Sanyo VA-SW80LITE - Manuals

4 English NETWORK CONFIGURATION SYSTEM REQUIREMENTS The following environment is required for the operation of this system. *1 If using at a resolution of 1024x768, you will need to select "Auto-hide the taskbar" in the Taskbar Properties menu.*2 Latest driver with 100% DirectX 8.1 compatibi...

English 5 TCP/IP SETTINGS TCP/IP (Transmission Control Protocol/Internet Protocol) is a standard protocol that is used for the Internet and intranets. When using the software on a network, you should first change the TCP/IP settings as required in accordance with the operating systems (OS) of the va...

6 English INSTALLING THE SOFTWARE Install the DVR Utility Software to the computer that is connected to the network. The following procedure will install the hardware key driver and the MP2 viewer at the same time. 1 Insert the DVR Utility Software CD into the CD-ROM drive of the computer.The “Welco...

English 9 LOGGING IN/LOGGING OFF/DISPLAY LANGUAGE SETTING ■ Logging In 1 Hardware key installationInsert the accessory hardware key into the USB port of the computer. If the hardware key is not installed, the software will operate as the Lite version, and some functions will be disabled. (P.8, 11) 2...

10 English LOGGING IN/LOGGING OFF/DISPLAY LANGUAGE SETTING ■ Logging Off Click on the toolbar to close the connection. Make sure that you carry out this disconnect operation when exiting the software and closing the program window. ■ Display Language Setting This software uses English as its default...

English 11 BASIC WINDOW FLOWCHART When the software is started and a user has logged in, the main window for live image monitoring and recording/playback is displayed. The software lets you display a variety of operating windows and setting windows starting from the main window, as shown in the flow...

English 13 FUNCTIONS OF EACH MAIN WINDOW (MONITORING, RECORDING AND PLAYBACK WINDOW) COMPONENT ● BROADCAST (P.41) This displays the “BROADCAST” window. This window is used for issuing batches of basic commands such as commands to start or stop recording to the DVRs that are connected to the system. ...

14 English BASIC NETWORK SETTINGS (User Level: ID4) In order to use a computer to control DVRs that are on the network, you first need to set some basic network-related system conditions. Click the icons on the toolbar in the main window to display the respective setting windows, click on the tab in...

English 17 OPERATION OF SETTING BUTTONS The following operation buttons are displayed in the various setting windows such as the initial setting and menu setting windows. The basic functions of each button are the same for each window. Button Button function and related operations Table setting Tab ...

20 English INITIAL SETUP (SETUP WINDOW) (User Level: ID4) ■ REGISTER DVR tab (Operation only possible at master computer) The operations in this tab are limited to the master computer only. They let you register and delete DVRs that are connected to the monitoring network. Slave computers obtain the...

English 21 INITIAL SETUP (SETUP WINDOW) (User Level: ID4) 9 DVR attribute group entry box (GROUP)When registering a new DVR, type the attribute group (such as setup location) for the DVR in this box using 10 alphanumeric characters or less. F SET buttonWhen registering a new DVR, click this button a...

22 English INITIAL SETUP (SETUP WINDOW) (User Level: ID4) 1 Select “MANUAL” in the “TCP/IP ADDR.” box.The manual setting mode for addresses will be enabled. 2 Manually set “IP ADDRESS” using the “NETWORK SET” menu for the DVR.Enter a number between 001 and 250 for the last three digits of the addres...

English 23 CLOCK AND SYSTEM UPDATE SETTINGS (User Level: ID4) The “CLOCK & SYSTEM” window contains four tabs which can be used for tasks such as setting the time, updating the firmware and displaying system-related information. Click on the menu bar to display the setting window and then click a...

24 English CLOCK AND SYSTEM UPDATE SETTINGS (User Level: ID4) ■ SYSTEM UPDATE tab Use this tab window to specify a filename to use for updating DVR firmware. 1 Click the “SYSTEM UPDATE” tab index.The “SYSTEM UPDATE” tab window will be displayed. 2 Select a DVR in the “TARGET” window.The display colo...

30 English MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ REC MODE SET tab Click on the DVR to be set in the “TARGET” window to select it. The display color for the selected DVR will change to blue. 1 PICTURE QUALITY (Default setting: HIGH)This sets the quality of the images that are recorded by th...

English 33 MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ TIMER REC SET tab This sets the timer recording conditions for DVRs. Click on the DVR to be set in the “TARGET” window to select it. The display color for the selected DVR will change to blue. 1 WEEKSelect the day for timer recording to be c...

34 English MENU SETTINGS (MENU WINDOW) (User Level: ID4) 1 Select “MON” from the “WEEK” drop-down list box. 2 Use the [START] spin button to select [10:30]. 3 Use the [STOP] spin button to select [15:30]. 4 Select “ON” in the “SET” box. 5 After making the above settings, click [APPLY] and then click...

English 35 MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ HOLIDAY SET tab This window is used to specify particular days as holidays. The timer recording operation on specified holidays will be the same as that for Sundays. A holiday setting can be made for days such as festival and national holida...

