Sanyo PLC-XF71 - Manuals - manualsarea.com

Page 2 - Features and Design

2 This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid cr ystal display (LCD) technology. ◆ Functionally Rich ◆ Simple Computer Syste...

Page 3 - Trademarks; Table of Contents

3 Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Table of Contents Features and Design . . . . . . . . . . . . . . . . 2Table of Contents . . . . . . . . . . . . . . . . . . 3To The Owner . . . . . . . . . ...

Page 4 - CAUTION: TO R E D U C E T H E R I S K O F E L E C T R I C; RISK OF ELECTRIC SHOCK; CAUTION; CAUTION ON HANGING FROM THE CEILING; To The Owner; Safety Precaution

4 CAUTION: TO R E D U C E T H E R I S K O F E L E C T R I C SHOCK, DO NOT REMOVE COVER (OR BACK) . NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT...

Page 5 - Safety Instructions; NOTE FOR CUSTOMERS IN THE US

5 All the safet y and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow ...

Page 6 - Air Circulation; Top Panel

6 Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions...

Page 7 - Installing the; Positioning Precautions

7 Safety Instructions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. In...

Page 8 - Moving the Projector; CAUTION IN CARRyING OR

8 Moving the Projector CAUTION IN CARRyING OR TRANSPORTING THE PROjECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not transport the projector by courier or any other transport service in an un...

Page 9 - AC Power Cord for the United Kingdom:; wARNING: THIS APPARATUS MUST BE EARTHED .; AC Power Cord for the United States and Canada:; AC Power Cord Requirement; Compliance; Federal Communications Commission Notice; wARNING; which case the user may be required to take adequate measures.; Canadian Radio Interference Regulations

9 AC Power Cord for the United Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . If the fuse...

Page 10 - Front; Hot air is exhausted from the exhaust; Terminals and Connectors; Part Names and Functions; Kensington Security Slot; This slot is for a Kensington lock used

10 u e r t Front o q w y i Back q Lens Mount Cover w Projection Lens (Option) e Indicators r Infrared Remote Receiver (Front) !2 CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. !0 Infrared Remote Receiver (Rear) !1 Exhaust Vent t Adjustable Feet ...

Page 11 - SERIAL PORT IN TERMINAL; RESET button; DVI INPUT TERMINAL

11 Terminals and Connectors r R/C jACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied). e USB CONNECTOR (Series B) USB connector is to used to service the projector. i S-VIDEO INPUT jACK Connect the S-VIDEO output signal f...

Page 12 - Side Control and Indicators; used to expand image in DIGITAL ZOOM mode.; Side Control

12 i FOCUS button Adjust the focus. (p.27) w ZOOM button Zoom in and out the images. (p.27) q ON/STAND-By button Turn the projector on or off. (pp.23,24) o INPUT button Select an input source INPUT 1, INPUT 2, Input 3 or Input 4. (pp.31-33) y AUTO PC ADj . button Automatically adjust the computer im...

Page 13 - Indicators

13 Indicators q w e r t y u e wARNING TEMP . indicator This indicator flashes red when internal projector temperature is too high. (pp.65, 72-74) u LAMP 1 REPLACE indicator Turn orange when the life of the projection lamp1 draws to an end. (p.61, 73) q LAMP Indicator This indicator is dim when the p...

Page 14 - Remote Control; Light the buttons on the remote control for about 10; button

Remote Control Part Names and Functions q t e !0 i !4 r !3 !1 w y u o !7 !2 !8 !9 @0 e LIGHT button Light the buttons on the remote control for about 10 seconds. r MENU button Open or close the On-Screen MENU. (pp.25-26) t POINT ed 7 8 buttons – Select an item or adjust the value in The ON-SCREEN ME...

Page 15 - Remote Control Battery Installation; Remote Control Receivers and Operating Range

Remote Control Battery Installation 1 2 3 Open the battery compartment lid. Install new batteries into the compartment. Replace the compartment lid. Two AA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. To ensure safe operation, ...

Page 16 - Remote Control Code

16 The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code ...

Page 17 - Installation; Lens Installation; This projector is designed to project on a flat projection

17 Installation Lens Installation Before setting up the projector, install Projection Lens on the projector. Before installation, check where the projector is used and prepare a suitable lens. For the specifications of Projection Lens, contact sales dealer where you purchased the projector. - Do not...

Page 18 - Picture Level and Pitch Adjustment; Lens Shift Adjustment; when the lens is shifted to top .

18 Picture Level and Pitch Adjustment Installation ADJUSTABLEFEET REAR ADJUSTABLEFEET (Refer to p.10) Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen.(See page 27) Lens Shift Ad...

