Sanyo PDG-DHT100L - Manuals

Page 2 - Features and Design

This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features. ◆ Functionally Rich ◆ Simple Computer System Setting Th e p r o j e c t o r h a s t h e M u l t i - s c a n s ys t e m t o conform t...

Page 3 - Trademarks; Table of Contents

Trademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.DLP is a registered trademark of Texas Instruments. BrilliantColor and DynamicBlack are trademarks of Texas Instruments. Table of Contents Features and Design ....

Page 4 - RISK OF ELECTRIC SHOCK; CAUTION; CAUTION ON HANGING FROM THE CEILING; To The Owner; Safety Precaution

4 CAUTION: TO R E D U C E T H E R I S K O F E L E C T R I C SHOCK, DO NOT REMOVE COVER (OR BACK) . NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT...

Page 5 - Safety Instructions

5 All the safet y and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow ...

Page 6 - Air Circulation; Top Panel

6 Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions...

Page 7 - Installing the; Positioning Precautions

7 Safety Instructions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. In...

Page 8 - Moving the Projector; CAUTION IN CARRyING OR

Moving the Projector CAUTION IN CARRyING OR TRANSPORTING THE PROjECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not transport the projector by courier or any other transport service in an unsu...

Page 9 - AC Power Cord for the United Kingdom:; WARNING: THIS APPARATUS MUST BE EARTHED .; AC Power Cord for the United States and Canada:; AC Power Cord Requirement; Compliance; Federal Communications Commission Notice; WARNING; case the user may be required to take adequate measures.; Canadian Radio Interference Regulations

9 AC Power Cord for the United Kingdom: This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus ASA . If the fuse...

Page 10 - Front; Terminals and Connectors; Hot air is exhausted from the exhaust; Part Names and Functions; Kensington Security Slot; This slot is for a Kensington lock used to

10 u e r t Front o q w y i Back q Projection Lens (Option) w Indicators e Infrared Remote Receiver (Front) r Handle t Adjustable Feet y Side Control u Terminals and Connectors i Main On/Off Switch o Power Cord Connector !0 Lamp Cover !2 CAUTION Hot air is exhausted from the exhaust vent. Do not put ...

Page 12 - Side Control and Indicators; Side Control

1 r FOCUS button Adjust the focus. (p.28) e ZOOM button Zoom in and out the images. (p.28) q ON/STAND-By button Turn the projector on or off. (pp.24,25) !0 INPUT button Select an input source INPUT 1, INPUT 2, Input 3 or Input 4. (pp.32-34) u AUTO PC ADj . button Automatically adjust the computer im...

Page 13 - Indicators

1 Indicators q w e r t y u e WARNING TEMP . indicator This indicator flashes red when internal projector temperature is too high. (pp.70, 77-79) u LAMP REPLACE indicator Turn orange when the life of the projection lamp2 draws to an end. (pp.66, 78) q POWER indicator This indicator lights green when ...

Page 14 - Remote Control; Light the buttons on the remote control for about 10 seconds.

Remote Control Part Names and Functions q t e !0 i !4 r !3 !1 w y o !7 !2 !8 !9 @0 e LIGHT button Light the buttons on the remote control for about 10 seconds. r MENU button Open or close the On-Screen MENU. (pp.26-27) t POINT ed 7 8 buttons – Select an item or adjust the value in the ON-SCREEN MENU...

Page 15 - Remote Control Battery Installation; Remote Control Receivers and Operating Range

Remote Control Battery Installation 1 2 3 Open the battery compartment lid. Install new batteries into the compartment. Replace the compartment lid. Two AA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. To ensure safe operation, ...

Page 16 - Remote Control Code

16 The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code ...

Page 17 - Installation; Lens Installation; This projector is designed to project on a flat projection

17 Installation Lens Installation Before setting up the projector, install Projection Lens on the projector. Before installation, check where the projector is used and prepare a suitable lens. For the specifications of Projection Lens, contact sales dealer where you purchased the projector. - Lens i...

Page 18 - Lens Shift Adjustment; When the lens is shifted to top .; Picture Level and Pitch Adjustment

1 Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen. (See page 28) Lens Shift Adjustment When the lens is shifted to top . The display position can be shifted upward up to 67.7% e...

Page 19 - Terminals of Projector; Replacement of Terminal

19 Terminals of Projector The projector has two replaceable Interface board slots. The projector's functions can be extended by installing the optional interface boards into the terminal slots. 1 vacant slot (Input 3) is provided in your purchasing the projector. For the Optional Interface Boards, c...

