of Picture in Picture; : Picture in Picture combinations are enabled; Monitor Output at the PIP mode:
82 Appendix List of Picture in Picture o : Picture in Picture combinations are enabled - : Picture in Picture combinations are disabled ✔ Note: • When the input signal(s) is/are incompatible, X mark will be displayed on the Main/Sub picture. • Depending on the frequency or signal type of PC/AV input...
Page 83 - Technical Specifications
83 Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 21.66” x 6.89” x. 17.76” (451.0 mm x 175.0 mm x 550.1 mm) Net Weight 32.4 lbs (14.7 kg) Feet Adjustment 0˚ to 3.5˚ Panel Resolution LCD Panel System 0.95” TFT Active Matrix type, 3 panels P...
Page 84 - Optional Parts
84 Model No. Long Zoom Lens : LNS-T11 Short Fixed Lens : LNS-W11 Standard Lens : LNS-S11 Long Zoom Lens : LNS-T10 Short Zoom Lens : LNS-W10 Pj-Net Organizer Plus II : POA-PN03A Pj-Net Organizer Plus IIC : POA-PN03C VGA-Cable(10 m) : KA-MC-DB10 Remote Control Cable : POA-CA-RC30 The parts listed belo...
Page 85 - Accessories; conformance with PJLink Standard Class 1.; PJ Link Notice
85 Accessories Owner’s Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable USB Cable Lens Mount Cover PIN Code Label Lens Antitheft Screw * * Contact the dealer where you purchased the projector or the service center about the Lens Antitheft Screw. This project...
Page 86 - Configurations of Terminals
86 Terminal : D-sub 9 pin CONTROL PORT CONNECTOR Vcc - Data + Data Ground 1234 2 3 4 1 INPUT 1/ANALOG OUT Terminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of Terminals USB CONNECTOR (Series B) Appendix ----- R X D T X D ----- SG ----- RTSCTS Serial 12345678...
Page 87 - PIN Code Number Memo; Put the label below (supplied) on in a prominent place of the; Logo PIN Code Lock No .
87 Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four-dig...
Page 88 - Dimensions
88 Dimensions 3.94 (100.0) 3.94 (100.0) 10.85 (275.5) 3.15 (80.0) 5.55 (141.0) 5.55 (141.0) 6.89 (175.0) 3.70 (94.0) (PANEL CENTER) 3.44 (87.3) 17.76 (451.0) 15.59 (396.0) 21.66 (550.1) 3.5 ° MAX Screw Holes for Ceiling MountScrew: M6Depth: 0.393 (10.0) Unit: inch (mm) Appendix
Sanyo DP50E44
User Manual
Sanyo AVM-3260G
User Manual
Sanyo DS25230
User Manual
Sanyo VPC-TH1
User Manual
Sanyo VPC-HD1010
User Manual
Sanyo VPC-GH2
User Manual
Sanyo VPC-FH1
User Manual
Sanyo VPC-CS1
User Manual
Sanyo VPC-HD2000
User Manual
Sanyo DP42545
Manual
Sanyo CLT-2419
Manual
Sanyo VCC-XZ200P
Manual
Sanyo DVD-L70
Manual
Sanyo DS13310, DS19310
Manual