Page 19 - Terminals of Projector; Replacement of Terminal

19 Terminals of Projector The projector has two replaceable Interface board slots. The projector's functions can be extended by installing the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your purchasing the projector. For the Optional Interface B...

Page 20 - Connecting to Computer; Terminals of; Unplug the power cords of both the; Cables used for connection; DVI Cable

20 Installation Connecting to Computer VGA Cable Monitor Output Desktop type Laptop type Terminals of the projector Monitor Output DVI Cable BNC Cable ✽ Monitor Output Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for con...

Page 21 - Connecting to Video Equipment

21 Installation Connecting to Video Equipment Video Source (example) Video Cassette Recorder Video Disc Player RGB SCART21-pin Output Y Pb/Cb Pr/Cr Y-Pb/Cb-Pr/Cr Component video output equipment. (such as DVD player or high-definition TV source.) Component Video Output BNCCable Digital Output ( HDCP...

Page 22 - NOTE ON THE POwER CORD; Projector side; For Continental Europe; Connecting the AC Power Cord

22 NOTE ON THE POwER CORD AC power cord must meet the requirements of the country where you use the projector.Confirm the AC plug type with the chart below and proper AC power cord must be used.If the supplied AC power cord does not match your AC outlet, contact your sales dealer. Projector side AC ...

Page 23 - Turning On the Projector; Enter a PIN code; CAUTION ON HANDLING PIN CODE; Basic Operation

23 Turning On the Projector Connect the projector’s AC power cord into an AC outlet and turn on the MAIN ON/OFF Switch. The LAMP indicator lights red and the READY indicator lights green. Press the ON/STAND-BY button on the side control or on the remote control. The LAMP indicator dims red and the c...

Page 24 - Turning Off the Projector

24 Press the ON/STAND-BY button on the side control or on the remote control, and “Power off?” appears on the screen. Press the ON/STAND-BY button on the side control or on the remote control again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After t...

Page 25 - How to Operate the On-Screen Menu

25 Side Control SELECT button How to Operate the On-Screen Menu MENU button SELECT button POINT buttons On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Use the Point 7 8 buttons to...

Page 26 - Menu Bar; For Computer Source

26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 34). Used to select an image level among Standard, Real, and Image 1–10(p. 38). Used to adjust the size of the image. [Normal/True/Wide/ Full screen/Custom/Keystone/Ceili...

Page 27 - Operating with Projector Control; Zoom; POINT buttons; ZOOM button; Auto PC

27 Operating with Projector Control Display “Lens shift” on the screen. Use the Point ed7 8 buttons to position the screen to the desired point without having picture distortion. The screen can be moved up or down to 50 percent, or sideways up to 10 percent from the central axis of the lens shift. L...

Page 28 - Information

28 Basic Operation Information Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFORMATION button to display the information window on the screen. To hide the information window, press the INF...

Page 29 - Operating with Remote Control; POINT

29 Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the FREEZE button on the remote control to freeze the picture on...

Page 30 - KEySTONE button; SHUTTER button

30 KEySTONE button Reduce the upper width with Point e button. Re d u c e t h e l owe r w i d t h with Point d button. Reduce the left part with Point 7 button. Reduce the right part with Point 8 button. • The white arrows indicate that there is no correction. • A red arrow indicates the direction o...

Page 31 - Input; Remote Control Operation; Side Control Operation; Side Control button operation; Input Selection; Remote Control button operation

31 Remote Control INPUT buttons Input Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button on the remote control. It switches to INPUT 1, INPUT 2, INPUT 3 or INPUT 4 as you press the INPUT button. Before using the INPUT button on the remote control, you must select a correct input source by On-Scre...

Page 32 - Menu Operation; Input 1; Computer Input Source Selection; when Selecting the INPUT 1 with DVI/D-sub 15 terminals; INPUT MENU

32 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired input and then press the SELECT button. Then you can switch to the desired input. 1 2 Use the ...

Page 33 - Video; Input 2; Video Input Source Selection; When connecting to video equipment, select the type of

33 When the video input signal is connected to the S-VIDEO jack, select S-Video. When the video input signal is connected to the Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. When the video input signal is connected to the VIDEO jack, select Video. When connecting to video equipment, select the type...

Page 34 - Computer System Selection; One of the following messages may appear when:; Auto; Selecting Computer System Manually; PC SySTEM MENU; PC system can also be selected manually.; Automatic Multi-Scan System; Computer Input

34 Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 75-76). If a computer is selected as a signal source, this projector automatically detects ...