Page 20 - Connecting to Computer; Unplug the power cords of both the; Cables used for connection; • DVI Cable

0 Installation Connecting to Computer VGA Cable Monitor Output Desktop type Laptop type Terminals of the projector DVI Cable BNC Cable Monitor Output Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. G V H/HV R B DIGITAL ANALOG VGA Cable...

Page 21 - Connecting to Video Equipment; Monitor Out Signal Table

1 Installation Connecting to Video Equipment Video Source (example) Video Cassette Recorder DVD Player RGB SCART 21-pin Output Y Pb/Cb Pr/Cr Y-Pb/Cb-Pr/Cr Component video output equipment. (such as DVD player or high-definition TV source.) Component Video Output BNCCable DVI Cable SCART-VGACable DIG...

Page 22 - Attaching the Cable Cover

Installation Attaching the Cable Cover Fix the opposite end of the strap to the hole inside the support cover with a screw (supplied). 1 3 Insert the support cover into the cover insertion slot and slide it to the left. 4 Tie a strap (supplied) to the lower bracket on the right side of the projector...

Page 23 - NOTE ON THE POWER CORD; Projector side; For Continental Europe; Connecting the AC Power Cord

NOTE ON THE POWER CORD AC power cord must meet the requirements of the country where you use the projector.Confirm the AC plug type with the chart below and proper AC power cord must be used.If the supplied AC power cord does not match your AC outlet, contact your sales dealer. Projector side AC Out...

Page 24 - Turning On the Projector; Enter a PIN code; Basic Operation

4 Turning On the Projector Connect the projector’s AC power cord into an AC outlet and turn on the MAIN ON/OFF Switch. The LAMP indicator lights red and the POWER indicator lights green. Press the ON/STAND-BY button on the side control or on the remote control. The LAMP indicator dims red and the co...

Page 25 - Turning Off the Projector

5 Press the ON/STAND-BY button on the side control or on the remote control, and “Power off?” appears on the screen. Press the ON/STAND-BY button on the side control or on the remote control again to turn off the projector. The LAMP indicator lights bright and the POWER indicator turns off. After th...

Page 26 - How to Operate the On-Screen Menu

6 Side Control SELECT button How to Operate the On-Screen Menu MENU button SELECT button POINT buttons On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Use the Point 7 8 buttons to ...

Page 27 - Menu Bar; For Computer Source

7 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p.35). Used to select an image level among Standard, Real, Dynamic, and Image 1–10 (p.39). Used to adjust the size of the image. [Normal/True/Full/ Custom/Digital zoom +/–/Ke...

Page 28 - Operating with Projector Control; Zoom; Auto PC

Operating with Projector Control Display “Lens shift” on the screen. Use the Point ed7 8 buttons to position the screen to the desired point without having picture distortion. The screen can be moved up or down to 67.7 percent, or sideways up to 41.6 percent from the central axis of the lens shift. ...

Page 29 - Information

9 Basic Operation Information Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFORMATION button to display the information window on the screen. Press the Point d button or the INFORMATION bu...

Page 30 - Operating with Remote Control

0 Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the FREEZE button on the remote control to freeze the picture on ...

Page 31 - KEySTONE button; SHUTTER button

1 KEySTONE button Reduce the upper width with Point e button. Re d u c e t h e l owe r w i d t h with Point d button. Reduce the left part with Point 7 button. Reduce the right part with Point 8 button. • The white arrows indicate that there is no correction. • A red arrow indicates the direction of...

Page 32 - Input; Remote Control Operation; Side Control Operation; Side Control button operation; Input Selection; Remote Control button operation

Remote Control INPUT buttons Input Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button on the remote control. The input source appears on the screen as you press each button. Select the connected input source. Remote Control Operation Side Control INPUT button Press the INPUT button on the side co...

Page 33 - Menu Operation; Computer Input Source Selection; When Selecting the INPUT 1 with DVI/D-sub 15 terminals

Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired input and then press the SELECT button. Then you can switch to the desired input. 1 2 Use the Poi...

Page 34 - Video Input Source Selection; When connecting to video equipment, select the type of

4 When the video input signal is connected to the S-VIDEO jack, select S-video. When the video input signal is connected to the Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. When the video input signal is connected to the VIDEO jack, select Video. When connecting to video equipment, select the type ...

Page 35 - Computer System Selection; One of the following messages may appear when:; Selecting Computer System Manually; PC system can also be selected manually.; Automatic Multi-Scan System; Computer Input

5 Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 80-81). If a computer is selected as a signal source, this projector automatically detects t...

Page 36 - Auto PC Adjustment; positions to conform to your computer.; The Auto PC adjustment function can be operated; Direct Operation

6 Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Men...

