Samsung SNP-5430H - Manuals

English _5 ● over view Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.These servicing inst...

English _7 ● over view contentS oveRview 3 3 Important Safety Instructions 9 Product Features 10 Recomended PC Specifications 11 Recomended SD/Micro SD/ SDHC/SDXC Memory Card Specifications 11 NAS recommended specs 12 What’s Included 14 At a Glance (SNP-5430) 17 At a Glance (SNP-5430H) iNSTALLATioN ...

overview 8_ overview SeTup SCReeN 68 68 Setup 68 Basic Setup 85 Video & Audio setup 101 Network Setup 110 Event Setup 115 NAS (Network Attached Storage) guide 132 System Setup 138 Viewing profile information AppeNDix 139 139 DIP Switch Setting 149 Camera Wiring 150 Specification 155 Product Over...

English _9 ● over view proDuct featureS • HD video Quality • multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. • web Browser-based monitoring Using the Internet web browser to display the image in a local network envi...

overview 10_ overview recomenDeD pc SpecificationS • CPU : Intel Core 2 Duo 2.6 GHz or higher (for using 1280x1024 30 fps) Intel Core i7 2.8 GHz or higher (for using 1280x1024 60 fps) ` Web Plug-in is optimized to SSE 4.1 Instruction Set. • Resolution : 1280X1024 pixels or higher (32 bit color) • RA...

English _11 ● over view recomenDeD SD/micro SD/SDHc/SDXc memory carD SpecificationS • 4GB ~ 64GB • For your camera, we recommend you use a memory card from the following manufacturers: SD/Micro SD/SDHC/SDXC Memory Card : Sandisk, Transcend • For the framerate below 30 fps, it is recommended to use t...

overview 12_ overview wHat’S incLuDeD Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name Camera 1 SNP-5430 or SNP-5430H Instruction book, Installer S/W CD 1 Quick Guide (Optional) 1 Warranty card (Optional) 1 Cabl...

overview 14_ overview at a GLance (Snp-5430) appearance Item Description a Main unit Protects the internal PTZ mechanism from the direct sunlight or external impact. b Dome Cover Dome cover for the lens and unit protection. c Reset Button Pressing and holding this button for about 5 seconds will res...

English _15 ● over view Bottom view of installation Base Item Description a Alarm I/O Port Used to connect the alarm I/O cable. b Video Out Port Analog video output port. (for installation) c Audio Input Port Used to connect the audio input cable. d Audio Output Port Used to connect the audio output...

overview 16_ overview Item Description f Communications Ports Used for RS-485/422 communications. g ID Setup Switch Specify the camera ID. h Communications Setup Switch Set the transfer rate and protocols. i Network Connections You can use a PoE+ or an Ethernet cable to connect this terminal to the ...

English _17 ● over view at a GLance (Snp-5430H) appearance Item Description a Main unit Protects the internal PTZ mechanism from the direct sunlight, rain or external impact. b Dome Cover Dome cover for the lens and unit protection. c Safety Cable The cable prevents the product from dropping during ...

overview 18_ overview inside Item Description a SD Memory Card Compartment Compartment for the SD memory card. b Reset Button Pressing and holding this button for about 5 seconds will reset all camera settings to the factory default. c After Service Port (A/S port) This is for the repair purpose onl...

English _19 ● over view Bottom view of installation Base Item Description a Alarm I/O Port Used to connect the alarm I/O cable. b Video Out Port Analog video output port. (for installation) c Audio Input Port Used to connect the audio input cable. d Audio Output Port Used to connect the audio output...

English _21 ● in St aLL ation & connection installation & connection ` camera wiring interface Board For the camera wiring, please refer to the picture below. J ` Select Normal Open in the setup menu. - The sensor input is activated during a short for contact type, or when it is at “Low” lev...

installation & connection 22_ installation & connection connectinG witH otHer Device preparing adapter and cable J ` Connect the camera to the power adaptor. Then, plug the power cord of the adaptor to the wall outlet. Check out the rated voltage and current before making connections. Rated ...

English _23 ● in St aLL ation & connection electrical resistance of copper wire at [20°c (68°f)] Copper Wire Gauge (AWG) #24(0.22mm 2 ) #22(0.33mm 2 ) #20(0.52mm 2 ) #18(0.83mm 2 ) Resistance (Ω/m) 0.078 0.050 0.030 0.018 Drop Voltage (V/m) 0.028 0.018 0.011 0.006 Recommended Distance (m) Less t...

installation & connection 24_ installation & connection Connecting the installation monitor Connect the cable to the camera’s rear video output terminal and the installation monitor’s video input terminal. ` The wiring varies depending on your monitor type and peripheral devices; please refe...