Page 35 - Auto PC Adjustment; positions to conform to your computer.; PC ADjUST MENU; The Auto PC adjustment function can be operated; Direct Operation

35 Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Me...

Page 36 - Manual PC Adjustment; allows you to recall the setting for a specific computer.

36 Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store th...

Page 38 - Image Level Selection; Press the IMAGE SEL. button on the remote control to

38 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the SELECT button. IMAGE SELECT MENU Normal picture leve...

Page 39 - Screen Size Adjustment

39 ✔ Note: • True, Full screen, and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.34) • The projector cannot display and resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than 1600 x 1200, lower the resolution before connect...

Page 40 - For zooming in and out the images

40 Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. You can also enter the Digital zoom + mod...

Page 41 - Video System Selection; Video jack or S-Video jack; Video Input

41 Computer Input AV SySTEM MENU (VIDEO OR S-VIDEO) AV SySTEM MENU (COMPONENT VIDEO) Video System Selection Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. Use the Point ed buttons to move the red arrow pointer ...

Page 43 - SCREEN MENU; Custom

43 Screen Size Adjustment Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. 1 2 ✔ Note: • Wide cannot b...

Page 45 - Image Adjustment; COLOR SELECTION MODE; Picture Image

45 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the...

Page 46 - LIST MODE

46 Auto picture control Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2). Off . . . . Auto picture control OFF position. L1 . . . . . Auto picture control LEVEL 1 position. L2 . . . . . Auto picture control LEVEL 2 position. Clear the check mark if you do...

Page 48 - Setting

48 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Kore...

Page 49 - Capture

49 This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions. Logo ✔ Note: • Before capturing an image, select “Standard” in the Image Select Menu to capture a proper image. (pp. 38, 42) • A signal from a computer can be captured up to XGA (102...

Page 50 - Logo PIN code lock; Enter a Logo PIN code; Logo PIN Code Lock; Change the Logo PIN code lock setting; Change the Logo PIN code

50 Change the Logo PIN code lock setting After a correct Logo PIN code is entered, the following dialog box appears. Use the Point 7 8 buttons to switch On/Off, This function prevents an unauthorized person from changing the screen logo. Off . . . . The screen logo can be changed freely from the Log...

Page 51 - Lamp mode

51 Lamp control Choose the running speed of cooling fans from the following options. Normal ....... Normal speed. Max ........... Faster than the normal speed. Fan control This function allows you to change the brightness of the screen. Auto . . . . . Brightness according to the input signal. Normal...

Page 52 - RC sensor

52 Power management Time left before the lamp is off Press the SELECT button at Power management and the dialog box appears. Use the Point 7 8 buttons to choose one of the three options.Press the Point d button to select the timer, and then use the Point 7 8 buttons to set the timer For reducing pow...

Page 53 - If the side control accidentally becomes locked and you

53 Security Key lock Key lock Security Select Key lock and this box appears. Choose one of the alternatives with the Point ed buttons and select [Yes] to activate it. This function locks the side control and remote control buttons to prevent operation by unauthorized persons. . . . . . Unlocked. . ....

Page 55 - Shutter; Shutter function is available to block out light to the; Protection

55 Setting Shutter Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Prohibits the shutter operation from the remote control and the projector's side control. Remote control Selecting "On" prohibits the shutter operation ...

Page 57 - Maintenance and Care; Filter Instructions

57 Maintenance and Care Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of ...

Page 58 - Replacing the Filter Cartridge; RECOMMENDATION; we recommend avoiding dusty/smoky environments when; ORDER REPLACEMENT FILTER CARTRIDGE

58 Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 12 Slide and open the Filter cover. (See the right figure.) 3 Put the new one back into the position and close the filte...

Page 59 - Be sure to reset the Scroll counter after replacing the filter; Resetting the Scroll Counter; Scroll counter; Be sure to reset the Filter counter after replacing the filter; Resetting the Filter Counter; Filter counter

59 Be sure to reset the Scroll counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. Use the Point ed buttons to move the red frame pointer to Filter counter and then press ...

Page 60 - Lamp Management; Replace Indicators; yellow Lamp; Lamp Mode Changeover

60 Lamp Management This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLACE indicators. This function ...

Page 61 - NOTES ON LAMP REPLACEMENT; recommend replacing both 2 lamps at a time .; Lamp Replacement; LAMP 1 / 2 REPLACE indicators

61 Maintenance and Care Check the number of lamp to be replaced on the Lamp Status Display. Loosen a screw on the Lamp Cover. Slide and open the Lamp Cover until it makes a clicking sound. (See the right figure.) 1 3 Loosen two screws and pull out the Lamp to be replaced by grasping handle. 4 Turn o...