Page 37 - Manual PC Adjustment; allows you to recall the setting for a specific computer.

7 Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store tho...

Page 39 - Image Level Selection; Press the IMAGE SEL. button on the remote control to

9 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the SELECT button. IMAGE SELECT MENU Normal picture level...

Page 40 - Screen Size Adjustment

40 ✔ Note: • True, Full, and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.35) • The projector cannot display the resolution higher than 1920 x 1080. If your computer’s screen resolution is higher than 1600 x 1200, lower the resolution before connecting the...

Page 41 - For zooming in and out the images

41 Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. You can also enter the Digital zoom + mod...

Page 42 - Video System Selection; Video jack or S-Video jack; Video Input

4 AV SySTEM MENU (VIDEO OR S-VIDEO) AV SySTEM MENU (COMPONENT VIDEO) Video System Selection Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired s...

Page 46 - Image Adjustment; COLOR SELECTION MODE; Picture Image

46 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the...

Page 47 - LIST MODE

47 Auto picture control Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2). Off . . . . Auto picture control OFF position. L1 . . . . . Auto picture control LEVEL 1 position. L2 . . . . . Auto picture control LEVEL 2 position. Clear the check mark if you do...

Page 49 - Setting

49 Picture Image Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian,...

Page 55 - Enter a Logo PIN code; Change the Logo PIN code lock setting

55 Change the Logo PIN code lock setting After a correct Logo PIN code is entered, the following dialog box appears. Use the Point 7 8 buttons to switch On/Off, This function prevents an unauthorized person from changing the screen logo. Off . . . . The screen logo can be changed freely from the Log...

Page 58 - If the side control accidentally becomes locked and you

5 Security Key lock Key lock Security Select Key lock and this box appears. Choose one of the alternatives with the Point ed buttons and select [Yes] to activate it. This function locks the side control and remote control buttons to prevent operation by unauthorized persons. . . . . . Unlocked. . . ...

Page 60 - Shutter function is available to block out light to the

60 Setting Shutter Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Prohibits the shutter operation from the remote control and the projector's side control. Remote control . . . Selecting "On" prohibits the shutter oper...

Page 62 - Maintenance and Care; Filter Instructions

6 Maintenance and Care Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of t...

Page 63 - Replacing the Filter Cartridge; RECOMMENDATION; ORDER REPLACEMENT FILTER CARTRIDGE

6 Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 12 Open the filter cover. (See the right figure.) 3 Put the new one back into the position and close the filter cover. Ma...

Page 64 - Be sure to reset the Scroll counter after replacing the filter; Resetting the Scroll Counter; Scroll counter; Be sure to reset the Filter counter after replacing the filter; Resetting the Filter Counter; Filter counter

64 Be sure to reset the Scroll counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. Use the Point ed buttons to move the red frame pointer to Filter counter and then press ...

Page 65 - Lamp Management; Replace Indicators; yellow Lamp; Lamp Mode Changeover

65 Lamp Management This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLACE indicators. This function ...

Page 66 - NOTES ON LAMP REPLACEMENT; recommend replacing both lamps at a time .; Lamp Replacement

66 Maintenance and Care Check the number of lamp to be replaced on the Lamp Status Display. Loosen a screw on the Lamp Cover. Slide and open the Lamp Cover until it makes a clicking sound. (See the right figure.) 1 3 Loosen two screws and pull out the Lamp to be replaced by grasping handle. 4 Turn o...

Page 67 - LAMP HANDLING PRECAUTIONS; ORDER REPLACEMENT LAMP; information to the dealer.; Model No . of your projector

67 This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. l Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for e...

Page 68 - Optional Color Wheel Installation

6 Maintenance and Care Optional Color Wheel Installation The projector comes with the high brightness color wheels installed. Additional rich color reproduction color wheels are supplied. To replace the color wheels, refer to the following steps. ✔ Note: • Wait until the lamp house and the color whe...

Page 70 - Warning Indicators; The projector is shut down and the WARNING TEMP.; Then check the matters below:; The projector is shut down and the LAMP indicator is

70 The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING TEMP. indicator and the LAMP indicator to take proper maintenance. Warning Indicators The projector is shut down and the WARNING TEMP. indicator is blinking red. When the temperature...

Page 71 - Troubleshooting; Make sure that all power is switched on.; Appendix; Solutions

71 Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21. 2. Check the cable connection. Make sure that all computers, video equipment, ...

Page 72 - The color is strange.

7 appears on the screen – The end of lamp life is approaching. Replace the lamp with a new one promptly. (See page 66) appears on the screen – The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 62-63) The image is out of focus. – Adjust the focus of the pro...

