Sanyo DVR-S120 - Manuals

4 Rear Panel 1 3 4 9 8 10 2 5 6 7 1 ANTENNA IN Aerial input: Socket into which aerial input is connected. p.9 2 ANTENNA OUT Aerial output: Socket from where aerial output is connected to TV set. p.9 3 COMPONENT VIDEO OUT Video output: Socket from where YUV (Component Video) output is connected to YU...

5 Remote Control OK 12 8 10 11 16 13 2425 2829 17 182021 3 4 5 6 9 12 15 14 19 23222726 3130 7 1 o To switch set on or standby, interrupt menu function, interrupt a programmed recording (TIMER). p.14p.17 2 TIMER To program a recording with the Video Plus+ system / without the Video Plus+ system or t...

6 Inserting batteries Install two “R6 (HP 7)” batteries. NOTE: - Remove the batteries if the remote control is not to be used for a month or more. Batteries left in the unit may leak and cause damage. Remote control range Operation Status Display Front panel display Remote sensor Within approx. 6 me...

7 Status display on TV screen The DVD status is also displayed on the TV screen. The status is displayed in the Status Display and Channel/Clock Display. Record DVD+RW 0:00:13 / 0:29:47 Title 1 : 01/01 OTR 00:30 AV1 23:31 : .. .. Status Display When you set “Feature” - “Status Display” at “System Me...

8 Playable Discs Disc Type Logo Mark DVD video DVD+RW DVD+R Audio CD NOTE: - Only the above types of discs can be played on this unit. DVD-Audio, DVD-ROM, DVD-RAM, DVD-RW (VR mode), CD-ROM, CVD, SACD, etc. cannot be played. - Region number (Regional restriction code) is built-in to the unit and DVD ...

9 INSTALLATION, CONNECTION & SETTING THE CHANNEL NOTE: - Do not connect the mains lead to an AC outlet until all connections have been made. - Please refer to the instruction manuals for the equipments that you are connecting (TV, VCR, etc.). - When you connect the unit to your TV and other equi...

10 When connecting to a TV without a SCART terminalConnection without using the SCART socket cable Connecting to a TV with the audio/video leadIf your TV has a video input socket, connect the unit as shown. R-AUDIO-L VIDEO S-VIDEO AUDIOVIDEO INPUT 1 Audio/video lead Connecting to a TV with an S-vide...

11 Connecting a satellite receiver For Digital Cable and Satellite TV users please connect your decoder’s output to this unit’s input.Use a SCART cable (not supplied) to connect the AV2 (Scart socket) on this unit to the SCART OUT socket on the satellite receiver. SCART lead (not supplied) DVD Recor...

12 Connecting to a stereo audio ampli fi er or receiver Use an audio cord to connect the AUDIO OUT on the unit to the audio input on a stereo ampli fi er or a receiver. IN Audio lead (not supplied) Stereo audio amplifier or receiver L R L R Connecting to a video deck and other recording equipment Vi...

13 When connecting a VCR, etc. having an S-video terminal, connect by an S-video lead. R-AUDIO-L VIDEO S-VIDEO AUDIOVIDEO INPUT 1 VCR, etc. S-video lead (not supplied) Audio lead (not supplied) Connection for recording video images from other video equipment on the DVD recorder AUDIO R L VIDEO S-VID...

14 Connecting the Main Lead After all connections have been made, connect the mains lead to an AC outlet. When the power supply is connected for the fi rst time, the initial setup screen will automatically be displayed.Follow the on-screen instructions to make the initial settings. NOTE: - If the in...

15 Auto-setting the channel 1. The following screen is displayed. Check the antenna connection and press the k button. Connect Antenna Press OK to Continue Please Connect Your Antenna Now! 2. The automatic TV channel search starts and a progress bar is shown. This allows the DVD recorder to save all...

16 3. The search for channels that can be received begins from the smallest frequency or channel No. of the channel displayed at “Entry/Search” and increases upwards to larger values. When the desired channel is found, changing of the number value comes to a stop. Press 2 to advance to the “Programm...

17 RECORDING Recording Programmes during Reception 1. Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.) 2. Press o button. (It takes time to enter the condition the power supplied.) 3. Press r OPEN/CLOSE to open the disc tray, and p...

18 To One Touch Recording (OTR) The power can be automatically turned off after recording for the speci fi ed time without setting timer recording. DVD recorder will automatically switch off after ending recording.When you press REC q during recording, you can increase the recording time 30 minutes ...

19 NOTE: - What is “VPS/PDC?” “VPS” (Video Programming System) and “PDC” (Programme Delivery Control) are mechanisms for controlling start of recording and the continuation time according to signals that arrive from the TV sta-tion. These control mechanisms allows reserved programmes to be recorded ...