Page 62 - ORDER REPLACEMENT LAMP; following information to the dealer.; Model No . of your projector; Resetting the Lamp Counter; Lamp counter

62 Maintenance and Care ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. l Model No . of your projector : PLC-XF71 l Replacement Lamp Type No . : POA-LMP128 (Service Parts No. 610 341 9497) Rese...

Page 63 - LAMP HANDLING PRECAUTIONS

63 This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. l Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for e...

Page 65 - Warning Indicators; The projector is shut down and the WARNING TEMP.; Then check the matters below:; The projector is shut down and the LAMP indicator is

65 The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING TEMP. indicator and the LAMP indicator to take proper maintenance. Warning Indicators The projector is shut down and the WARNING TEMP. indicator is blinking red. When the temperature...

Page 66 - Troubleshooting; Make sure that all power is switched on.; Appendix; Solutions

66 Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21. 2. Check the cable connection. Make sure that all computers, video equipment, ...

Page 68 - standards against risk of fire, casualty, and electrical hazards.; Indicators blinks or lights.

68 wARNING: High voltages are used to operate this projector . Do not attempt to open the cabinet . If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem...

Page 69 - Menu Tree; Computer Input/Video Input; Image Adjust

69 Menu Tree Input RGB (PC analog) Go to System (1) Input 1 Y, Pb/Cb,Pr/Cr Computer Input/Video Input RGB (Scart) RGB (PC digital) RGB (AV HDCP) Input 3 RGB Go to System (1) Go to System (3) Go to System (2) Video S-video Input 2 Go to System (1) InputH-sync freq.V-sync freq. Projector Information K...

Page 72 - Indicators and Projector Condition; The projector is operating normally .; • • • blinking fast; Projector Condition

72 Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally . • • • on • • • off • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx. 2 seconds ON, 2 seconds OFF) • • • blinking fa...

Page 73 - The projector is detecting abnormal condition .; wARNING FILTER

73 Appendix The projector is detecting abnormal condition . Indicators Projector Condition LAMP red READY green WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. orange The temperature inside the projector is elevated close to the abnormally high level. The temperature inside the pr...

Page 74 - The shutter is out of control.

74 Appendix The projector is detecting abnormal condition . Indicators Projector Condition LAMP red READY green WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. orange If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the sc...

Page 75 - Compatible Computer Specifications; and less than 230 MHz of Dot Clock.; DISPLAy

75 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. PC Adjustment can be limited when these modes are selected. Appendix ✽ “True” cannot be selected when WUXGA1, UXGA2,...

Page 77 - Technical Specifications

77 Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 20.87” x 10.53” x 29.8” (530 mm x 267.5 mm x 757 mm) (Not including projections) Net Weight 60.85lbs (27.6 kg) Feet Adjustment 0˚ to 2.8˚ Panel Resolution LCD Panel System 1.8” TFT Active M...

Page 78 - Optional Parts; Optional Interface Board (Network board)

78 Optional Parts Model No. Wired Remote Cable(30m) : POA-CA-RC30 Optional Interface Board (DVI) : POA-MD18DVI Optional Interface Board (5-BNC) : POA-MD16VD1 Optional Interface Board (D-sub 15) : POA-MD04VGA Optional Interface Board (Dual-SDI) : POA-MD17SDID Optional Interface Board (Network board) ...

Page 79 - Configurations of Terminals

79 Configurations of Terminals ANALOG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red)Ground (Green)Ground (Blue) 1 5 2 4 3 678 +5V Power Horiz. sync. Ground (Vert. sync.) DDC Data Ground Vert. sync.DDC Clock 9 13 1...

Page 80 - Put the label below (supplied) on in a prominent place of; Logo PIN Code Lock No.

80 Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * S h o u l d t h e fo u r- d i g i t n u ...

Page 81 - Dimensions

81 Dimensions Unit: inch (mm) Appendix 5.81( 147.5 ) 20.87(530) 20.65(524.5) 108 ° 8.66(220) 8.46(215) 1.18(30) 7.28(185) 23.62(600) 200.0 234.0 26.77(680) 3.03(77) 9.25(235) 9.25(235) 29.80(757.0) 5.00(127) 9.63(244.5) 10.53(267.5) 1.14(29) 9.82(249.5) 10.43(265) 10.89(276.5) 4.72(120) 8.27(210) 6....

Page 82 - Serial Control Interface; Example; Format; Operation; Functional Execution Command

82 Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See p.11) Launch a communication software provided wi...

Page 83 - Status Read Command

83 Status Read Command Appendix The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below. The projector decodes the command and returns the 'Character string' with the format below; Format Command Function Projec...