Samsung SSC21WEB - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFETY INSTRUCTIONS

Eng-2 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s...

Page 3 - CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

Graphic Symbol Explanation The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. T...

Page 4 - IMPORTANT SAFEGUARDS; Caution

Eng-4 IMPORTANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control switches are at the front of the monitor.) 1. Read Instructions : All the s...

Page 6 - Object and liquid Entry : Never push objects of any kind into this

Eng-6 13. Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges. 14. ...

Page 7 - have the same characteristics as the original parts.; Safety Check : Upon completion of any service or repairs to this; that the monitor is in proper operating condition.; FCC & ICES Information; Warning; digital device pursuant to part 15 of the FCC Rules and ICES-003 of; User-Installer Caution; responsible for compliance to part 15 of the FCC Rules.

Eng-7 18. Replacement Parts : When replacement parts are required be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire electric shock or other hazards. 19. Safety Check : U...

Page 8 - Information to user; the following two conditions: (1) this device may not cause harmful

Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC R...

Page 9 - IC Compliance Notice

Eng-9 The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA IC Compliance Notice This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C...

Page 10 - Contents; System Components and Installation; -4) CAMERA Composition and Connecting Method; MONITOR FRONT PANEL KEY Function and

Eng-10 Contents IMPORTANT SAFETY INSTRUCTIONS ...........................Eng-2 IMPORTANT SAFEGUARDS ..............................................Eng-4 FCC & ICES Information .......................................................Eng-7 Chapter 1: System Components and Installation 1-1) Environme...

Page 12 - Chapter 1: System Components and Installation; -1) Environmental requirements for installation and safety; malfunction and reduce system downs due to environmental causes.

Eng-12 Chapter 1: System Components and Installation 1-1) Environmental requirements for installation and safety This section describes the environmental requirements for safe installation and use. Install the product on a flat table or in a rack. It should be used only when level and should not be ...

Page 14 - -3) CAMERA composition and installation method; c. Camera fitting groove

Eng-14 1-3) CAMERA composition and installation method 1) Standard Camera composition (SOD14C) a. Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. b. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting...

Page 15 - It outputs the sound signal which was transfered from the monitor.

Eng-15 f. Speaker It outputs the sound signal which was transfered from the monitor. 2) INSTALLING STANDARD CAMERA (SOD14C) SOD14C s camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-110). Choose an installation site that can sufficiently support the weight of ...

Page 17 - Connect the camera cable to the camera.; Installation : Wall or Ceiling

Eng-17 • Loosen the handle by turning it in a counter clockwise direction and then adjust the camera position . Tighten the handle, turning it clockwise, and lock the camera in position. • Connect the camera cable to the camera. (3) Specifications Use : Indoor Installation : Wall or Ceiling Dimensio...

Page 18 - CAMERA to MONITOR through CAMERA CABLE (MCB-60) as shown in the below; Connection status checking method :; The initial screen mode of monitor is quad mode.

Eng-18 1-4) CAMERA Composition and Connecting Method to MONITOR After positioning monitor and installing four cameras to a desired location, please connect CAMERA to MONITOR through CAMERA CABLE (MCB-60) as shown in the below figure. Please check whether or not it is properly connected. Connection s...

Page 19 - ) External terminal connecting method for CAMERA

Eng-19 1-5) External terminal connecting method for CAMERA and MONITOR 1) External terminal connecting method for CAMERA • An additional PIR sensor or external sensor can also be connected. • The additional PIR sensor can be connected as shown in the above graphic. • Sensor’s trigger signal is NO (N...

Page 20 - -6) Whole System connection and configuration

Eng-20 f) Not Used g) Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR. h) Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR. i) Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR. j) Connect the G (...

Page 21 - Front Panel; ENTER

Eng-21 Chapter 2: MONITOR FRONT PANEL KEY Function and Using Method Front Panel 2-1) TALK KEY TALK KEY allows users to transmit voice signal to intended camera by inputting voice with built-in MIC in the front of the monitor. For this function, select a target camera with the œ œ ENTER √ √ SWITCH on...

