Sanyo AVL-2610 - Manuals - manualsarea.com

Page 2 - Table of Contents

Table of Contents Important Information .........................................................................................................................................................1 Important Safety Precautions ...............................................................................

Page 3 - CAUTION; -To reduce the risk of electric shock, do not perform any; FCC STATEMENT

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be...

Page 4 - Important Safety Precautions; the point where they exit from the apparatus.

Important Safety Precautions 2 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECT...

Page 5 - Lightning

Important Safety Precautions (continued) 3 12. Stand ---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the p...

Page 6 - WARNING

Important Safety Precautions (continued) 4 23.Panel protection ---The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 24.Pixel def...

Page 7 - Preparations; Speaker connection; Precaution on battery use; Batteries for the Remote Control; Open the battery cover.; Using the Remote Control; Cautions regarding use of remote control; Note; The illustration may be different depending on

Preparations 5 Speaker connection Precaution on battery use Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below. < Place batteries with their terminals corresponding to the (+) and (–) indications. < Different types of batte...

Page 8 - Antenna Connection; ANTENNAS; R F

Preparations (continued) CABLE TV (CATV) CONNECTION A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal.Some cable TV companies offer “premium pay channels”. Since the signals of the...

Page 9 - Power Indicator; Identification of Controls

Main unit (front view) Note: Functions of VOL+/- , CH+/- , MENU , SOURCE and POWER are also provided to the remote control. This operation manual provides a description based on operating functions with the remote control. 1. POWER 2. SOURCE To access signal source select menu 3. MENU Press this but...

Page 10 - Connect to the VGA /audio output sockets on your PC.; Speaker Output jacks

Identification of Controls (continued) Main Unit (rear view) 8 1. HDMI interface 2. VGA input/Audio in Connect to the VGA /audio output sockets on your PC. 3. COM port For service only. The user cannot operate the unit through the COM port. 4. Component inputs Connect to the component and audio outp...

Page 11 - Remote Control

Remote Control 1. POWER Turn the unit on or off 2 . SOURCE To access source select menu 3 . ADJUST To rectify the picture automatically in PC mode 4 . MUTE To temporarily mute the sound 5 . CH+/-( 5 / 6 ),VOL+/-( 3 / 4 ) , MENU CH+/-( 5 / 6 ) To select channels upward or downward; to move upward or ...

Page 12 - Cautions before connecting; Refer to the operating manual of the external device as well.; Connect a VCR; Video; VCR

Connections Connections Cautions before connecting Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or colour problems. Make sure that all conne...

Page 13 - Connect a Camcorder; Connections; To playback Camcorder

11 Connect a Camcorder Connections (continued) Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. How to connect: To playback Camcorder Note: The operations of the camcorder may be different and is dependant on your model. Please read the user manual of you...

Page 14 - Connect a DVD player or Set-Top Box; How to connect a DVD Player using Component Video Connections:; Rear of the DVD; DVD

Connections (continued) Connect a DVD player or Set-Top Box 12 Connect the Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Pb, Pr output jacks on the DVD player. Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD player. How to c...

Page 15 - Device with HDMI jack; Connect a HDMI; To Watch the PC screen; HDMI cable; To Play the Device

Connections (continued) 13 Device with HDMI jack H D M I O U T P U T Connect a HDMI device Connect a PC 1. Turn on your TV , press SOURCE button on the remote control. 2 . Press 5 or 6 repeatedly to select PC and press or to confirm. 3. Turn on your PC and check for PC system requirements.4. Adjust ...

Page 16 - Connect a VCR (for recording) or external amplifier; To record program; To enjoy high-quality sound through an external amplifier; VCR for recording; Rear of the VCR

Connect a VCR (for recording) or external amplifier Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. How to connect: 1. Turn on your TV, select a program you wish to record.2. Turn on your VCR, insert a videotape for recording.3. Press the Record button to begi...

Page 17 - Basic Operations; Turning the Unit On and Off; You can also use the; Viewing the Menus and Displays

Basic Operations Turning the Unit On and Off Turning On Turning Off With the power on, press the Power button on the remote control to turn off the unit. Note: You can also use the Power button on the Control panel on the main unit. After you turn off the television, you should wait for some seconds...

Page 18 - Changing Channels

Selecting Input Source Signal Press the SOURCE button to display the SOURCE menu . 112 PC -------Select signal from VGA jack. HDMI -------Select signal from HDMI terminal. TV --------Select TV signal. AV1 -------Select signal from AV IN 1 terminals. AV2 ----Select signal from AV IN 2 terminals. SVID...

Page 19 - Memorizing the Channels; Selecting the TV Source; Skipping Channels; Manual Fine Tuning; FINE TUNE

Memorizing the Channels Your TV can memorize and store all of the available channels. After the available channels are memorized, use CH+/- to scan through the channels. 17 Before you start AUTO SCAN , it is necessary to specify the type of signal source that is connect to the unit.(i.e., an antenna...

