Samsung SPH-I300 - Manuals

Samsung SPH-I300 – Manual in PDF format online.

Manuals:

Manual

Manual Samsung SPH-I300

Summary

Page 3 - Please read this guide before you use this equipment.

1 Please read this manual before operating yourphone, and keep it for future reference. Please read this guide before you use this equipment. This owner’s guide includes all the information necessary to make full use of your equipment’s advanced features. Professional Installation is strongly recomm...

Page 4 - Unpacking; microphone; Power cable; Mounting

2 Unpacking External speaker Hands-free microphone Power cable Mounting bracket Hands-free box Cradle Mounting clamshell I300handsfree.book Page 2 Wednesday, October 24, 2001 10:22 AM

Page 5 - Installation; Use the Hands-free Car Kit with a 12V battery.; If you want to use a battery voltage other than 12V,

3 Installation ,QVWDOODWLRQQRWHV • The installing location should provide both clear visibility of the phone LCD display and keypad and unobstructed access for the Hands-free Car Kit. • Care should be taken to position the microphone in a location which will be least susceptible to inter-ference cau...

Page 7 - free

5 4. Put the cradle on the lower clamshell. Adjust the mounting angle, and tighten the two large slotted screws. ,QVWDOOLQJWKH+DQGVIUHHER[ 1. Choose a suitable mounting location for the Hands-free box. • The location must not interfere with the driver’s safe operation of the vehicle. 2. Drill the pi...

Page 9 - Connect the data cable on the cradle to the

7 &RQQHFWLQJWKHFUDGOHWRWKH+DQGVIUHHER[ 1. Connect the data cable on the cradle to the ‘DATA’ terminal on the Hands-free box. 1 I300handsfree.book Page 7 Wednesday, October 24, 2001 10:22 AM

Page 11 - Do not place the speaker near the microphone.; Drill the pilot holes using a drill bit, and install the; Installation on the window or in front of cooling/

9 ,QVWDOOLQJWKHH[WHUQDOVSHDNHU The speaker is generally installed on the the passenger’s seat side. Note: Do not place the speaker near the microphone. Keeping the longest distance from the microphone will enhance voice quality. 1. Drill the pilot holes using a drill bit, and install the mounting br...

Page 13 - Using the Hands-free Car Kit

11 Using the Hands-free Car Kit &DOLEUDWLRQ The Hands-Free Car Kit needs to be set for the optimum calling condition. 1. Preparation for calibration • Connect the phone to the Hands-Free Car Kit as illustrated on page 13. • Turn off everything in your car that makes noise (radio, air conditioner...

Page 14 - If calibration is performed correctly, loud static and a; UHFDXWLRQV; Operating the Hands-free Car Kit; $WWDFKLQJWKHSKRQHWRWKHFUDGOH; To place the phone in the cradle:

12 Note: If calibration is performed correctly, loud static and a single beep will be heard from the speaker. This indicates that the calibration was successful. If calibration is unsuccessful, the speaker beeps constantly. If this occurs, repeat steps. 3UHFDXWLRQV • Never move the speaker and the m...

Page 15 - Enter the phone number. If the other party; DNLQJWKHSKRQHZKHQ\RXOHDYHWKHYHKLFOH; Press and hold the release buttons on both sides of

13 4. Enter the phone number. If the other party answers, begin the conversation. • You can speak using the Hands-free microphone and hear your caller through the speaker. • To adjust the speaker volume, press the volum con-trol button on the side of your phone. 7DNLQJWKHSKRQHZKHQ\RXOHDYHWKHYHKLFOH ...

Page 16 - Make sure the ignition switch is on.; If charging fails, the battery, the battery connectors or

14 %DWWHU\FKDUJLQJ To charge the phone’s battery you must do one of the following: • Keep your car running (recommended) • Make sure the ignition switch is on. Note: If charging fails, the battery, the battery connectors or the phone may be bad. Check the connections and then try installing the batt...

Page 17 - Using Voice Dial; This feature is only available in digital service areas.; Table 1: status of charging

15 Using Voice Dial To use Voice Dial, you need to “train” the phone to recognize your voice. You can put up to 20 names from your Address book into your Voice Dial list. Once you have recorded these names, you can make calls simply by speaking a name. Note: This feature is only available in digital...

Page 18 - The phone must be ON to make a Voice Dial call. If; once on

16 7UDLQLQJWKH+DQGVIUHH&DU.LW To train the Hands-free Car Kit for Voice Dial: 1. Train the phone for Voice Dial in Hand-held mode, as specified in your phone Owner’s Manual. 2. Place the phone in the cradle and wait for the voice and text prompts to guide you through the re-recording process. Th...

Page 19 - Call; You can also access the Voice Dial screen from the

17 • If the name is not recognized, the name is asked for again. • If the name is not recognized after two attempts, a message is displayed that says “Could not recog-nize name”. Try the call again later, or record the entry name again. 6HWWLQJXS9RLFH'LDO 1. From the Phone Menu, tap the Menu Launche...

Page 20 - Voice Dial

18 0DQDJLQJ\RXU9RLFH'LDO/LVW You can play the recorded name, re-record the name, or erase the recording. Play or Record: 1. From the Phone Menu, tap and select Calls. 2. Tap “Voice Dial List”.3. Select the name to edit and tap “Modify”.4. The Set Voice Dial screen is displayed. 5. Tap the drop down ...

Page 22 - Troubleshooting; The phone does not turn on, even though the

20 Troubleshooting The phone does not turn on, even though the Hands-free Car Kit is connected to it. • Check that the power cable of the Hands-free Car Kit is properly connected to the vehicle battery. You must turn on the vehicle ignition to supply power to the Hands-free Car Kit. • If power is no...