English _25 ● in St aLL ation & connection inStaLLation preparing & installing camera Bracket For installation guidelines for brackets and housings, refer to the installation manual that is enclosed with the bracket or housing. ` available Bracket models Model Item SNP-5430 SNP-5430H SHP-370...

installation & connection 26_ installation & connection installing by surface attachment M ` SNP-5430H cannot be installed on the surface of a wall or ceiling. ` attaching template & installing installation base 1. Attach the provided template on the ceiling. Based on the template, drill...

English _27 ● in St aLL ation & connection ` connect terminal wires 1. Connect the cables to the terminal block on the hinged door. Refer to “ camera wiring interface Board ”. (page 21) 2. Once the wiring is complete, close the hinged door. J ` Do not connect the camera to a power outlet until t...

installation & connection 28_ installation & connection - To attach or detach the camera, refer to the picture. • Attaching the Camera : Push up the camera unit and rotate it clockwise until it cannot be rotated anymore, as shown in the figure. After rotation, fasten the screws assembled to ...

English _29 ● in St aLL ation & connection installing by wall mount ` fix the installation base with the bracket 1. Fix the base with the bracket by turning it clockwise. 2. As shown in the picture below, gently press and lift up the handle of the hinged door on the bottom of the installation ba...

English _31 ● in St aLL ation & connection notes for waterproofing This product is an indoor unit. If it is installed outdoors, use the outdoor housing to make it waterproof. ` installing the unit on the wall by combining the outdoor housing and wall mount 1. Install the wall mount on the vertic...

installation & connection 32_ installation & connection ` installing on the wall by combining the outdoor housing and ceiling mount adapter 1. Wrap the screw part of the housing with a sufficient amount of Teflon tape for assembly. 2. When separating the dome cover and fastening it to the ho...

English _33 ● in St aLL ation & connection • Wall mount (SBP-300WM) 2. If installing the camera on the ceiling • Ceiling Mount (SBP-300CM) 3. If installing the wall mount (SBP-300WM/SBP-300WM1) on an at least 80mm-long cylinder • Pole Mount (SBP-300PM)

installation & connection 34_ installation & connection 4. If installing the wall mount (SBP-300WM/SBP-300WM1) on a corner of the wall • Corner Mount (SBP-300KM) 5. If installing on a building rooftop • Parapet Mount (SBP-300LM) 6. If installing SNP-5430 outdoors • Outdoor Housing (SHP-3701H...

English _35 ● in St aLL ation & connection 7. If installing SNP-5430 on a ceiling as built-in component • Flush-Mount Indoor Housing for PTZ Dome Camera (SHP-3701F) 8. If installing SNP-5430 in the wall mount or ceiling mount • Hanging Mount (SBP-300HM3)

installation & connection 36_ installation & connection inSertinG/removinG a SD/micro SD memory carD J ` The following models support the following SD cards: (SNP-5430 : Micro SD card, SNP-5430H : SD card) ` Disconnect the power cable from the camera before inserting the SD/Micro SD memory c...

English _37 ● in St aLL ation & connection 2. Push the SD/Micro SD memory card in the direction of the arrow shown in the diagram. J ` Do not insert the SD/Micro SD memory card while it’s upside down by force. Otherwise, it may damage the SD/ Micro SD memory card. removing a SD/micro SD memory c...

installation & connection 38_ installation & connection memory carD information (not incLuDeD) what is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices....

English _39 ● networ K connection an D S etup You can set up the network settings according to your network configurations. connectinG tHe camera DirectLy to LocaL area networKinG connecting to the camera from a local pc in the Lan 1. Launch an Internet browser on the local PC. 2. Enter the IP addre...

40_ network connection and setup network connection and setup connectinG tHe camera DirectLy to a DHcp BaSeD DSL/caBLe moDem 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to...

English _41 ● networ K connection an D S etup connectinG tHe camera DirectLy to a pppoe moDem 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Us...

42_ network connection and setup network connection and setup connectinG tHe camera to a BroaDBanD router witH tHe pppoe/caBLe moDem This is for a small network environment such as homes, SOHO and ordinary shops. configuring the network settings of the local pc connected to a Broadband router Config...