20 Timer recording without using “Video Plus+ code” 1. Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.) 2. Press TIMER to display the TIMER screen. NOTE: - When the clock has not been set, the "Set Date and Time" screen wil...

21 Checking, Changing and Deleting Reservations 1. Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.) 2. Press TIMER to display the TIMER screen. 3. Select “Timer List” using 8 or 2 , and press the k button. Timer To Exit Press TIMER...

22 Recording Video from Other AV Equipment Video output from video cameras and other AV equipment can be recorded on the DVD recorder. NOTE: - Prepare other AV equipment in advance, and prepare the equipment for playback. ("Connecting to a video deck and other recording equip-ment" page 12) ...

23 DISC PLAYBACK Basic Operations 1. Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.) 2. Press o button. (It takes time to enter the condition the power supplied.) 3. Press r OPEN/CLOSE to open the disc tray. 4. Place the disc with...

24 Various Playback Operations Using T/C Tools When you press T/C during playback or while playback is paused, the “T/C Tools” menu is displayed.Select the menu item using 8 or 2 and set the desired feature according to the description in the following table. T/C Tools Title 03 Chapter 02 Zoom OK OK...

25 Repeat Playback, Random Playback, Intro Playback Each press of the PLAY MODE button during playback displays the play modes. Press the k button to select the desired play mode. Playback Mode Explanation of Operation Repeat Track Repeats the track currently being played. Repeat Disc Repeats all tr...

26 VIEWING JPEG CD PHOTOS & IMAGES Playable Discs Discs recorded with images saved in JPEG format such as KODAK Picture CDs can be played on the DVD recorder. NOTE: - The fi le system is ISO9660 Level 1 and Level 2. - When creating discs on a personal computer, image fi les may also be saved wit...

27 Displaying Photos in the Slide Show Specify the roll in the thumbnail display, and press the k button to start the slide show. Enlarging images When ZOOM is pressed during the slide show or while the slide show is paused, the currently displayed image can be enlarged up to two times its size.Each...

28 EDITING & DISC MANAGEMENT Editing Chapters A marker will be set every few minutes if the "Auto Chapter" function is activated in the "Recording" menu. This marker is known as a "chapter". These markers can be changed when the recording has fi nished. It is also possibl...

29 Editing Titles Editing Recording Titles (name) Some TV stations transmit the title (name) of a programme. In this case, the name will be included automatically (e.g. “ROCKY”). Otherwise, the channel number and time of the recording are stored as the name. The name of the recording can be changed ...

31 When you press SYSTEM MENU , the following menu will be displayed. In this menu, you can change various settings on the DVD recorder to suit your particular requirements. Video Sound Feature Language Recording Setup System Menu The above menu will be displayed by pressing SYSTEM MENU not only whi...

32 Audio Output Settings 1. Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.) 2. Press SYSTEM MENU to display the System Menu. 3. Select “Sound” using 8 or 2 , and press 6 once. The setting items at "Sound Options" on the ri...

33 Setting Item Explanation PBC Enable This function lets you activate or deactivate the PBC menu (Playback Control) for VCD only.When you press the k button to select this item, this feature is turned on. Each press of the k button toggles this feature on and off. Adapt Disc Format When you insert ...

34 Recording Settings 1. Turn the TV on and select input from the DVD recorder. (For details on operation methods, refer to your TV’s manual.) 2. Press SYSTEM MENU to display the System Menu. 3. Select “Recording” using 8 or 2 , and press 6 once. The setting items at "Recording Options" on t...

35 Setting Item Explanation Enter Code The passcode for setting parental level is required. (When the DVD recorder is shipped from the factory, no passcode is set. So, the passcode must fi rst be set.) Follow the procedure below to set the passcode.1) "Enter code" will be displayed. Enter a ...

36 TROUBLESHOOTING Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Solution The unit does not work im-mediately o button is pressed. - It takes time for power to be supplied after the o button has been pressed. - No solution. This unit needs tim...

38 MAINTENANCE Cleaning the cabinet Use a clean soft cloth moistened with plain lukewarm water and wrung dry. Never use benzol, benzene or other strong chemical cleaners since these could damage the fi nish of your unit. It is important that no liquid reaches the inside of the unit. SPECIFICATIONS P...

(UK) 1AD6P1P2109-- SANYO Electric Co., Ltd. GUARANTEE TO CUSTOMER Sanyo Europe Ltd. (the Company) guarantees to the initial retail purchaser that if this equipment is or becomes defective and that, in the opinion of the Company, the defect is due to faulty material or workmanship the Company will, f...