Sanyo MPR-513R - Manuals

7 CAUTIONS FOR USAGE Circuit breaker This unit is equipped with a circuit breaker on the back. Make sure to switch ON this breaker before the unit starts to run. Following figures show the circuit breaker position. When the operation of the unit is stopped by this breaker, contact a dealer or a serv...

8 REFRIGERATOR COMPONENTS 10 11 5 6 3 13 4 12 9 14 8 2 7 1 14 14 11 5 9 3 13 15 16 8 2 15 16 14 1 12 10 7 6 MPR-513R MPR-1013R 17 10 4

10 REFRIGERATOR COMPONENTS Control panel and keypad 1. Buzzer stop key (BZ): To silence the audible alarm, press this key. Press it once again to reactivate the alarm. 2. Set key (SET): Temperature setting mode is initiated by pressing this key. Once the key is pressed, the digit to be changed will ...

11 INSTALLATION Installation site To operate this unit properly and to obtain maximum performance, install the unit in a location with the following conditions: 1. A location not subjected to direct sunlight Installation in a location subjected to direct sunlight may lead to inadequate cooling. 2. A...

12 INSTALLATION Installation 1. Remove the packaging materials and tapes Remove all transportation packaging materials and tapes. Open the doors and ventilate the unit. If the outside panels are dirty, clean them with a neutral detergent and wipe it off with a soft cloth washed in clean water. 2. Ad...

13 OPTIONAL COMPONENTS Automatic temperature recorder An automatic temperature recorder is available for this refrigerator as an optional accessory. If an automatic temperature recorder is required, contact your Sanyo dealer. For the proper usage of temperature recorder, refer to an instruction manu...

14 OPTIONAL COMPONENTS Attachment of recorder MTR-G04 WARNING Always disconnect the power supply plug before installing an automatic temperature recorder in order to prevent electric shock or injury. 1. Follow the instruction manual provided with the temperature recorder and attach the recorder to t...

15 START-UP OF UNIT Follow the procedures for the initial and consequent operations of the unit.     1. Connect the power cord to the dedicated outlet with appropriate rating. 2. On start-up, the alarm buzzer sometimes operates. In this case, stop the buzzer by pressing the alarm stop key (BZ). 3. S...

16 TEMPERATURE SETTING Chamber temperature Table 1 shows the basic procedure for setting the chamber temperature. Perform key operations in the sequence indicated in the table. The example in the table is based on the assumption that the desired temperature is 4 o C. Note: The unit is set at the fac...

17 TEMPERATURE SETTING Alarm temperature setting This unit is provided with both high and low temperature alarms. The temperature at which the alarm is activated may be changed. The available set range for high temperature alarm is between +2 o C and +14 o C and -2 o C and -14 o C for low temperatur...

18 ALARMS & SAFETY FUNCTIONS This unit has the alarms and safety functions shown in Table 5, and also self diagnostic functions. Table 5. Alarms and safety functions Alarm & Safety Situation Indication Buzzer Safety operation High temperature alarm If the chamber temperature deviates from th...

19 ALARMS & SAFETY FUNCTIONS Remote alarm terminal WARNING Always disconnect the power supply to the unit prior to connection of alarm equipment to the terminal in order to prevent electric shock or injury. The terminal to which a lead wire of remote alarm is connected is positioned in the box a...

20 ROUTINE MAINTENANCE WARNING Always disconnect the power supply to the unit prior to any repair or maintenance of the unit in order to prevent electric shock or injury. Ensure you do not inhale or consume medication or aerosols from around the unit at the time of maintenance. These may be harmful ...

21 ROUTINE MAINTENANCE Clean the evaporating tray once a month following the procedure below. Cleaning of evaporating tray 1. Remove the screws on the bottom of the unit cover and remove the cover. See Fig. 1. 2. For model MPR-513 and MPR-513R, remove the evaporating tray mounting plate by pulling o...

22 ROUTINE MAINTENANCE Replacement of fluorescent lamp 1. The fluorescent lamp is placed vertically at the center of the frame (MPR1013 and MPR-1013R) and horizontally at the top front of the cabinet (MPR-513 and MPR-513R) 2. Turn off the fluorescent lamp switch and disconnect the power supply plug ...

24 SPECIFICATIONS     Name   Pharmaceutical Refrigerator   Model   MPR-1013 MPR-1013R MPR-513 MPR-513R External dimensions   W1800 x D600 x H1790 (mm) W900 x D600 x H1790 (mm) Internal dimensions   W1700 x D465 x H1300 (mm) W800 x D465 x H1300 (mm) Effective capacity   1037 L 1034 L 489 L 486 L Exte...

25     PERFORMANCE     Model MPR-513, MPR-513R Temperature control range +2 o C to +14 o C Usable ambient temperature -5 o C to +35 o C Noise level 45dB (A scale) Maximum pressure 1500 kPa Rated voltage AC 110 V AC 115 V AC 220 V AC 220 V AC 230 V AC 240 V Rated frequency 60 Hz 60 Hz 60 Hz 50 Hz 50 ...

26 CAUTION Please fill in this form before servicing. Hand over this form to the service engineer to keep for his and your safety. Safety check sheet 1. Refrigerator contents : Risk of infection: Risk of toxicity: Risk from radioactive sources: (List all potentially hazardous materials that have bee...