English _43 ● networ K connection an D S etup ButtonS uSeD in ip inStaLLer Item Description a Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not currently implemen...

44_ network connection and setup network connection and setup Item Description g URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed. h IPv4 Scans for cameras with the IPv4 setting...

English _45 ● networ K connection an D S etup 3. In the < address > pane, provide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requires no user setting. M ` You can configure the static IP settings only if th...

46_ network connection and setup network connection and setup if using a Broadband router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The < Subnet mask > of the Broadband Route...

English _47 ● networ K connection an D S etup auto network Setup Run < ip installer_v2.XX.exe > to display the camera search list. At the initial startup, both [ auto Set ] and [ manual Set ] will be grayed out. M ` For cameras found with the IPv6 setting, these buttons will be grayed out as t...

48_ network connection and setup network connection and setup Dynamic ip Setup Dynamic ip environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHC...

English _49 ● networ K connection an D S etup port ranGe forwarD (port mappinG) Setup If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. manual port range forwarding 1. From...

50_ network connection and setup network connection and setup Setting up port range forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J ` If you d...

English _51 ● weB viewer web viewer connectinG to tHe camera normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:230:ab...

52_ web viewer web viewer to check the DDnS address If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server. If this is the case, you will not be ...

English _53 ● weB viewer LoGin Whenever you access the camera, the login window appears. Enter the User ID and password to access the camera. 1. Enter “ admin ” in the < user name > input box. The administrator ID, “ admin ”, is fixed and can not be changed. 2. Enter the password in the < p...

54_ web viewer web viewer inStaLLinG Stw webviewer pLuGin If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1. When the monitoring page is accessed for the ...

English _55 ● weB viewer 5. Click [ oK ]. The old version of Web Viewer Plug-in is deleted. 6. Click [ install ] to begin installation of the Web Viewer Plug-in. 7. Click [ finish ]. STW Web Viewer Plug-in installation is completed. J ` In your internet explorer, if you need to move to the installat...

56_ web viewer web viewer uSinG tHe Live Screen Item Description a Monitoring Move to the monitoring screen. b Playback Move to the screen where you can search for the video recording saved in your SD memory card or NAS. c Setup Move to the Setup screen. d Profile access information You can read the...

58_ web viewer web viewer to capture the snapshot 1. Click [ capture ( ) ] on the scene to capture. 2. When a captured video is saved, a notification message appears. When using Internet Explorer, the captured video is saved in My Computer / My Documents / Pictures. In Mac OS, it is saved in “~/Pict...

English _59 ● weB viewer to use audio 1. Click [ audio ( ) ] icon to activate audio communication. 2. Use [ ] bar to control the volume. M ` If there is no sound from pulling in and out the audio jack while it is in operation, click the [ Audio ( ) ] icon to enable it again. to control the ptZ 1. Pr...

60_ web viewer web viewer • : Run a saved tour. Refer to “ to configure the tour settings ” for details of tour setting. (page 83) • : Run a saved trace. Refer to “ to set the tracing function ” for details of trace setting. (page 83) • : Run a saved home position. Refer to “ to add the home positio...

English _61 ● weB viewer pLayinG tHe recorDeD viDeo M ` Before you can play the video, you must configure the record settings. For details on record settings, refer to “ Storage ”. (page 111) name of event search screen and its function Item Description a Search range setting Set the search date and...

62_ web viewer web viewer to play the content after searching by event 1. Click the [ playback ( ) ] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [ event search ] button. The search results will be di...

English _63 ● weB viewer name of time search screen and its function Item Description a Time bar The section in the specific period is played by moving the time bar. b Search date setting Set the search date using the calendar. ` If there is data saved in your SD memory card or NAS on the day, it is...

64_ web viewer web viewer Item Description h Video information Time data of the replayed video is displayed on the screen. i Backup Set the desired date to make a backup copy of video data saved in your SD memory card or NAS. ` Can be set as up to 5 minutes. to play after searching by time 1. Click ...

English _65 ● weB viewer 6. Move [ time bar ( ) ] to a desired time point of the video before playing it. The time containing a normal recoding file will be highlighted in blue; the time with the event recording will be highlighted in red. to back up the searched video 1. During playback, click [ ] ...