Page 25 - ADJUST MENU function and setting method; Function: Allows adjustment to the display status

Eng-25 Chapter 3: Setting each item function at SETUP MENU Pressing the MENU BUTTON of the FRONT PANEL allows users to enter SETUP MENU and see the following menu OSD box. Setting method of each SETUP MENU function and operation is as follows. 3-1) ADJUST MENU function and setting method • Function:...

Page 26 - DWELL TIME MENU function setting

Eng-26 3-2) DATE/TIME MENU Function setting • Function: Sets the display date format and current time. • Setting method: Move to #2. DATE/TIME MENU by using œ œ ENTER √ √ SWITCH at setup menu, then press the ENTER SWITCH to display the OSD as shown in the below figure. (The figure shows the initial ...

Page 27 - If the time is set for each camera channel by using; SWITCH, each camera picture will be; DISPLAY MENU function setting; SWITCH at; screen according to status of NETWORK.

Eng-27 If the time is set for each camera channel by using œ œ ENTER √ √ SWITCH, each camera picture will be displayed for the set time and switched to the next picture automatically. 3-4) DISPLAY MENU function setting • Function: Allows users to select the color and ON/OFF of borderline at QUAD DIS...

Page 28 - TITLE MENU Function setting; Function: Set the title of each camera at your discretion.; SWITCH at SETUP MENU,; SWITCH then press the ENTER KEY to; SWITCH left or right, then press the

Eng-28 3-5) TITLE MENU Function setting • Function: Set the title of each camera at your discretion. • Setting method: Move to #5. TITLE MENU by using œ œ ENTER √ √ SWITCH at SETUP MENU, and press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting...

Page 29 - ALARM MENU Function setting; Function: Allows users to set the ALARM MODE for each camera.; SWITCH at SETUP

Eng-29 3-6) ALARM MENU Function setting • Function: Allows users to set the ALARM MODE for each camera. • Setting method: Move to #6. ALARM MENU by using œ œ ENTER √ √ SWITCH at SETUP MENU, and press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial sett...

Page 30 - NETWORK SETTING function and setting method; Static IP User; - Constituted by Static IP on the TCP/IP network

Eng-30 3-7) NETWORK SETTING function and setting method • Function: Allows users to select the STATIC (fixed) IP, DHCP, PPPoE of Setting. • Setting method: Move to #7, NETWORK SETUP MENU by using œ œ ENTER √ √ SWITCH at SETUP MENU, then press the ENTER SWITCH to display the OSD as shown in the figur...

Page 31 - CAUTION; A port number is reserved for TCP port and HTTP port setting.

Eng-31 5) After setting, move to the main screen by using the MENU BOTTOM. 6) Set values will be stored shown below. It takes 2 or 3 seconds. On completion of setting to Static IP(Fixed IP)setup, the screen, [S] is displayed. If the network connection is cancelled or cut, [S] starts blinking. Open y...

Page 32 - DHCP User; - Constituted by Dynamic IP on the cable/xDSL modem network; provide the configuration using DHCP.

DHCP User - Constituted by Dynamic IP on the cable/xDSL modem network You can use the SSC21WEB products through the network using Dynamic IP on cable/xDSL modem. In this case, it should be connected with DDNS to support the Dynamic IP. In case a user (EX : cable modem user) does not need ID and pass...

Page 34 - At this time, you should add “s” in front of “mac address”.

Eng-34 8) Open your Internet Explorer web browser, type in the following in the URL window and press Enter. http://sff0000.websamsung.net Where ff0000 is the MAC address of your SSC21WEB in this example. If your SSC21WEB’s MAC address is ff0001, then type in ff0001 instead of ff0000 * Note : MAC Add...

Page 35 - ) MOVE TO EACH item by using; Press ENTER SWITCH to set to PPPoE.

Eng-35 ADSL User (PPPoE) - Constituted by IP on PPPoE (ADSL) SSC21WEB products can be used on the network using IP through PPPoE (ADSL). In case of a user (EX : ADSL user) who needs ID and password of the communica- tions that he subscribes for in case of internet connection, the configurations usin...

Page 36 - Password, you can not see the image transferred from SSC21WEB.; IP and PASSWORD can be inputted to 40 characters in the maximum.

