Samsung SSC14WEB - Manuals - manualsarea.com

Page 6 - Object and liquid Entry : Never push objects of any kind into this

Eng-6 13. Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges. 14. ...

Page 7 - have the same characteristics as the original parts.; Safety Check : Upon completion of any service or repairs to this; that the monitor is in proper operating condition.; FCC & ICES Information; Warning; digital device pursuant to part 15 of the FCC Rules and ICES-003 of; User-Installer Caution; responsible for compliance to part 15 of the FCC Rules.

Eng-7 18. Replacement Parts : When replacement parts are required be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire electric shock or other hazards. 19. Safety Check : U...

Page 8 - Information to user; the following two conditions: (1) this device may not cause harmful

Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC R...

Page 9 - IC Compliance Notice

Eng-9 The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA IC Compliance Notice This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C...

Page 10 - Contents; Cha; -4) CAMERA Composition and Connecting Method

Eng-10 Contents IMPORTANT SAFETY INSTRUCTIONS ...........................Eng-2 IMPORTANT SAFEGUARDS ..............................................Eng-4 FCC & ICES Information .......................................................Eng-7 Cha p ter 1: System Components and Installation 1-1) Environ...

Page 11 - SSC

Eng-11 Chapter 3: Setting each item function at SETUP MENU 3-1) ADJUST MENU function and setting method .............Eng-253-2) DATE/TIME MENU Function setting..........................Eng-263-3) DWELL TIME MENU function setting .......................Eng-263-4) DISPLAY MENU function setting ..........

Page 12 - Chapter 1: System Components and Installation; -1) Environmental requirements for installation and safety; malfunction and reduce system downs due to environmental causes.; Caution

Eng-12 Chapter 1: System Components and Installation 1-1) Environmental requirements for installation and safety This section describes the environmental requirements for safe installation and use. Install the product on a flat table or in a rack. It should be used only when level and should not be ...

Page 14 - -3) CAMERA composition and installation method; c. Camera fitting groove

Eng-14 1-3) CAMERA composition and installation method 1) Standard Camera composition (S OD14 C) a. Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. b. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitti...

Page 17 - Connect the camera cable to the camera.; Installation : Wall or Ceiling

Eng-17 • Loosen the handle by turning it in a counter clockwise direction and then adjust the camera position . Tighten the handle, turning it clockwise, and lock the camera in position. • Connect the camera cable to the camera. (3) Specifications Use : Indoor Installation : Wall or Ceiling Dimensio...

Page 18 - CAMERA to MONITOR through CAMERA CABLE (MCB-60) as shown in the below; Connection status checking method :; The initial screen mode of monitor is quad mode.

Eng-18 1-4) CAMERA Composition and Connecting Method to MONITOR After positioning monitor and installing four cameras to a desired location, please connect CAMERA to MONITOR through CAMERA CABLE (MCB-60) as shown in the below figure. Please check whether or not it is properly connected. Connection s...

Page 19 - ) External terminal connecting method for CAMERA; RV; ) VCR or ALARM terminal connecting method

Eng-19 1-5) External terminal connecting method for CAMERA and MONITOR 1) External terminal connecting method for CAMERA • An additional PIR sensor or external sensor can also be connected. • The additional PIR sensor can be connected as shown in the above graphic. • Sensor’s trigger signal is NO (N...

Page 20 - -6) Whole System connection and configuration

Eng-20 f) Not Used g) Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR. h) Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR. i) Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR. j) Connect the G (...

Page 21 - Front Panel

Page 23 - key, it allows users to

Eng-23 Eng-23 Eng-23 2-5) SEQ / PIP - KEY It makes a picture switch sequentially. This means that display the picture will be displayed during theDWELL TIME pre-set at the DWELL MENU of SETUP MENU, and switch the picture automaticallyas a pre-set sequence. Please refer to Chapter 3. DWELL TIME MENU ...

Page 25 - -1) ADJUST MENU function and setting method

Eng-25 Chapter 3: Setting each item function at SETUP MENU Pressing the MENU BUTTON of the FRONT PANEL allows users to enter SETUP MENU and see thefSETUP MENU is available only in QUAD MODE. ollowing menu OSD box. Setting method of each SETUP MENU function and operation is as follows. 3-1) ADJUST ME...

Page 26 - Sets the display date format and current time.; Setting method of date display format; at SEQUENTIAL DISPLAY MODE.

Eng-26 06/01/03 13:14:00 DATE TYPE MM/DD/YY DATE 06 / 01 / 03 TIME [HH:MM:SS] 13 : 14 : 00 DATE/TIME SETTING 06/01/03 13:14:00 CAM1 03 SEC CAM2 03 SEC CAM3 03 SEC CAM4 03 SEC CAM5 03 SEC CAM6 03 SEC CAM7 03 SEC CAM8 03 SEC QUAD-A 03 SEC QUAD-B 03 SEC DWELL TIME SETTING 3-2) DATE/TIME MENU Function s...

