Sanyo CLT-A5832 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS

2 INTRODUCTION ................................................................................................. 4GETTING STARTED ......................................................................................... 5 Checking package contents .......................................................

Page 4 - Main Features; Superior Range; Other features; INTRODUCTION

4 Congratulations on your purchase of this SANYO cordless telephone.Your SANYO 5.8 GHz cordless telephone is a fine-quality home communicationsproduct. It is carefully designed and produced by a world leader of consumer andindustrial electronic equipment. With proper maintenance and care, it will pr...

Page 5 - GETTING STARTED; Installation tips

5 Modular jack You need an RJ11 type modular phone jack. If you do not have a modular jack, callyour local phone company to find out how to get one installed. Checking package contents Make sure your package includes the items shown here. GETTING STARTED Installation tips Some cordless telephones op...

Page 6 - Battery setup; RINGER; Connecting the base unit and charging the handset; CHARGE LED

6 Battery setup 1. Remove the battery compartment cover on the handset, insert the battery,plug the cord into the jack (inside the compartment) and replace the cover. 2. Set the handset RINGER switch to ON , and place handset in the base. S l i d e d o w n t h e b a t t e r y c o v e r P l a c e t h...

Page 7 - Telephone line connection; TEL LINE; Register handsets to the main base before use; line. When you place the handset in the main base, the handset will; To register the second handset for CLT-A5822 and CLT-A5832

7 Tone/pulse setting 1. If you have Pulse (rotary) service, you will need to set the dial mode to pulse. If you have Touch-Tone service, do nothing as your phone has been set toTone prior to shipment. If you do not know which type of service you have,contact your local telephone company. 2. To chang...

Page 8 - Handset; NAMES AND CONTROLS

8 Handset NAMES AND CONTROLS 1. Belt clip 2. REDIAL key 3. Headset jack 4. * TONE/EXIT key 5. MEM (memory) key 6. CH (channel)/DEL key 7. Charging contacts 8. Incoming call/in use LED 9. Earpiece 10. LCD screen 11. TALK key (also used to end a call) 12. MUTE/FORMAT key (MUTE/FORMAT/TRANSFER key) 13....

Page 9 - Base Unit

9 Base Unit NAMES AND CONTROLS Charger (For CLT-A5822 and CLT-A5832) 1. Handset Cradle 2. Page Key 3. Charge/In Use LED 4. Charge LED 5. Charging contacts 1 2 3 1 4 5 5 sy5822 10 april.p65 2006/5/12, ¤U¤È 02:52 9

Page 10 - Language setting; ENG 2 FRA 3 ESP; Area code setting; AREA CODE; Ringer tone; RINGER TONE 1; INITIAL PROGRAMMING

10 Before using this telephone, 4 initial settings must be completed on the handset:Language, Area code (this is required to use Caller ID service from your tele-phone company), Ringer tone, and Tone/Pulse setting. Language setting 1. Make sure the phone is OFF (not in TALK mode).2. Press FLASH/PROG...

Page 11 - Resetting to default; DEFAULT 1 NO; Receiving a call; TALK; BASICS

11 Resetting to default You can reset the phone programming to the initial factory default settings. Thedefault settings are: Language English Area Code - - - Ringer Tone 1 Tone/Pulse Setting Tone 1. Make sure the phone is OFF (not in TALK mode).2. Press FLASH/PROG repeatedly until “ DEFAULT 1 NO ” ...

Page 12 - Telephone Number; Channel No. Call Timer

12 Making a call 1. Press TALK . Note : If handset is in the base cradle, remove it from base before pressing the TALK key. 2. Dial the phone number. 3. Press TALK to end your call. Volume adjustment The VOLUME key adjusts the volume level of the earpiece. There are 4 volume levels.1. Make sure the ...

Page 13 - Changing the pre-dial number; Fast redialing; REDIAL; FLASH key

13 Pre-dialing (up to 32 digits) 1. Make sure the phone is OFF (not in TALK mode).2. Enter the telephone number. The number is displayed as you enter it.3. Press TALK . Note: Pressing *TONE will exit pre-dialing. Changing the pre-dial number 1. Make sure the phone is OFF.2. Enter the telephone numbe...

Page 14 - MUTE key

14 * TONE key This feature enables Pulse service phone users to access touch-tone servicesoffered by banks, credit card companies, etc.1. Dial the desired number.2. Press *TONE after your call is answered. 3. Follow the voice instructions to complete your desired action.4. Hang up when finished. The...

Page 15 - Caller ID with Call Waiting; CALLER ID FEATURES; Voice mail indicator; Call Timer

15 This phone receives and displays incoming call information transmitted by yourlocal phone company, provided you subscribe to Caller ID, and/or Call Waitingservices. This information can include the phone number and/or the name, dateand time. The phone can store up to 40 calls for later review. Ca...

Page 16 - Caller ID list; NEW; Reviewing Caller ID list; Formatting Caller ID numbers

16 Caller ID list The incoming caller information transmitted from the phone company is receivedby your phone between the first and second ring and stored in the Caller ID list. Ifyou answer a call before the second ring the caller information may not be stored. When the Caller ID list memory is ful...

Page 17 - Storing Caller ID entries in the directory; MEM; Dialing a Caller ID number; CID; Deleting entries from the Caller list

17 Storing Caller ID entries in the directory Before storing a caller ID number, make sure the number appears in proper digitsfor your dialing area. If not, change it using the MUTE/FORMAT key. For example, if the Caller ID number appears 1-416-222-5555 but it is not a long distance number, press MU...