Eng-36 4) When the PPPoE (ADSL) type in the User Name and Password (and Confirm Password) given to you by the ADSL Service Provider. CAUTION In case of using ADSL (ISP-internet service provider, you must type correct User Name and Password by ISP to connect to SSC21WEB. If you type incorrect User Na...

Page 38 - more than 5 seconds and then try to connect again.; “Active X controls and plug-ins to run” screen.

Eng-38 CAUTION The connection to SSC21WEB is unavailable for about 2~5 minutes after ADSL Modem’s power ON. Since the connection would not be available, as IP is not received from ADSL commu- nications, please reboot by turning off the power of ADSL Modem and SSC21WEB for more than 5 seconds and the...

Page 40 - - Remote Viewer Function Buttons

Eng-40 3-8-1) “LIVE” MENU - CAMERA SELECT Initial display mode of monitor if QUAD A. - Remote Viewer Function Buttons KEY Type Function Choose a camera by channel Ch 1 ~ Ch 8 CHANNEL NEXT SINGLE MODE (1ch Default selected) 320 X 240 Size 720 X 480 QUAD MODE (QUAD Default selected) SEQUENCE MODE SAVE...

Page 41 - - SINGLE SCREEN DISPLAY

Eng-41 PLAY STOP LIVE MODE change ADMIN MODE change - SINGLE SCREEN DISPLAY In case users want to see the camera image at full mode, Select a target camera by turning camera select key. After that it’ selected camera image will be displayed at full screen. * AT SINGLE DISPLAY - QUAD MODE DISPLAY Use...

Page 46 - - Program screen configuration

Eng-46 - Program screen configuration - How to play 1. Play - back File - Open... Selecting this, you can choose one between fjp and jpg on a window as shown below. SSC21WEB-2 2004.8.25 6:31 PM Page 46

Page 50 - Type in the file name and press ‘Save’ to store it as a jpeg file.

- Snap shot It is a function to save the present image as a form of a jpeg file. Select in the toolbar. The result will be as follows. Type in the file name and press ‘Save’ to store it as a jpeg file. - Print It is a function to print the present image. Select in the toolbar. The result will be as ...

Page 51 - Select Print and press ‘OK’.

Eng-51 Type in the phrase you added in ‘Description’. Then press the ‘OK’ button. Select Print and press ‘OK’. SSC21WEB-2 2004.8.25 6:31 PM Page 51

Page 52 - Admin Menu; menu, you need the administrator’s ID and Password.; Admin Menu Entering; ) Click the Admin menu and a login window will appear.

Admin Menu It is an administrator’s menu to set the general items on SSC21WEB Server. To use this menu, you need the administrator’s ID and Password. On delivery, they are “root” (administrator’s ID) / “root” (administrator’s Password). The password can be changed on Admin Menu. Admin Menu Entering ...

Page 54 - Admin Menu Structure; Category

• Admin Menu Structure Eng-54 Category Main Menu System Configuration System Information Admin. Password Access Limitation User Registration Video Alarm Notification Network Configuration Network Configuration PPPoE (ADSL) Network Ports View Network Status Network Status Notification DDNS Configurat...

Page 55 - System Information

Eng-55 3-8-2) System Configuration Menu. 1. System Information In this menu, you can check the information on the system including the name of the SSC21WEB Server, its model name and the version of the model and change the name of the SSC21WEB Server. - Menu Configuration After completing setting, c...

Page 57 - Access Configuration

Eng-57 3. Access Configuration This menu is to set the targets the SSC21WEB Server can have an access to. - Menu Configuration After completing setting, click Apply button. If you click the back button, initial values are typed in all fields. Access Limitation This is to limit the maximum frame spee...

Page 60 - After completing setting, click Apply button.

Eng-60 5. Video Configuration This is to set the data to be added in the video data and set an environment for each channel. - Menu Configuration After completing setting, click Apply button. If you click the default button, initial values are typed in all fields. Image Size This is to choose the si...

Page 62 - image transfer in your mail account.

Eng-62 EX) When user who has an e-mail address ([email protected]) and password(123456) in YAHOO sets “Alarm Notification” in order to send a mail to [email protected]... After completing setting, click Apply button. If you click the back button, initial values are typed in all fields. In the event o...

