Samsung SPD-2300 - Manuals

Samsung SPD-2300 – Manual in PDF format online.

Manuals:

Manual

Manual Samsung SPD-2300

Summary

Page 2 - should conform to all local codes.; could void the user’s authority to operate the equipment.; CAUTION : To prevent electric shock and risk of fire hazards:; Do NOT use power sources other than that specified.

This installation should be made by a qualified service person and should conform to all local codes. The lightning flash with an arrowhead symbol, within an equilateral triangle isintended to alert the user to the presence of uninsulated “dangerous voltage”within the product's enclosure that may be...

Page 3 - Features; Various Auto Surveillances; Digital Flip; ENGLISH

ENGLISH Warnings & Cautions This information is provided to ensure your safety and to prevent any losses, financial orotherwise. Please read it carefully and use the product accordingly. Warning/Attention/Special Mark Messages Features Various Auto Surveillances *Individual Preset Saving Modes 1...

Page 4 - recautions; Contents

ENGLISH P recautions Body Camera Holder Camera Holder Connection Camera Holder Initial Setting 8 C omponents and Accessories 22 I nstallation 23 P art Names and Functions 10 10 11 12 13 OSD Menu Organization Dome Camera User Menu Settings 1. Camera Settings 2. Sequence Setting 3. P/T Setting 4. OSD ...

Page 5 - Precautions

SPEED DOME CAMERA SPEED DOME CAMERA User’s Manual User’s Manual 9 ENGLISH 8 ENGLISH Precautions Installation by unqualifiedpersons is not recommended. Experienced and skilled technicians have to installthis product. Unqualified and personal installationmay cause fire or electric shock. Contact the d...

Page 6 - Part Names and Functions; Body

SPEED DOME CAMERA SPEED DOME CAMERA User’s Manual User’s Manual 11 10 Function Setup Switch 1. Half/Full 2.3.4.5. RS-485/422 Terminal Setting 6. RS-485/422 Communication 7. Factory setting 8. RS-232 Controller Connection Input 1. RXD+ 2. RXD- 3. TXD+ 4. TXD- 5. GND 6. TX 7. RX ID Setup Switch Alarm ...

Page 7 - Camera Holder Connection; Protocol; Notes

SPEED DOME CAMERA SPEED DOME CAMERA User’s Manual User’s Manual 13 12 Camera Holder Connection Camera Holder Initial Settings Setting Communications Protocol Use the SW3 of installation bracket to set the communications protocol. SW1 Protocol Baud Rate(BPS) 0 Samsung 9,600 1 Samsung 19,200 2 Pelco-D...

Page 8 - EX: If the Camera ID is 1, set the ID number as; Setting Baud Rate Based on DVR Model (Camera Holder); Samsung

SPEED DOME CAMERA SPEED DOME CAMERA User’s Manual User’s Manual 15 ENGLISH 14 ENGLISH Setting Camera ID (Camera Holder) Set the Camera ID using 2 rotary switches (SW1and SW2). SW1 is the upper level switch and SW2 is thelower level switch. EX: If the Camera ID is 1, set the ID number as follows. Cam...

Page 10 - The following 3 Camera ID’s cannot be used.; Setting Transmission Mode (Camera Holder); • Factory Setting: OFF

SPEED DOME CAMERA User’s Manual 19 ENGLISH SPEED DOME CAMERA User’s Manual 18 The following 3 Camera ID’s cannot be used. Camera ID R-SW2 R-SW1 ID = 0 0 0 ID = 160 A 0 ID = 175 A F Function ON OFF SW3- #6 Factory Release RS-422 RS-485 Function ON OFF SW3- #1 Transmission Mode Full Duplex Half Duplex...

Page 11 - NAME; Set up the termination resistance in the dark products.; Controller Connection Terminal (Camera Holder)

SPEED DOME CAMERA SPEED DOME CAMERA User’s Manual User’s Manual 21 ENGLISH 20 NAME Purpose CON7- #1 RXD+ Controller Data Line Connection CON7-#2 RXD- Controller Data Line Connection CON7-#3 TXD+ Controller Data Line Connection CON7-#4 TXD- Controller Data Line Connection CON7-#5 GND GND CON7-#6 TX F...