66_ web viewer web viewer to play an avi file J ` The following models support the following SD cards: (SNP-5430 : Micro SD card, SNP-5430H : SD card) (1) SD/micro SD memory card 1. Separate the SD/Micro SD memory card from the camera. J ` Before separating the SD/Micro SD memory card, set the < ...

English _67 ● weB viewer (2) naS (network-attached Storage)1. In Windows browser, use \\<ip address>\ to access. ex)\\192.168.20.31\defaultfolder\ch01\ img\2013_07_02\AVI 2. Go to < computer >  < network drive connection >  Enter 1. 3. Connected to the NAS. The directory structur...

68_ setup screen Setup You can configure the video & audio, network, event and system settings of the camera in the network. 1. In the Live screen, click [ Setup ( ) ]. 2. The Setup screen appears. J ` The setting page for preview video requires the STW web viewer plug-in to be installed on the ...

English _69 ● Setup Screen 4. Select each profile properties. For more details, refer to “ to add/change the video profile ”. (Page 71) 5. Click the input box of each item and enter / select a desired value. ` The context menu may differ depending on the selected codec type. • Default profile : If n...

setup screen 70_ setup screen • ATC sensitivity : Affect the transfer rate according to the variance in the network bandwidth. The transfer rate will be adjusted to the fastest if the bandwidth is < very high >, and adjusted to the latest if the bandwidth is < very low >. • ATC limit : I...

setup screen 72_ setup screen • Encoding priority : You can set the priority of video transmission to frame rate or compression. • GOV length : It specifies the distance (in terms of number of frames) between two consecutive I-Frames in a video sequence when H.264 codec was selected. (One I-Frame + ...

user 1. From the Setup menu, select the < Basic ( ) > tab. 2. Click < user >. 3. Provide the necessary user information. • Administrator password change : Change the password for the administrator. J ` For the security purposes, you are recommended to use a combination of numbers, alphab...

5. Type in each item in the Port menu as necessary. ` Neither the port range between 0 and 1023 nor port 3702 is available. • HTTP : HTTP port used to access the camera via the web browser. The default is 80(TCP). ` Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed ...

setup screen 78_ setup screen ptZ setup You can change the direction of lens and activate the zoom. 1. Select the < Basic ( ) > tab from Setup menu. 2. Click < ptZ setup >. 3. Click [▼ Show ]. 4. Click the cursor [ ] on the screen moving pad to control movement of the screen. • Move scre...

English _79 ● Setup Screen To add the home position 1. Move to a desired start screen point and press [ ]. The point will be set to the home position. 2. Click [ ] in the home position. You will move to the predetermined home position. 3. When the camera is rebooted after setting, the screen is loca...

setup screen 80_ setup screen To configure the detailed settings for the preset 1. Select the number of preset that you want to configure. 2. Click the < preset edit setup > tab. • Camera setup : You can change the camera setting to the environment of the selected preset. Refer to “ camera set...

English _81 ● Setup Screen To configure the swing settings Swing is a monitoring function that moves between two preset points and enables you to trace the motion. 1. Select < Swing > in < Sequence setup >. The menu screen will switch to the swing setting screen. 2. Select a swing settin...

setup screen 82_ setup screen To set a group The group function enables you to group various presets before calling them in sequence. Six groups can save a total of 128 presets each. 1. Select < Group > in < Sequence setup >. The menu screen will switch to the group setting screen. 2. Se...

English _83 ● Setup Screen To configure the tour settings The tour function enables you to call groups of your presets in sequence. 1. Select < tour > in < Sequence setup >. The menu screen will switch to the tour setting screen. 2. Configure the tour settings in detail. • Group No. : Se...

English _85 ● Setup Screen viDeo & auDio Setup video setup 1. From the Setup menu, select the < video & audio ( ) > tab. 2. Click < video setup >. 3. Select a < video source > mode. • Flip/Mirror : Displays the video from the camera upside down or reversely. • Digital Flip ...

setup screen 86_ setup screen to set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to < on >. 2. Select the color masking of desired privacy area. 3. When done, click [ apply ( ) ]. 4. Click [▼ Show ]. 5. Place the cursor at a p...

English _87 ● Setup Screen audio setup You can configure the I/O settings of the audio source from the camera. 1. From the Setup menu, select the < video & audio ( ) > tab. 2. Click < audio setup >. 3. Set the audio input value. • Source : Sets the audio input. - Line : Connect the c...

setup screen 88_ setup screen camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the < video & audio ( ) > tab. 2. Click < camera setup >. 3. Configure the settings as necessary of : SSDR, White bal...