Page 30 - -7) NETWORK SETTING function and setting method; Move to #7, NETWORK SETUP MENU by pressing KEY at SETUP MENU,; Static IP User; - Constituted by Static IP on the TCP/IP network; by using

Eng-30 3-7) NETWORK SETTING function and setting method Function: Allows users to select the STATIC (fixed) IP, DHCP, PPPoE of Setting. Setting method: Move to #7, NETWORK SETUP MENU by pressing KEY at SETUP MENU, then press the KEY to display the OSD as shown in the figure below.(The figure shows t...

Page 31 - CAUTION; A port number is reserved for TCP port and HTTP port setting.

Eng-31 5) After setting, move to the main screen by using the VCR / ZOOM / MENU KEY . 6) Set values will be stored shown below. It takes 2 or 3 seconds. On completion of setting to Static IP(Fixed IP)setup, the screen, [S] is displayed. If the network connection is cancelled or cut, [S] starts blink...

Page 32 - DHCP User; - Constituted by Dynamic IP on the cable/xDSL modem network; You can use the SSC

Eng-32 DHCP User - Constituted by Dynamic IP on the cable/xDSL modem network You can use the SSC 14 WEB products through the network using Dynamic IP on cable/xDSL modem. In this case, it should be connected with DDNS to support theDynamic IP. In case a user (EX : cable modem user) does not need ID ...

Page 33 - at NETWORK ACCESS, then press KEY

Eng-33 06/01/03 13:14:00 DHCP ACCESS DNS 1 168.126.63.001 DNS 2 168.126.63.002 06/01/03 13:14:00 NETWORK SETTING [D] 13:14:00 CAM1 2) Move to "DHCP..." by pressing at NETWORK ACCESS, then press KEY SWITCH to set to DHCP. 3) DNS 1 and DNS 2 will be automatically set to DNS as shown below. Use...

Page 34 - At this time, you should add “s” in front of “mac address”.

Eng-34 8) Open your Internet Explorer web browser, type in the following in the URL window and press Enter. http://sff0000.websamsung.net Where ff0000 is the MAC address of your SSC 14 WEB in this example. If your SSC 14 WEB’s MAC address is ff0001, then type in ff0001 instead of ff0000 * Note : MAC...

Page 36 - and Password by ISP to connect to SSC; KEY; IP and PASSWORD can be inputted to 40 characters in the maximum.

Eng-36 4) When the PPPoE (ADSL) type in the User Name and Password (and Confirm Password) given to you by the ADSL Service Provider. CAUTION In case of using ADSL (ISP-internet service provider, you must type correct User Name and Password by ISP to connect to SSC 14 WEB. If you type incorrect User ...

Page 37 - 0) You can view the video source of the SSC

Eng-37 06/01/03 13:14:00 NETWORK ACCESSNETWORK STATUS IP ADDR 192.168.1.200 GATEWAY 192.168.1.65 SUBNETMASK 255.255.255.0 DNS 1 168.126.63.001 DNS 2 168.126.63.002 MAC ADDR 00:30:6f:ff00:00 At this time, you should add “s” in front of “mac address”. 10) You can view the video source of the SSC 14 WE...

Page 38 - The connection to SSC; WEB basic setting; ) Network Installation

Eng-38 CAUTION The connection to SSC 14 WEB is unavailable for about 2~5 minutes after ADSL Modem’s power ON. Since the connection would not be available, as IP is not received from ADSL commu- nications, please reboot by turning off the power of ADSL Modem and SSC 14 WEB for more than 5 seconds and...

Page 40 - - Remote Viewer Function Buttons

Eng-40 3- 8 -1) “LIVE” MENU - CAMERA SELECT Initial display mode of monitor if QUAD A. - Remote Viewer Function Buttons KEY Type Function Choose a camera by channel Ch 1 ~ Ch 8 CHANNEL NEXT SINGLE MODE (1ch Default selected) 320 X 240 Size 720 X 480 QUAD MODE (QUAD Default selected) SEQUENCE MODE SA...

Page 41 - - SINGLE SCREEN DISPLAY

Eng-41 PLAY STOP LIVE MODE change ADMIN MODE change - SINGLE SCREEN DISPLAY In case users want to see the camera image at full mode, Select a target camera by turning camera select key. After that it’ selected camera image will be displayed at full screen. * AT SINGLE DISPLAY - QUAD MODE DISPLAY Use...

Page 42 - - Auto SEQUENCY DISPLAY MODE; QU; - Motion Picture Recording and Playback

Eng-42 - Auto SEQUENCY DISPLAY MODE Pressing on the SEQUENCE KEY on the front allow to automatically switch to SIN- GLE MODE Full screen or QUAD MODE. If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds and the SE QU ENCY KEY is pressed at this time, the operation will be carried out as foll...