Page 12 - The following products are provided separately.; Item; Power Adapter Cable; Components and Accessories; Accessories; • See pages 25 and 26 for product images.; Installation

SPEED DOME CAMERA SPEED DOME CAMERA User’s Manual User’s Manual 23 ENGLISH 22 ENGLISH Adapter AC24V, Peak 2.5A) User s Manual Camera Holder Terminal Block for Alarm Connection (12Pin) Terminal Block for Controller Connection (7Pin) 3 Screws for Fastening Camera Holder1 Screw for Fastening Cable The ...

Page 13 - First, connect one end of the BNC video; Cable Connection

SPEED DOME CAMERA User’s Manual 25 ENGLISH SPEED DOME CAMERA User’s Manual 24 1. First, connect one end of the BNC video cable connector to the Video OutputTerminal. 2. Next, connect the other end of the connector to the Video Input Terminal of the monitor. • Installation Precautions - Check out the...

Page 14 - Fasten the ceiling mount on the ceiling.; Connect the fan heater PCB cable inside the

SPEED DOME CAMERA User’s Manual 27 ENGLISH SPEED DOME CAMERA User’s Manual 26 3) Indoor and Outdoor Housing (STH-330PI, STH-330PO) This housing is used to install the speed dome camera on the indoor or outdoorwall or ceiling. (For the indoor type, the fan and heater are excluded.) 4) Wall Type Mount...

Page 15 - template, fastening the cable and screw provided separately.

SPEED DOME CAMERA User’s Manual 29 ENGLISH SPEED DOME CAMERA User’s Manual 28 5. Connect the heater and fan cables within the housing to the fan heater PCB. 8. Remove the camera dome cover and then attach the housing dome cover. 6. Adjust and make the arrows marked on the bottom of the camera body f...

Page 16 - OSD Menu Organization; Menu Organization; Menu; Functional Description

SPEED DOME CAMERA User’s Manual 31 ENGLISH SPEED DOME CAMERA User’s Manual 30 OSD Menu Organization Dome camera can be set up on the OSD (On Screen Display) menu displayedon the video monitor by the camera controller. The joystick operations in theOSD menu are as follows. In addition, sending contro...

Page 17 - Symbol Description

SPEED DOME CAMERA User’s Manual 33 ENGLISH SPEED DOME CAMERA User’s Manual 32 Symbol Description 1. Auto Run in the Sequence Mode - “A” symbol is flashing on the right top of the screen. 2. Motion Stabilization Stand-by Operation - “D” symbol is flashing on the right top of the screen. 3. Alarm oper...

Page 18 - Dome Camera User Menu Settings; Execution of OSD Menu :; Focus Mode; Magnification of the Digital Zoom can be selected among Off, 2X~10X.; FOCUS; Digital Zoom

SPEED DOME CAMERA User’s Manual 35 ENGLISH SPEED DOME CAMERA User’s Manual 34 Dome Camera User Menu Settings • Execution of OSD Menu : After checking if the camera is in manual operation mode, press the OSD Menukey or 1+MENU (SCC-16 Model). The following commands are displayed on themonitor screen. ...

Page 19 - Exposure; Camera exposure can be controlled.; on the amount of light.; White Balance

SPEED DOME CAMERA User’s Manual 37 ENGLISH SPEED DOME CAMERA User’s Manual 36 The White Balance function corrects the abnormal white colour into thenormal white colour under any colour temperature lighting. Select the mode among ATW, AWC and Manual. ATW is selected by default. Exposure Camera exposu...

Page 20 - and the bright and clear image can be maintained.; Back Light; OFF; • When you select the AGC mode as “OFF”, you cannot use the SSNR function.

SPEED DOME CAMERA User’s Manual 39 ENGLISH SPEED DOME CAMERA User’s Manual 38 Sens-Up Auto: The low light level of the night or dark condition is detected automatically and the bright and clear image can be maintained. Sens-Up Limit: Maximum accumulated magnification can be selected. Off: Sens-Up fu...

Page 21 - compared with the general illumination.; Others; camera settings menu.

SPEED DOME CAMERA User’s Manual 41 ENGLISH SPEED DOME CAMERA User’s Manual 40 COLOR : Output images are displayed in colour all the time. Burst signal size can be adjusted. B/W : Output images are displayed in black and white all the time. Burst signal can be kept or removed. AUTO : Under day condit...