Page 63 - Network Configuration

Eng-63 3-8-3) Network Configuration Menu. 1. Network Configuration On this menu, you can fix the general environment related to the network of the SSC21WEB Server and check the present status of it. - Menu Configuration 1) Fix the IP address of the SSC21WEB Server, NetMask, GateWay, DNS1, DNS2, etc....

Page 67 - Network Ports Configuration; ) The fault values is 80 and it can be assigned up to 65535 maximum.; where firewall constitutes or a particular port Etc.

Eng-67 3. Network Ports Configuration It sets the HTTP Port number to use when the SSC21WEB Server communicates with a Client PC. The present SSC21WEB Server uses HTTP Port (80). - HTTP Port 1) This is the port the Client PC uses to connect to the web page of the SSC21WEB Server. Depending on the en...

Page 70 - Type the address of the SMTP Server.; delivers it to the receiver.; Type the message you want to add in “User Defined Message”.

Eng-70 Choose to use the Mail Notification function or not. Choose “Enable” if you want to notify the network status of the SSC21WEB Server to the people who want through e-mails. Type the address of the SMTP Server. * SMTP Server plays a part as a relay that receives the mail of the user and delive...

Page 74 - Save Configuration; This menu is to save all of the present setting in the Flash Memory.

Eng-74 1. Save Configuration This menu is to save all of the present setting in the Flash Memory. If you changed any of the setting for the SSC21WEB, it is recommended that you save it in the Flash Memory in this menu. SSC21WEB-3 2004.8.25 6:45 PM Page 74

Page 78 - Click “Next” button to move to the next stage.

Eng-78 3. Click “Next” button to move to the next stage. Click “Skip” button to move to the next stage without Kernel Image’s update. Click “Next” button and a window will appear to check the name and size of the file. SSC21WEB-3 2004.8.25 6:46 PM Page 78

Page 81 - Click “Next” button to move to the next stage.

Eng-81 6. In the next stage, a pop-up window will appear for the file searching process for the System Image Update. Choose “Fw_2pq.tar.gz” in the browse. 7. Click “Next” button to move to the next stage. SSC21WEB-3 2004.8.25 6:47 PM Page 81

Page 85 - VIEW EVENT LOG MENU function and setting method; the next page by using; SWITCH. A Total of 64 events can be listed.

Eng-85 06/01/03 13:14:00 NO CH MM/DD/YY HH:MM:SS EVT 01 07 02/10/03 10:00:30 A 02 01 02/11/03 11:22:00 L 03 01 06/01/03 12:33:01 - 04 02 06/01/03 13:01:03 - 05 01 --/--/-- --:--:-- - 06 01 --/--/-- --:--:-- - 07 01 --/--/-- --:--:-- - 08 01 --/--/-- --:--:-- - 3-9) VIEW EVENT LOG MENU function and s...

Page 86 - Chapter 4: DISPLAY MODE setting method; full mode, select a target camera by turning; users turn the; SWITCH left / right at SINGLE DISPLAY MODE at this time,

Eng-86 Chapter 4: DISPLAY MODE setting method 4-1) SINGLE SCREEN DISPLAY Initial display mode of monitor is QUAD A. In case users want to see the camera image at full mode, select a target camera by turning œ œ ENTER √ √ SWITCH left and right. After that, press the ENTER SWITCH and selected camera i...

Page 87 - QUAD MODE DISPLAY; * At QUAD MODE display from SINGLE MODE or SEQUENCE MODE,

Eng-87 4-2) QUAD MODE DISPLAY Users can switch SINGLE DISPLAY MODE and SEQUENTIAL DISPLAY MODE to QUAD DISPLAY MODE, or QUAD A (QUAD B) to QUAD B (QUAD A), or PIP MODE to QUAD MODE, press the QUAD/PAGE KEY. * At QUAD MODE display from SINGLE MODE or SEQUENCE MODE, CH3 CH3 DISPLAY QUAD MODE DISPLAY o...