Page 73 - standards against risk of fire, casualty, and electrical hazards.; Indicators blinks or lights.

7 WARNING: High voltages are used to operate this projector . Do not attempt to open the cabinet . If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem....

Page 74 - Menu Tree; Computer Input/Video Input; Network

74 Menu Tree Input RGB (PC analog) Go to System (1) Input 1 Y, Pb/Cb,Pr/Cr Computer Input/Video Input RGB (Scart) RGB (PC digital) RGB (AV HDCP) Input 3 RGB Go to System (1) Go to System (3) Go to System (2) Video S-video Input 2 Go to System (1) InputH-sync freq.V-sync freq. Projector Information K...

Page 77 - Indicators and Projector Condition; The projector is operating normally .; Projector Condition

77 Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally . • • • on • • • off • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx. 2 seconds ON, 2 seconds OFF) • • • blinking fa...

Page 78 - The projector is detecting abnormal condition .

7 Appendix The projector is detecting abnormal condition . Indicators Projector Condition LAMP red POWER green WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP 1/2 REP. orange The temperature inside the projector is elevated close to the abnormally high level. The temperature inside the pro...

Page 80 - Compatible Computer Specifications; and less than 230 MHz of Dot Clock.

0 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. Appendix ✽ “True” cannot be selected when WUXGA1, WXGA+2, UXGA1, UXGA2, UXGA3, UXGA4 and UXGA5 are selected. (p.40) O...

Page 81 - RESOLUTION; RESOLUTION

1 Appendix ON-SCREEN DISPLAy RESOLUTION H-Freq .(kHz) V-Freq .(Hz) 1080p 1920x1080 33.750 30.000 1920x1080 28.125 25.000 1920x1080 27.000 24.000 1920x1080 67.500 60.000 1920x1080 56.250 50.000 1080psf/30 1920x1080 33.750 60.000 1080psf/25 1920x1080 28.125 50.000 1080psf/24 1920x1080 27.000 48.000 Wh...

Page 82 - List of Picture in Picture

Appendix On-Board Optional Interface Board Input1 Input2 Dsub Dsub -DVI Component -S-video Component HDCP -DVI SDI HD wireless Analog PC Scart Digit al Analog PC Component Video/ S-Video Analog PC Analog PC Scart Digit al Analog PC Component Video/ S-video Analog PC Component Analog PC Scart Digit a...

Page 83 - Technical Specifications

Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 15.75” x 9.55” x 20.61” (400.0 mm x 242.5 mm x 523.5 mm) Net Weight 43.65lbs (19.8 kg) Feet Adjustment 0˚ to 5˚ DLP Chip Projection System 0.95” Single DLP chip, High brightness color wheel x ...

Page 84 - Optional Parts; Optional Interface Board (HD DATA Wireless Receiver)

4 Optional Parts Model No. Wired Remote Cable(30m) : POA-CA-RC30 Optional Interface Board (DVI) : POA-MD18DVI Optional Interface Board (5-BNC) : POA-MD16VD1 Optional Interface Board (D-sub 15) : POA-MD04VGA Optional Interface Board (Dual-SDI) : POA-MD17SDID Optional Interface Board (DVI / D-sub 15) ...

Page 85 - Configurations of Terminals; HDMI

5 Configurations of Terminals ANALOG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red)Ground (Green)Ground (Blue) 1 5 4 67 +5V Power Horiz. sync. Ground (Vert. sync.) DDC Data Ground Vert. sync.DDC Clock 9 1 10 1 11 ...

Page 86 - Put the label below (supplied) on in a prominent place of; Logo PIN Code Lock No.

6 Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * S h o u l d t h e fo u r- d i g i t n u m...

Page 87 - Dimensions

7 Dimensions Unit: inch (mm) Appendix 0.28(7.0) 9.21(234.0) 9.55(242.5) 4.45(113.0) 20.47(520.0) 20.61(523.5) 15.75(400.0) 8.31(211.0) 5.0º 5.0º 19.96(507.1) 96.0º 6.02(153.0) 5.63(143.0) 6.81(173.0) 6.81(173.0) 5.08(129.0) 4.65(118.0) 2.64(67.0) 4.25(108.0) 12.48(317.0) 5.79(147.0) 4.92(125.0) 6.50...

Page 88 - Serial Control Interface; Example; Format; Operation; Functional Execution Command

Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See p.11) Launch a communication software provided with ...

Page 89 - Status Read Command

9 Status Read Command Appendix The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below. The projector decodes the command and returns the 'Character string' with the format below; Format Command Function Project...