Sanyo FXD-780RDS - Manuals

Sanyo FXD-780RDS – Manual in PDF format online.

Manuals:

Manual

Manual Sanyo FXD-780RDS

Summary

Page 3 - COMPACT DISC CARE; Recommended CD-R Media

GB–2 • To prevent warping the disc, do not expose it to direct sunlight, high humidity or high tem-peratures for extended periods of time. • Fingerprints and dust should be carefully wiped off the signal surface of the disc(glossy side) with a soft cloth.Wipe in a straight motion from the inside tot...

Page 4 - DIGITAL DISPLAY

GB–3 DIGITAL DISPLAY CD running indicator FM Stereo Manual tuning Track No. Local/DX Loudness TA TP AF REG PTY BAS-X Disc IN Audio Position Radio Frequency, Time, CDTrack Number, Audio ControlSelected Mode Shuffle Play Repeat Play Scan Mute CD changer mode CD changer mode (Disc repeat/ shuffle/scan)...

Page 5 - DETACHABLE FRONT PANEL; HOW TO ATTACH THE FRONT PANEL; RETURNING TO THE INITIAL SETTINGS; The unit will not operate if it is installed incorrectly.; CAUTION; • Do not drop the panel.; SECURITY INDICATOR

GB–4 DETACHABLE FRONT PANEL The front panel is designed to be removable for antitheft purposes.It is recommended that you remove and carry the front panel with you when you leave your car. HOW TO ATTACH THE FRONT PANEL Align the right side of the panel with the stopper, and then push the leftside of...

Page 6 - GENERAL OPERATION; Notes

GB–5 GENERAL OPERATION 1 2 3 4 5 6 AUDIO MUTE RPT SHF REL BAS-X ATP CDC POWER - - DISC - + TUNTRK SCAN AF AF FM /AM CD RECEIVER FXD-780RDS 50W x 4 VOL TURNING THE POWER ON ...................................... 1 Install the front panel and press the PWR MUTE button 1 when ACC is on. TURNING THE POW...

Page 7 - LOUDNESS EFFECT

GB–6 SWITCHING THE DISPLAY ........................................ 3 Each time you press the AUDIO button 3, the item changes as follows ; Initial set ↓ PS ➔ Frequency ➔ PTY ➔ Clock ➔ BAS ➔ TRE ➔ LOUD ➔ BAL ➔ FAD ➔ Mute level ➔ LO/DX DISPLAY PRIORITY SELECTOR ..........................................

Page 8 - Note

GB–7 ENHANCING THE BASS SOUND (BAS-X) ....................................... 7 Press the BAS-X button 7 to display the BAS-X INDICATOR ( ) on the display window. Each time you press the BAS-X button 7, current mode appears on the display window and the modechange as follows. Note Settings for BASS,...

Page 9 - TEL MUTE FUNCTION

GB–8 ADJUSTING THE SOUND STAGE ............................. 4 You can adjust the position of sound stage to best serve a particular seat. TO MEMORY THE SOUND STAGE ................................................... 4 1. Adjust the BALANCE & FADER. 2. Press the appropriate Preset buttons 4 for ...

Page 10 - RADIO OPERATION; SELECTING RADIO MODE

GB–9 RADIO OPERATION 1 2 3 4 5 6 AUDIO MUTE RPT SHF REL BAS-X ATP CDC POWER - - DISC - + TUNTRK SCAN AF AF FM /AM CD RECEIVER FXD-780RDS 50W x 4 VOL SELECTING RADIO MODE Press the BAND ATP button 1 to switch from CD mode to the radio mode.Each time the BAND ATP button is pressed, the selected band c...

Page 11 - This function is available for FM 3 and AM 2.

GB–10 ATP (AUTO TRAVEL PRESET) OPERATION ................................... 1 The Auto Travel Preset function searches for and memorizes the 6 strong stations in one of the two bands(FM 3, AM 2) in order of signal strength.This feature is useful when you are driving in an unfamiliar location and wa...

Page 12 - RDS OPERATION; CHANGING THE DISPLAYED ITEMS; • In the AF mode, “NO ALTERNATIVE FREQUENCY AVAILABLE” appears in the

GB–11 RDS OPERATION Radio Data System (RDS) is a digital information system that sends additional digital information alongwith the regular FM radio programme signal. As soon as a radio station has been identified, the stationname, including a regional identifier if applicable, will appear in the di...