Page 88 - AUTO SEQUENTIAL DISPLAY MODE; * QUAD MODE SEQUENCE DISPLAY

Eng-88 4-3) AUTO SEQUENTIAL DISPLAY MODE Pressing on the SEQUENCE KEY on the front allows screen to automatically switch to SINGLE MODE full screen or QUAD MODE. (‘no-signal’ channels will be skipped while single screen is auto-switching.) If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds ...

Page 89 - PIP MODE DISPLAY; Can be used to see PIP screen in Single screen mode.; on PIP screen ,the main screen will change. If you press the; Sub-screen location can be selected on DISPLAY MENU in SETUP MENU.

Eng-89 4-4) PIP MODE DISPLAY Can be used to see PIP screen in Single screen mode. If you press the œ œ ENTER √ √ on PIP screen ,the main screen will change. If you press the œ œ ENTER √ √ to the left and right,the main screen can be transferred to another channel. Sub-screen location can be selected...

Page 91 - Chapter 5: Each product feature; SOD14C : Standard Camera

Eng-91 Chapter 5: Each product feature SOD14C : Standard Camera Model Name Broadcasting System Imaging Device Effective Pixels S Synchronization Resolution Signal Output S/N Ratio Minimum Scene Illumination Gamma Correction Lens Auto Exposure Audio I/O Connectors Operating Temperature Power Source P...

Page 93 - SSC21WEB NETWORK

Eng-93 SSC21WEB NETWORK • 32bit Embedded Processor • Flash Memory : 8Mbytes • SDRAM : 32Mbytes • HTTP, TCP/IP, FTP, Telnet, ARP, PPP, DHCP, PPPoE • Compression Algorithm : Real-time M-JPEG • Rate : 30 fps for each channel • Quality : 3 levels • NTSC • NTSC, 352x240, 704x240 • Max 30 Frame Per Second...

Page 94 - A unique MAC address is registered to this device.

Eng-94 The system performance may decrease if the computer has lower specification than the recom-mecdations, is not installed with the latest service pack, or has an illegally installed operationsystem(OS). A unique MAC address is registered to this device. If the administrator setting and monitori...

Page 95 - Appendix A) Software up data; The initial screen of Samsung Electronics’ web site is as follows.

Eng-95 Appendix A) Software up data The initial screen of Samsung Electronics’ web site is as follows. 1. http://www.securitysamsung.com http://www.samsung.com/Products/CCTV.htm 2. Network Security in Homepage 3. Download the following items from SSC21WEB. ! Owner’s manual - SSC21WEB Owner’s manual ...

Page 96 - Appendix B) IP Router Setup Guide; List of Routers compatible with SSC21WEB.; Total System Configuration; Other routers may be incompatible with SSC21WEB.

Eng-96 Appendix B) IP Router Setup Guide List of Routers compatible with SSC21WEB. Refer to Router User’s Manual for the detailed router setup. 1. Total System Configuration 2. Local System Configuration 3. Step-by-Step Examples : Linksys (Model : WRT54G) Netgear (Model : WGR614v4) D-Link (Model : D...

Page 97 - Total System Configuration

Eng-97 Total System Configuration SSC21WEB-3 2004.8.25 6:48 PM Page 97

Page 98 - Local System Configuration; Local PC to use during setup.

Eng-98 Local System Configuration 1. Connect LAN cable of Cable/ADSL modem or Direct Fixed/Static IP LAN Line to WAN port of IP Router. 2. Connect LAN ports of IP Router(1~4 or 1~8) to Ethernet port SSC21WEB to be set up and to Ethernet port of Local PC to use during setup. 3. Connect Video cable of...

Page 99 - Linksys model WRT54G

Eng-99 Step-by-Step Setup Example of IP Router Linksys model WRT54G 1. Click the “Application and Gaming” tab. 2. Click “Port Range Forward”. 3. Port forwarding Row #1 : ! Application : Set this to “HTTP” @ Start and End : Set both to “From 10000 to 65535” # Protocol : Select “TCP” $ IP Address : SE...

Page 103 - Printed in Korea

Samsung CCTV dba GVI2801 Trade Center Drive. Suite 120Carrollton, TX 75007Toll Free : 888-595-2288 Part No.: A A 6 8 - 0 3 5 0 9 A Printed in Korea SSC21WEB-cover 2004.8.25 6:23 PM Page 1