Page 22 - : The overall colour density of the image can be adjusted.; Sequence Setting Menu; Preset Menu Setting

SPEED DOME CAMERA User’s Manual 43 ENGLISH SPEED DOME CAMERA User’s Manual 42 Image Adj. : Clarity of the video signal and saturation of the color may be adjusted. Sharpness : The overall sharpness of the image can be adjusted. Colour : The overall colour density of the image can be adjusted. Freeze...

Page 23 - To change the camera settings, select Edit; deleted. Up to 6 groups can be registered.

SPEED DOME CAMERA User’s Manual 45 ENGLISH SPEED DOME CAMERA User’s Manual 44 5. To change the camera settings, select Edit from the upper menu first. Select the item tochange, and then make the necessaryadjustments. 6. If you select the Scene Adj. item, such items as Shutter, AGC, SSNR, Sens-Up, Wh...

Page 24 - Zoom and Focus) are memorized and replayed.; sequence operation designated by the user will be executed.; • Press the OSD key to stop the internal memory to continue saving.

SPEED DOME CAMERA User’s Manual 47 ENGLISH SPEED DOME CAMERA User’s Manual 46 Tour : Group surveillance can be executed and set up and data can be deleted. Setting : The registered Group Sequence is selected with the joystick and confirmed with the Execution key. If the selected number is notregiste...

Page 25 - Pan Limit : The moving range in the Pan direction can be limited.; Area Setting : Areas can be indicated. Areas can be designated up to 8.

SPEED DOME CAMERA User’s Manual 49 ENGLISH SPEED DOME CAMERA User’s Manual 48 Pan Limit : The moving range in the Pan direction can be limited. Position : Moving range can be set up. Set the position from the left using the joystick and the Execution key. The stop position may change due to theiniti...

Page 26 - screen operation from the left.

SPEED DOME CAMERA User’s Manual 51 ENGLISH SPEED DOME CAMERA User’s Manual 50 Prop. P/T : Pan and Tilt speeds can be changed depending on zoom magnification. Tele will slow down the speed of Pan/Tilt and Wide will increase thePan/Tilt speed. It will take about 15 seconds for 1 cycle in Tele modeand ...

Page 27 - Edit; Preset Name

SPEED DOME CAMERA User’s Manual 53 ENGLISH SPEED DOME CAMERA User’s Manual 52 Edit : A maximum of 12 characters consisting of English (or Chinese, Japanese), numbers and special characters can be input for Camera Name. On/Off : The operation of this function is preset. Default setting is On. Preset ...

Page 28 - the alarm input of higher priority.

SPEED DOME CAMERA User’s Manual 55 ENGLISH SPEED DOME CAMERA User’s Manual 54 Functional Description Language : The OSD can be displayed either in English (default setting) or in Chinese. Main Menu Camera SettingSequence SettingP/T SettingOSD SettingAlarm SettingInitializeStatus OSD Setting Camera I...

Page 29 - ) Initialization Setting; Initialization Menu

SPEED DOME CAMERA User’s Manual 57 ENGLISH SPEED DOME CAMERA User’s Manual 56 ON/OFF : It can be set up how long the operation will be kept when the motion is detected. (1-59 sec, 1-59 min) Power On Reset : Camera is initialized into the original status of power input. MD Dwell Time : When the Motio...

Page 30 - Product Structure; Product Structure and Installation

SPEED DOME CAMERA User’s Manual 59 SPEED DOME CAMERA User’s Manual 58 Product Structure Installation Ø155 215.7 27.7 243.4 R75 *Other Installations: The outdoor installation accessories, which are sold separately, can be applied in various ways. (See 25 and 26 page for theaccessories on sale.) Produ...

Page 31 - Installation 1; Installation 2

Installation 1 SPEED DOME CAMERA User’s Manual 61 SPEED DOME CAMERA User’s Manual 60 Installation 2 Product Structure and Installation ENGLISH

Page 32 - Specifications

SPEED DOME CAMERA User’s Manual 63 ENGLISH SPEED DOME CAMERA User’s Manual 62 1/4” Colour Vertical Double Density Interline CCD. 410.000pixel NTSC 811(H) X 508(V) 768(H) X 494(V) 15.734kHz 59.94Hz Internal Sync/External Sync(AC Line Lock) 1.0p-p/75 Ω Higher than 50dB (AGC OFF) 520 TV Lines (Colour)/...