Page 45 - Player will be installed together when it is connected to SSC

Eng-45 3. PLAYER - Player installation/execution/deletion - Installation Player will be installed together when it is connected to SSC 14 WEB. - Execution (Follow the instruction to execute it separately.) Click Start Program —> SSC WEB Control —> Player. (Fig. 3- ! ) FIG.3 - Deletion Click St...

Page 46 - - Program screen configuration

Eng-46 - Program screen configuration - How to play 1. Play - back File - Open... Selecting this, you can choose one between fjp and jpg on a window as shown below.

Page 50 - Type in the file name and press ‘Save’ to store it as a jpeg file.

- Snap shot It is a function to save the present image as a form of a jpeg file. Select in the toolbar. The result will be as follows. Type in the file name and press ‘Save’ to store it as a jpeg file. - Print It is a function to print the present image. Select in the toolbar. The result will be as ...

Page 51 - Select Print and press ‘OK’.

Eng-51 Type in the phrase you added in ‘Description’. Then press the ‘OK’ button. Select Print and press ‘OK’.

Page 54 - Admin Menu Structure; Category

• Admin Menu Structure Eng-54 Category Main Menu System Configuration System Information Admin. Password Access Limitation User Registration Video Alarm Notification Network Configuration Network Configuration PPPoE (ADSL) Network Ports View Network Status Network Status Notification DDNS Configurat...

Page 55 - System Information

Eng-55 3- 8 -2) System Configuration Menu. 1. System Information In this menu, you can check the information on the system including the name of the SSC 14 WEB Server, its model name and the version of the model and change the name of the SSC 14 WEB Server. - Menu Configuration After completing sett...

Page 57 - Access Configuration

Eng-57 3. Access Configuration This menu is to set the targets the SSC 14 WEB Server can have an access to. - Menu Configuration After completing setting, click Apply button. If you click the back button, initial values are typed in all fields. Access Limitation This is to limit the maximum frame sp...

Page 60 - After completing setting, click Apply button.

Eng-60 5. Video Configuration This is to set the data to be added in the video data and set an environment for each channel. - Menu Configuration After completing setting, click Apply button. If you click the default button, initial values are typed in all fields. Image Size This is to choose the si...

Page 62 - image transfer in your mail account.

Eng-62 EX) When user who has an e-mail address (SSC 14 [email protected]) and password(123456) in YAHOO sets “Alarm Notification” in order to send a mail to [email protected]... After completing setting, click Apply button. If you click the back button, initial values are typed in all fields. In the event...

Page 63 - Network Configuration

Eng-63 3- 8 -3) Network Configuration Menu. 1. Network Configuration On this menu, you can fix the general environment related to the network of the SSC 14 WEB Server and check the present status of it. - Menu Configuration 1) Fix the IP address of the SSC 14 WEB Server, NetMask, GateWay, DNS1, DNS2...

Page 67 - Set the port be used when connecting to SSC

Eng-67 3. Network Ports Configuration It sets the HTTP Port number to use when the SSC 14 WEB Server communicates with a Client PC. The present SSC 14 WEB Server uses HTTP Port (80). - HTTP Port 1) This is the port the Client PC uses to connect to the web page of the SSC 14 WEB Server. Depending on ...

Page 70 - delivers it to the receiver.

Eng-70 Choose to use the Mail Notification function or not. Choose “Enable” if you want to notify the network status of the SSC 14 WEB Server to the people who want through e-mails. Type the address of the SMTP Server. * SMTP Server plays a part as a relay that receives the mail of the user and deli...

Page 74 - Save Configuration; This menu is to save all of the present setting in the Flash Memory.

Eng-74 1. Save Configuration This menu is to save all of the present setting in the Flash Memory. If you changed any of the setting for the SSC 14 WEB, it is recommended that you save it in the Flash Memory in this menu.

Page 81 - Click “Next” button to move to the next stage.

Eng-81 6. In the next stage, a pop-up window will appear for the file searching process for the System Image Update. Choose “Fw_2pq.tar.gz” in the browse. 7. Click “Next” button to move to the next stage.

Page 85 - -9) VIEW EVENT LOG MENU function and setting method; Displays the time and date of camera event and type of event.

Eng-85 Type of event happeningL : LOSSA : ALARM Sequence of event happening Time of event hap-pening Camera No. that event happened. Date of event happening 06/01/03 13:14:00 NO CH MM/DD/YY HH:MM:SS EVT 01 07 02/10/03 10:00:30 A 02 01 02/11/03 11:22:00 L 03 01 06/01/03 12:33:01 - 04 02 06/01/03 13:0...