36 English MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ DISPLAY/BUZZER SET tab This is used to set the display information and buzzer operation for the monitor connected to the DVR. Click on the DVR to be set in the “TARGET” window to select it. The display color for the selected DVR will change ...

38 English MENU SETTINGS (MENU WINDOW) (User Level: ID4) ■ MONITOR SET tab This sets the window settings for the monitor that is connected to a DVR. Select the DVR to be set from the “TARGET” window. The selected DVR will change to blue. <MONITOR SET> 1 SEQUENCE (Default setting: 1)Use the spi...

42 English BROADCAST TRANSMISSION SETTINGS (BROADCAST WINDOW) (User Level: ID4) 4 CLOCK SET (User Level: ID4)This sets the date and time for all connected DVRs to the specified time. 1 Use the spin buttons to set the date (DATE [MM/DD/YY]) and time (TIME [hh/mm/ss]). 2 Click . 5 SYSTEM UPDATEThis br...

English 43 IMAGE DISPLAY WINDOWS This system allows monitored live images and playback images to be viewed in the following three types of screen. ■ Display Screen Type 1 QUAD screenThis is the main window for this system. This shows all of the camera images (channel 1 to channel 4) from all cameras...

46 English MONITORING LIVE IMAGES (User Level: ID1 or higher) Live images from monitoring cameras that are connected to the network can be viewed by specifying a DVR. In addition, the display window can also be selected as desired. ■ Monitoring with QUAD Screens Images from a single DVR (comprising ...

48 English MONITORING LIVE IMAGES (User Level: ID1 or higher) ■ Disconnecting DVRs To disconnect a DVR, click in the main window. When you do this, communication with the DVR that is being monitored (or the DVR that has been specified by clicking a title bar when monitoring in a multi screen) will s...

English 49 RECORDING IMAGES Images that are being monitored can be recorded onto the hard disk inside the DVR. There are three recording modes that are available: “Normal recording” involves using manual operations to record live images that are being monitored; “Timer recording” lets you specify a ...

English 53 PLAYING BACK RECORDED IMAGES (User Level: ID1 or higher) When playing back recorded images, click the playback button in live mode. Playback of images from the specified DVR will start. ■ Playing Back Recorded Images 1 Switches to live image mode.Live images from the DVR to be played back...

54 English PLAYING BACK RECORDED IMAGES (User Level: ID1 or higher) ■ Functions of Each Playback Control Panel Component (Playback) button: This button is used to play back recorded images at normal speed. (Stop) button: This button is used to stop playback and to switch back to live mode. • You can...

English 55 SEARCHING (User Level: ID2 or higher) Normal recording images, timer recording images and alarm recording images that have been recorded by a DVR can be searched through using the computer and played back. The following three search modes are available. ● Time/date search: (P.55) This let...

English 59 SAVING STILL IMAGES (User Level: ID2 or higher) Still images that are displayed during playback can be saved on the computer’s hard disk in JPEG format. 1 Playing back images in the main windowSelect the DVR in the “TARGET” window and then click the play button in the playback control pan...

60 English DOWNLOAD (User Level: ID2/3 or higher) Recorded images can be downloaded to the computer or some other device. Download operation permissions for user levels 2 and 3 will be set to the default settings. ■ Specifying the Image Range Follow the procedure below to specify the range of images...

English 61 DOWNLOAD (User Level: ID2/3 or higher) ■ Functions of Each Download Window Element <Display area> 1 Preview window This shows thumbnail images of the still images at the start point (left) and end point (right) for the specified image files. 2 Log window This shows the results of do...

66 English TIMER DOWNLOAD (User Level: ID2/3 or higher) A timer reservation can be used to automatically download images recorded by a DVR. If you specify the download range (starting point and ending point) for each DVR, the recorded images from the specified range will be downloaded automatically ...

74 English TAMPER DETECTION (User Level: ID2 higher) This function lets you check whether images that have been downloaded from a DVR to an external storage device are the original downloaded images, or whether they have been modified or added to in some way. Click on in the toolbar to display the “...

English 75 MP2 Viewer The MP2 Viewer is a special playback software application that is used for the DSR-M804/800 series. It can be used to play back image data in MPEG2 format that has been saved from the DVR onto a recording medium such as and computer’s hard disk drive, a CompactFlash card or a C...

78 English MP2 Viewer ■ Opening Files After MP2 Viewer opens, follow the procedure below to open the image file to be played back. 1 Click on the toolbar. Alternatively, select [Open(O)] from the File menu. 2 Select and open the image file.Select the file in the Open dialog box and then click [Open]...

English 79 MP2 Viewer ■ Saves a Still Image Still image data can be saved in JPEG format onto a different storage medium. 1 Displays a still image.Click while playback is in progress. 2 Click on the toolbar. Alternatively, select [Save As(A)] from the File menu. The “Save As” dialog box will be disp...