Page 15 - CD OPERATION; LOADING AND EJECTING THE CD; dition of the disc) may not play on this unit.

GB–14 CD OPERATION The compact disc player will accept 5” CD only. 1 2 3 4 5 6 AUDIO MUTE RPT SHF REL BAS-X ATP CDC POWER - - DISC - + TUNTRK SCAN AF AF FM /AM CD RECEIVER FXD-780RDS 50W x 4 VOL LOADING AND EJECTING THE CD Insert a disc into the CD slot 1 and the CD player will start.The system rema...

Page 16 - • During playback of a CD, the CD running indicator

GB–15 PLACING THE CD IN PAUSE MODE ................................................ 5 While playing a CD, press the Preset 6 button 5.To resume playing, press the Preset 6 button again. Notes • During playback of a CD, the CD running indicator spins. • The unit will turn-on automatically when a CD i...

Page 17 - CD CHANGER OPERATION

GB–16 CD CHANGER OPERATION The unit can be used tocontrol the functions of the CD Changer. Please check with your nearest dealer forrecommendations of the models that will work with this unit. 1 2 3 4 5 6 AUDIO MUTE RPT SHF REL BAS-X ATP CDC POWER - - DISC - + TUNTRK SCAN AF AF FM /AM CD RECEIVER FX...

Page 19 - ERROR SIGNS; CD ERROR

GB–18 ERROR SIGNS If a problem should occur while operating the CD player, one of the following error signs may be displayed.Refer to the table below to identify the problem, then take the suggested corrective action. If the errorpersists, contact your nearest dealer. Message Cause Remedy Dirty disc...

Page 20 - HINTS FOR PROPER AND SAFE OPERATION

GB–19 HINTS FOR PROPER AND SAFE OPERATION • Condensation Moisture can condense on the optical lens of the CD player during humid or rainy days, or after the carheater is turned on. If this occurs the disc player may not function properly. To remedy the situation,remove the disc from the unit and wai...

Page 21 - TROUBLESHOOTING

GB–20 TROUBLESHOOTING Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with the unit.Before having the unit serviced, refer to the troubleshooting chart below. The compact disc does notplay when inserted into theunit. No power. The unit does not work prop-er...

Page 22 - ACCESSORIES AND HARDWARE; INSTALLATION; BEFORE INSTALLATION

GB–21 ACCESSORIES AND HARDWARE INSTALLATION Mounting Bracket Mounting Strap Locking Screw (Half Sleeve) × 1 and Screws × 1 × 1 Removable Trim Ring Unlock Levers × 1 × 2 INSTALLATION 1. BEFORE INSTALLATION When mounting the unit in a car, keep the unit as level as possible.If the unit must be mounted...

Page 23 - INSTALLATION PROCEDURES; UNIT REMOVAL; • Keep the unlock levers in a safe place for future use.

GB–22 2. INSTALLATION PROCEDURES When mounting the unit into a DIN–standard cutout (182 × 53 mm) in the dashboard or console, attach the provided Removable Trim Ring to the unit. 1. Insert the mounting bracket into the DIN-standard cutout (182 × 53 mm) in the dashboard or console. 2. Bend the mounti...

Page 24 - ELECTRICAL CONNECTIONS; WIRING; • DO NOT connect any speaker wires to the metal body or chassis of the

GB–23 ELECTRICAL CONNECTIONS WIRING (White) (White/Black) (Gray) (Gray/Black) (Green) (Green/Black) (Violet) (Violet/Black) Left Speaker Right Speaker Do Not Connect Front LeftSpeaker Front RightSpeaker Rear Left Speaker Rear Right Speaker (White) (White/Black) (Gray) (Gray/Black) (Green) (Green/Bla...

Page 25 - from shorting to the unit or the vehicle chassis.; REPLACING THE FUSE; LINE OUT CONNECTIONS

GB–24 Notes • When using a two-speaker installation, the Green, Green/Black, Violet, Vio- let/Black wires, which are used for a four-speaker installation, are not used. The ends of these wires must be covered with electrical tape to prevent them from shorting to the unit or the vehicle chassis. • Wh...