Sanyo MPR-414F - Manuals

Sanyo MPR-414F – Manual in PDF format online.

Manuals:

Manual

Manual Sanyo MPR-414F

Summary

Page 3 - PRECAUTIONS FOR SAFE OPERATION; WARNING

34 2 PRECAUTIONS FOR SAFE OPERATION It is imperative that the user complies with this manual as it contains important safety advice. Items and procedures are described so that you can use this unit correctly and safely. If the precautions advised are followed, this will prevent possible injury to th...

Page 6 - CAUTION

37 5 PRECAUTIONS FOR SAFE OPERATION Select a level and sturdy floor for installation. This precaution will prevent the unit from tipping. Improper installation may result in water spillage or injury from the unit tipping over. Connect the unit to a power source as indicated on the rating label attac...

Page 7 - CAUTIONS FOR USAGE

38 6 CAUTIONS FOR USAGE 1. If the unit is unplugged or the power to the unit is interrupted, do not restart the unit for at least 5 minutes. This protects the compressor. 2. This inner cabinet is refrigerated by the forced circulation of cooled air inside the chamber. Ensure that the intake and exha...

Page 9 - REFRIGERATOR COMPONENTS

40 8 REFRIGERATOR COMPONENTS MPR-414F with drawers (optional component) 3 2 4 1 4 5 8 8 6 7 9 10 11 12 13 14 Freezer Refrigerator 15 16 17

Page 11 - Control panel

42 10 REFRIGERATOR COMPONENTS Control panel 1. Alarm buzzer stop key (BZ): Press this key to silence the buzzer in the event that the alarm operates and buzzer sounds. See page 17 for the details. 2. Display select key (REF./FREEZ.): By pressing this key, chamber temperature display of refrigerator ...

Page 12 - INSTALLATION; Installation site

43 11 INSTALLATION Installation site To operate this unit properly and to obtain maximum performance, install the unit in a location with the following conditions: 1. A location not subjected to direct sunlight Installation in a location subjected to direct sunlight may lead to inadequate cooling. 2...

Page 13 - Installation

44 12 INSTALLATION Installation 1. Remove the packaging materials and tapes Remove all transportation packaging materials and tapes. Open the doors and ventilate the unit. If the outside panels are dirty, clean them with a diluted neutral dishwashing detergent. (Undiluted detergent can damage the pl...

Page 14 - OPERATING INSTRUCTIONS; Temperature setting

45 13 OPERATING INSTRUCTIONS Temperature setting Table 1 shows the basic operation method. Perform key operation in the sequence indicated in the table. The example in the table is based on the assumption that the refrigerator temperature is 4 o C and the freezer temperature is -25 o C. Note: The un...

Page 15 - Key lock operation

46 14 OPERATING INSTRUCTIONS Key lock operation This unit incorporates a key lock feature which can inhibit the tampering using the keys on the control panel. The key lock is set to OFF at the factory. Display Mode Function L 0 Key lock OFF Temperature change enabled L 1 Key lock ON Temperature chan...

Page 16 - Alarm temperature setting

47 15 OPERATING INSTRUCTIONS Alarm temperature setting The high temperature and low temperature at which the alarm will be activated are effective for freezer and refrigerator. The following shows the outline of the alarm temperature setting. Display Mode Application Settable range F01 High temp. al...

Page 18 - ALARMS AND SAFETY FUNCTIONS

49 17 ALARMS AND SAFETY FUNCTIONS This unit has the alarm and safety functions shown in Table 5, and also a self diagnostic function. Table 5 Alarms and safety functions Kind of alarm or safety Situation Indication Buzzer Safety operation • Refrigerator If the chamber temperature exceeds the set tem...

Page 19 - SETTING OF ALARM RESUME TIME

50 18 SETTING OF ALARM RESUME TIME The alarm buzzer and remote alarm are silenced by pressing BUZZER key on the control panel during alarm condition. The buzzer and remote alarm will be activated again after certain suspension if the alarm condition is continued. The suspension time can be set by fo...

Page 20 - DEFROSTING

51 19 DEFROSTING Refrigerator The following 2 kinds of defrost methods are adopted for the refrigerator, which control defrosting automatically. 1. Cycle defrost To keep the temperature stable inside the chamber, the refrigeration compressor is cycled on and off. During “off” periods any frost which...

Page 21 - MAINTENANCE; Cleaning

52 20 MAINTENANCE WARNING Always disconnect the power supply to the unit prior to any repair or maintenance of the unit in order to prevent electric shock or injury. Ensure you do not inhale or consume medication or aerosols from around the unit at the time of maintenance. These may be harmful to yo...

Page 22 - OPTIONAL COMPONENT; Automatic temperature recorder

53 21 OPTIONAL COMPONENT Automatic temperature recorder To record the chamber temperature, an optional automatic temperature recorder is available. Please consult with our sales department or agency for recorder installation. For the proper usage of temperature recorder, refer to an instruction manu...

Page 23 - Installation of recorder

54 22 OPTIONAL COMPONENT Installation of recorder Refrigerator (MTR-0620LH) 1. Attach the fixture to the temperature recorder with two screws. (Fig. 1) 2. Remove the screws at the right corner on the top of the unit and fix the recorder to the attachment position. (Fig. 2) 3. Remove a rubber cap and...

Page 26 - SPECIFICATIONS

57 25 SPECIFICATIONS Name Pharmaceutical Refrigerator with Freezer Model MPR-414F MPR-414FS External dimensions W800 x D600 x H1805 (mm) Internal dimensions W720 x D495x H1425 (mm) (Refrigerator) W317 x D440x H576 (mm) (Freezer) Effective capacity 340 L (Refrigerator), 82 L (Freezer) Exterior Zinc g...

Page 27 - PERFORMANCE

58 26 PERFORMANCE Control range Refrigerator: 2 o C to 14 o C (Ambient temp.; -5 o C to +35 o C, No load) Freezer: -20 o C to -30 o C (Ambient temp.; -5 o C to +30 o C, No load) Noise level 39 dB (A scale) Maximum pressure 1.46 MPa (Refrigerator), 2.18 MPa (Freezer) Rated voltage AC 110 V AC 115 V A...