Samsung SRF639GDLS - Manuals

6_ Safety information GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of the Samsung Refrigerator. We hope you enjoy the state-of-art features and effi ciencies that this new appliance offers. Selecting the best location for the Refrigerator • A location with easy access to...

02 OPERA TING 01 SETTING UP Setting up _7 • Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.• Do not install the Refrigerator where the temperature will go below 50 ºF (10 ºC). When moving your refrigerator To...

3. Remove the 3 hex head bolts 7 attached to the upper left and right door hinges with a wrench (10 mm). With a Philips head screwdriver, remove the ground screw 8 attached to the upper left and right door hinges. Remove the upper left and right door hinges 9 . 4. Lift the door straight up to remove...

02 OPERA TING 01 SETTING UP Setting up _9 ASSEMBLE THE FREEZER DRAWER To reattach the freezer drawer, assemble parts in reverse order. ADJUSTING THE DOORS Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make fi nal adjustments. If the R...

10_ Setting up 1. Locate the height-adjuster 1 in the freezer drawer. Unscrew the four Phillips screws 2 slightly to loosen the door. 2. Loosen the controller screw 3 with a Phillips screwdriver. 3. Find the best level to align the door slope. After adjustment, fi rst tighten screw 3 and then screw 2...

02 OPERA TING 01 SETTING UP Setting up _11 1. Slip the compression nut through the supplied plastic tubing . 2. Tighten the compression nut onto the 6.35 mm compression fi tting. - If you are using copper tubing, slip the compression nut (not included) and ferrule (not included) on copper tubing (not...

12_ Operating Operating the SAMSUNG refrigerator USING THE CONTROL PANEL Energy Saver Button For better energy effi ciency, press the Energy Saver button ( ). If condensation occurs on the doors, turn the Energy Saver function off. Freezer/ Hold 3 sec for Power Freezer Button Press the Freezer/Hold 3...

Operating _13 02 OPERA TING USING THE CONTROL PANEL Basic temperature of Freezer and Refrigerator Compartments The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments are -19 °C and 3 °C respectively.If the temperature of Freezer and Refrigerator Compartments ar...

14_ Operating Whenever all ice is used at one time, the above step 3 and 4 must be repeated (before dispense the fi rst 4 to 6 ice cubes, it needs waiting 8 hours). This will replenish the ice cubes and ensure maximum ice production. When you dump the ice from the ice bucket, you should press the dis...

Operating _15 02 OPERA TING USING THE COOL SELECT PANTRY™ The Cool Select Pantry™ is a full-width drawer with adjustable temperature control. This pantry can be used for large party trays, deli items, pizza, beverages or miscellaneous items. There is a temperature control which can adjust the amount...

16_ Operating 3. Vegetable & Fruit Drawers To remove - Pull the drawer out to full extension. Tilt up the front of the drawer and pull straight out. To relocate - Insert the drawer into the frame rails and push back into place. The drawers need to be removed before the glass shelf above them can...

18_ Troubleshooting Troubleshooting PROBLEM SOLUTION The Refrigerator does not work atall or it does not chill suffi ciently. • Check that the power plug is properly connected.• Is the temperature control on the display panel set to the correct temperature? Try setting it to a lower temperature.• Is ...

Memo DA99-03403A(0.5).indd 섹션3:19 DA99-03403A(0.5).indd 섹션3:19 2012.5.25 1:27:44 PM 2012.5.25 1:27:44 PM