Page 18 - DIRECTORY

18 Deleting all entries 1. Make sure the phone is OFF (not in TALK mode).2. Use the CID/VOL or keys to display any entry. 3. Press and hold CH/DEL , until “DELETE ALL?” shows on screen. 4. Press CH/DEL again to confirm. “NO CALLS” shows on screen. You can store up to 10 names (up to 15 characters) a...

Page 19 - Replacing a directory entry with a Caller ID entry; Changing a stored number; Making calls from the directory

19 and not a pause. Each pause counts as 1 digit in the dialing sequence. Oryou can store redial number in the directory by pressing REDIAL (Note: If the redial number is longer than 24 digits, it cannot be stored into the memory.). 8. Press MEM again to store the number to memory. If you are replac...

Page 20 - Chain dialing from the directory; Memory Location; Battery replacement and handling; CHANGING THE BATTERY

20 Chain dialing from the directory Use this feature to make calls that require a sequence of numbers such as usinga calling card for a frequently called long distance number. You can dial each partof the sequence from a different entry of the directory. The following exampleshows how you can use ch...

Page 21 - Make sure the telephone is off before you replace the battery.; to reset the digital security code.; POWER FAILURE

21 Make sure the telephone is off before you replace the battery. 1. Slide off the battery compartment cover.2. Disconnect the battery plug from the jack in the compartment and remove the battery pack. 3. Insert the new battery pack and connect the cord into the jack. Note: Please refer to the pictu...

Page 22 - HEADSET JACK AND BELT CLIP; Headset connection; HEADSET; Belt clip installation; LIGHT SIGNALS; INCOMING CALL/IN USE LED on the handset

22 HEADSET JACK AND BELT CLIP Headset connection (Headset not included) For hands free conversation, connect the headset(not included) to the HEADSET jack. The handset earpiece and microphone are disabled when theheadset is connected. Press TALK to answer or place a call while using the headset. For...

Page 23 - LCD SCREEN MESSAGES

23 LCD SCREEN MESSAGES The following indicators show the status of a message or of the phone. BLOCKED NUMBER/NAME/CALLERTRANSFERRING.. EMPTY ERROR ENTER NAMEENTER TEL NUMBRDELETE ALL? DELETE? END OF LIST HANDSET 1HANDSET 2PAGINGINCOMPLETE DATA MESSAGE WAITING NEW CALLNO CALLSNO DATAREPTUNKNOWN NUMBE...

Page 24 - SOUND SIGNALS; CALLER ID; TROUBLESHOOTING

24 SOUND SIGNALS A long warbling tone Signals an incoming call Single Tone A key is pressed Three short beeps Error tone Two long beeps Confirmation tone One short beep and one long beep Page signal Three beeps every 2 seconds Transfer signal Two short beeps every 15 seconds Low battery warning CALL...

Page 25 - TELEPHONE

25 • When you press a button from the keypad, you should hear the confirmation "beep" from the handset. Try dialling more slowly and ensure you hear beepsounds. If not try pressing the same number again. My handset(s) have static noise • Try re-registering the handset to the main base unit a...

Page 28 - MAINTENANCE

28 I am having difficulty in placing and/or receiving calls. • If you experience difficulty with placing or receiving calls, a lost security code may be the cause of the problem. When this occurs, the handset can nolonger communicate with the base. Reset by placing the handset on the basefor 5-10 se...

Page 29 - MAXIMIZE BATTERY PERFORMANCE; Charge it for a full 12 hours

29 MAXIMIZE BATTERY PERFORMANCE The freedom that your cordless telephone can offer is fully dependent on theperformance of the rechargeable battery in the handset. To maximize the batteryperformance, follow these guidelines: Charge it for a full 12 hours Before initial use of your new battery, charg...

Page 30 - TECHNICAL INFORMATION; CAUTION

30 TECHNICAL INFORMATION REN Number: The Ringer Equivalence Number (REN)assigned to each terminal’s deviceprovides an indication of the maximumnumber of terminals allowed to beconnected to a telephone interface. The REN number of this phone islocated on the bottom of the base unit.The termination on...

Page 32 - WARRANTY APPLICATION

32 Equipment Technical Specifications.This is confirmed by the registrationnumber. The abbreviation, IC, beforeregistration number signifies thatregistration was performed based ona Declaration of Conformity indicating TECHNICAL INFORMATION that Industry Canada technicalspecifications were met. It d...

Page 33 - SANYO COMFORT WARRANTY; WARRANTY BECOMES VOID; STATUTORY WARRANTIES

33 SANYO COMFORT WARRANTY ORIGINAL RETAIL PURCHASER’SRESPONSIBILITY You, the original retail purchaser, mustpresent your original, dated bill-of-sale together with this warranty toSANYO Canada Inc. or to an autho-rized SANYO Service Depot whenyou make a claim under this warranty. You, the original r...

Page 34 - NATIONWIDE CUSTOMER SUPPORT; Customer; HASSLE-FREE EXCHANGE; SOS HELP LINE

34 At SANYO, fulfilling the needs of our customers is a priority. That’s why wecreated our SOS customer service program that guaranteessatisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialistswill quickly answer your questions about setup ...