Page 3 - safety information
safety information _03 SEVERE WARNING SIGNS FOR TRANSPORTATION AND SITE • When transporting and installing the appliance,care should be taken to ensure that no parts of the refrigerating circuit are damaged. Refrigerant leaking from the pipe work could - ignite or cause an eye injury. If a leak is d...
Page 6 - CAUTION SIGNS FOR USING
06_ safety information CAUTION SIGNS FOR USING • To get best performance from the product, Do not place foods too closely in front of the - vents at the rear of the appliance as it can obstruct free air circulation in the refrigerator compartment.Wrap the food up properly or place it in airtight - c...
Page 7 - Saving Energy Tips
safety information _07 SEVERE WARNING SIGNS FOR DISPOSAL • Leave the shelves in place so that children may not easily climb inside. Ensure that none of the pipes on the back of • the appliance are damaged prior to disposal.R-600a or R-134a is used as a refrigerant. • Check the compressor label on th...
Page 9 - FLOORING; LEVELLING THE REFRIGERATOR
setting up _09 01 SETTING UP Spacer Spacer Spacer Spacer Remove paper on spacer and then attach two spacers (Gray block) on the back side of refrigerator for better performance. Make sure two spacers fi x like below image when you install the refrigerator. It is improving the refrigerator performance...
Page 10 - Place the refrigerator in an appropriate location
10_ setting up Standtable Insert Insert Optional Standtable set base of refrigerator, when you use it you can not turn the adjusting leg. (There is no Standtable according to the model). SETTING UP THE REFRIGERATOR Now that you have your new refrigerator installed and in place, you are ready to set ...
Page 11 - Power Cool; Cool; Fridge
operating _11 02 OPERA TING operating the SAMSUNG refrigerator USING THE CONTROL PANEL (DISPLAY TYPE) Each time you press the button, a short beep will sound. 1 Power Cool When you press the 1. Power Cool button, the Indicator ( ) will light up and the refrigerator will speed up the time.This functi...
Page 12 - Adjusting the Freezer Temperature; set; Adjusting the Fridge Temperature; do not set; TWIST ICE MAKER; Making Ice Cubes
12_ operating CONTROLLING THE TEMPERATURE We recommend to set the temperature controller of the freezer and the refrigerator on Normal in order to have a stable performance of the appliance.When food in the refrigerator is frozen or if you want to increase the temperature of freezer, set the Freezer...
Page 13 - Lift up and pull out the water tank.
operating _13 02 OPERA TING Twist one of the levers fi rmly in the clockwise direction until the tray twists slightly.Result : The ice cubes fall into the storage bin.Repeat Step 2 for the other half of the tray, if necessary. Remove the storage bin by: Lifting it slightly • Pulling it towards you • ...
Page 16 - operating
16_ operating REMOVING THE REFRIGERATOR ACCESSORIES While assembling, put the freezer shelf, refrigerator shelves and cool pack in the correct position and do not put them upside down. It may cause a personal injury or material damage. Pull out the ice tray and box and then pull out 1. the right sid...
Page 17 - CLEANING THE REFRIGERATOR
operating _17 02 OPERA TING Pull it out while pressing the end of the sill on 6. the low temperature catalyzing deodorizer. Lift up and pull out the door guards. 7. Before removing any accessories, make sure that no food is in the way.When possible, remove the food altogether to reduce the risk of a...
Page 18 - Troubleshooting; PROBLEM
18_ Troubleshooting Troubleshooting PROBLEM SOLUTION The appliance is not operating at all or the temperature is too high. Check that the power plug is correctly connected. • Is the temperature control on the front panel correctly set? • Does sun shine on the appliance or are there heat sources near...
Page 19 - memo
memo DA68-02832A(EN)-0.4.indd 19 DA68-02832A(EN)-0.4.indd 19 2013.1.30 2:16:37 PM 2013.1.30 2:16:37 PM
Page 20 - Ambient Room Temperature Limits; Contact SAMSUNG WORLD WIDE; customer care center.
Ambient Room Temperature Limits This refrigerator is designed to operate in ambient temperatures specifi ed by its temperature class marked on the rating plate. Class Symbol Ambient Temperature range (°C) IEC 62552 (ISO 15502) ISO 8561 Extended Temperate SN +10 to +32 +10 to +32 Temperate N +16 to +...