Page 86 - Chapter 4: DISPLAY MODE setting method; full mode, select a target camera by turning

Eng-86 Chapter 4: DISPLAY MODE setting method 4-1) SINGLE SCREEN DISPLAY Initial display mode of monitor is QUAD A. In case users want to see the camera image at full mode, select a target camera by turning œ œ , √ √ KEY left and right. After that, press the KEY and selected camera image will be dis...

Page 87 - QUAD MODE DISPLAY; * At QUAD MODE display from SINGLE MODE or SEQUENCE MODE,

Eng-87 4-2) QUAD MODE DISPLAY Users can switch SINGLE DISPLAY MODE and SEQUENTIAL DISPLAY MODE to QUAD DISPLAY MODE, or QUAD A (QUAD B) to QUAD B (QUAD A), or PIP MODE to QUAD MODE, press the QUAD/PAGE KEY. * At QUAD MODE display from SINGLE MODE or SEQUENCE MODE,

Page 88 - AUTO SEQUENTIAL DISPLAY MODE; * QUAD MODE SEQUENCE DISPLAY

Eng-88 4-3) AUTO SEQUENTIAL DISPLAY MODE Pressing on the SEQUENCE KEY on the front allows screen to automatically switch to SINGLE MODE full screen or QUAD MODE. (‘no-signal’ channels will be skipped while single screen is auto-switching.) If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds ...

Page 89 - PIP MODE DISPLAY; KEY on

Eng-89 4-4) PIP MODE DISPLAY Can be used to see PIP screen in Single screen mode. If you press the œ œ , √ √ KEY on PIP screen ,the main screen will change. If you press the œ œ , √ √ KEY t o the left and right, the main screen can be transferred to another channel. Sub-screen location can be select...

Page 90 - KEY left and right, and press the KEY, then, the selected area

Eng-90 CH2 CH2 ➯ ➯ ➯ CH2 4-5) ZOOM MODE DISPLAY When users want to see zoomed image of a specific area of the display, press the ZOOMKEY in the front to display zoom selection area. Select zoom target area by turning KEY left and right, and press the KEY, then, the selected area will be displayed at...

Page 92 - Chapter 5: Each product feature; SOD14C : Standard Camera

Eng-9 2 Chapter 5: Each product feature SOD14C : Standard Camera Model Name Broadcasting System Imaging Device Effective Pixels SSynchronization Resolution Signal Output S/N Ratio Minimum Scene Illumination Gamma Correction Lens Auto Exposure Audio I/O Connectors Operating Temperature Power Source P...

Page 93 - OBSERVATION MONITOR (SSC; Video

Eng-9 3 OBSERVATION MONITOR (SSC 14 WEB) Video Input Video Output A u d i o Input A u d i o Output Alarm Features:Connected to AlarmBox/Camera SequenceEvent ListDisplay mode Horizontal ResolutionOperation TemperatureCRTDimension (W x D x H (mm))WeightPower consumptionVideo systemH044 0 0 9 109.37793...

Page 96 - Appendix A) Software up data; The initial screen of Samsung Electronics’ web site is as follows.

Eng-9 6 Appendix A) Software up data The initial screen of Samsung Electronics’ web site is as follows. 1. http://www.securitysamsung.com http://www.samsung.com/Products/CCTV.htm 2. Network Security in Homepage 3. Download the following items from SSC 14 WEB. ! Owner’s manual - SSC 14 WEB Owner’s ma...

Page 97 - Appendix B) IP Router Setup Guide; List of Routers compatible with SSC; Total System Configuration; Other routers may be incompatible with SSC

Eng-9 7 Appendix B) IP Router Setup Guide List of Routers compatible with SSC 14 WEB. Refer to Router User’s Manual for the detailed router setup. 1. Total System Configuration 2. Local System Configuration 3. Step-by-Step Examples : Linksys (Model : WRT54G) Netgear (Model : WGR614v4) D-Link (Model ...

Page 98 - Total System Configuration

Page 99 - Local System Configuration; WEB to be set up and to Ethernet port of

Eng-9 9 Local System Configuration 1. Connect LAN cable of Cable/ADSL modem or Direct Fixed/Static IP LAN Line to WAN port of IP Router. 2. Connect LAN ports of IP Router(1~4 or 1~8) to Ethernet port SSC 14 WEB to be set up and to Ethernet port of Local PC to use during setup. 3. Connect Video cable...

Page 100 - Linksys model WRT54G

Eng- 100 Step-by-Step Setup Example of IP Router Linksys model WRT54G 1. Click the “Application and Gaming” tab. 2. Click “Port Range Forward”. 3. Port forwarding Row #1 : ! Application : Set this to “HTTP” @ Start and End : Set both to “From 10000 to 65535” # Protocol : Select “TCP” $ IP Address : ...