Page 20 - Setting Picture; Customizing the Picture; The Tint item is for NTSC system.; Freezing picture; STILL

Setting Picture Customizing the Picture Within the menu, use 5 , 6 , 3 or 4 to navigate or adjust. Press MENU button repeatedly to exit. Press MENU to display the menu PICTURE , and press 6 to access. 1 3 2 Notes: The PICTURE MENU is shown as an example. The menu options may be different when the un...

Page 21 - Customizing the Sound; Setting Sound

Option Function Choice/Remarks 4 : Higher volume from right speaker. 3 Higher volume from left speaker. : Sound Mode Bass Treble Balance AVC ( Auto Volume Control ) Selects sound mode. Adjusts Treble (high sounds) Adjusts Bass (low sounds) Adjusts volume balance (left and right volumes) User/Standar...

Page 22 - The above menu is shown as an example.; Setting Clock Time; Setting ON timer; Setting OFF timer; Setting Timer and System

Notes: The above menu is shown as an example. The menu items may be different when the unit works in different mode. Making use of this function can set the current time for the TV. 3 Press MENU button repeatedly to exit. 4 Setting Clock Time Press MENU to display the menu main page. 1 Press repeate...

Page 23 - Setting Sleep Timer

Setting Timer and System (continued) 21 Note: You may quickly set the sleep timer by using the SLEEP button on the remote control. Press MENU to display the menu main page. 1 Press repeatedly to select menu, and press to access. 3 or 4 FUNCTION 6 2 Press to SLEEP TIMER 5 or 6 repeatedly select item....

Page 24 - Viewing Closed Captions; Setting Closed Caption

Viewing Closed Captions This TV has the capability to decode and display Closed Captioned television programs. Closed Caption will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Note : The caption feature only works in TV, AV1,AV2 a...

Page 25 - NO ONE 17 AND UNDER ADMITTED.; Setting Parental Control; Parental Control

[1] Movie Rating (MPAA) Example 1: “PG-13” in the age-based rating is blocked, this will automatically block the higher ratings: “R”, “NC-17”, “X” also. “R” in the age-based rating is blocked, this will automatically block the higher rating: “NC-17”, “X” also. Note: The Movie rating is only age-base...

Page 27 - Password Setup

Setting Parental Control (continued) The Parental Control function enables parents to prevent their children from watching inappropriate programs on TV.To use Parental Control function, you first need to set your password. Press MENU to display the menu main page. 1 Press repeatedly to select menu, ...

Page 28 - CANADIAN FRENCH RATING CHART; CANADIAN ENGLISH RATING CHART; PG; Canadian English Rating Setup; PARENT; Canadian French Rating Setup

CANADIAN FRENCH RATING CHART E G 8 ANS+ 13 ANS+ 16 ANS+ 18 ANS+ Exempt - Exempt programming.General - Programming intended for audience of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately.8+ General - Not recommended for young children. Programming inte...

Page 29 - Adjusting On-Screen Display; Adjusting OSD Position

Adjusting On-Screen Display Press MENU to display the menu main page. 1 Press repeatedly to select menu 3 or 4 OSD , and press 6 to access. 2 Press repeatedly to select H-POSITION or V-POSITION . 5 or 6 OSD OSD 3 Adjusting OSD Position Press 3 or 4 to adjust the OSD position. 4 Adjusting OSD Halfton...

Page 30 - Adjusting the Picture; Customizing the Color Mode(Color Temperature)

Adjustment in PC (VGA)/YPBPR Mode 28 Adjusting the Picture 12 Within the menu, use 5 , 6 , 3 or 4 to navigate or adjust. 3 Press MENU button repeatedly to exit. Press MENU to display the menu PICTURE , and press 6 to access. Option Function Choice/Remarks Picture Mode Contrast Brightness Color Mode ...

Page 31 - Troubleshooting; Symptoms; Do not use in hot and cold rooms (locations)

Troubleshooting 29 Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms Check item = Check that the AC power cord is plugged into the mains socket. = Unplug the power cord, wait for 60 seconds. Then re-insert plug into the mains socke...

Page 32 - Care and Maintenance; LCD Display panel information; B. Do not display the fixed image for extended periods of time.; Cleaning and Maintenance

Care and Maintenance 30 LCD Display panel information The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time. Note: Impo...

Page 33 - Specifications; 00W 150W

31 Specifications Screen: 26” 32” Power supply: AC 100-240V,50/60Hz AC 100-240V,50/60Hz Power consumption: 100W 150W Unit Dimensions (WxHxD)( inch) 28.1X23.9X9.3 33.0X27.3X10.2 Weight: 41.8(lbs) 50.6(lbs) TV system & Channel coverage: System VHF UHF CATV NTSC-M 2-13 14-69 1-125 TV system: NTSC-M...