English _89 ● Setup Screen white balance Setup You can correct the image colors based on white under any lighting conditions. 1. Select < white balance >. 2. Select < mode >. • ATW : Corrects the colors of the camera video automatically. ATW does not work under mercury/ sodium lamps. • M...

setup screen 90_ setup screen BLc Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select < Back light >. 2. Set < mode > to < BLc >. If you select BLC, the Box adjustment screen and the BLC box step are displayed on the P...

English _91 ● Setup Screen wDr Setup You can set to display a sharp image of the objects in a scene where both bright and dark areas exist. 1. Select < Back light >. 2. Set < mode > to < wDr >. 3. Select each item and set it properly. • WDR level : Specify the WDR sensitivity level...

setup screen 92_ setup screen ` For the best WDR performance, it is recommended to set the Iris mode to < Auto >. ` Since the auto focus operation can be repeated depending on the lighting condition if user backlight compensation is used, it is recommended to use the focusing mode of < One ...

English _93 ● Setup Screen Special Setup1. Select < Special >. 2. Select each item and set it properly. • DIS : Automatically compensates for the flicker on the screen. ` DIS cannot be used if VA/MD and tempering detection are used. ` Digital zoom cannot be used if DIS is used. • Day/Night : Y...

setup screen 94_ setup screen focus Setup1. Select < focus >. 2. Select each item and set it properly. • Mode - Manual : The focus will be adjusted manually according to the zoom factor. - Auto : The focus will be adjusted automatically according to the zoom factor. - One Shot AF : Auto Focus ...

English _95 ● Setup Screen oSD Setup1. Select < oSD >. 2. Select each item and set it properly. • Camera title : Specify whether or not to display the camera title on the screen. ` You can enter up to 15 characters for the title. • Camera title X, Y : Specify the coordinates where the camera t...

setup screen 96_ setup screen Smart codec Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the < video & audio ( ) > tab. 2. Click < Smart codec >. 3. Select ROI Area. • Manual : Sp...

English _97 ● Setup Screen pt limit You can specify restrictions on the pan or tilt function. 1. From the Setup menu, select the < video & audio ( ) > tab. 2. Click < pt limit >. 3. Decide if you want to limit the PT operations. If so, specify the details. • Mode : Select a mode to s...

English _99 ● Setup Screen To set the auto tracking area You can set up the area to be excluded from auto tracking objects. (You can set up to 8 non detection areas.) 1. Click [▼ Show ]. 2. Mouse-click on the image, and drag to set the desired area. 3. Enter name, and click [ oK ]. M ` Under the fol...

networK Setup DDnS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. J ` You can use the DDNS service only if the internet is connected. 1. From the Setup menu, select the < network ( )...

registering with DDnS to register your product with the Samsung DDnS1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select < DDnS Service > - < my DDnS >. 3. Click [ proDuct reGiStration ]. 4. Enter the product ID. ` Y...

ip filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the < network ( ) > tab. 2. Click < ip filtering >. 3. Select < filtering type >. • Deny : If selecting this, access from those IPs that are added to the filterin...

SSL You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the < network ( ) > tab. 2. Click < SSL >. 3. Select a secure connection system. ` To access the camera using HTTPS mode, you have to type the IP address for t...

802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the < network ( ) > tab. 2. Click < 802.1x >. 3. Set the < ieee 802.1x setting(eapoL using eap-tLS) >. • IEEE 802.1x : Specify the use of...

QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < network ( ) > tab. 2. Click < QoS >. 3. Click the [ add ( ) ] button. The IP list will be created. 4. Enter an IP address to which you will apply QoS. M ` The default...

• Enable SNMP Trap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generate...

event Setup ftp / e-mail You can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC if an event occurs. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < ftp / e-mail >. 3. Select < ftp configuration > or < e-...

• E-mail configuration - Server address : Enter the IP address of the email server that you transfer the alarm or event images to. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server. - Password : ...

alarm output 1. From the Setup menu, select the < event ( ) > tab. 2. Click < alarm output >. 3. Set the camera’s type of alarm output. ` If you change the alarm output type, the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed a...

alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < alarm input >. 3. Select the alarm input number. 4. Set whether or not to < enable >. 5. Select the type. • Normal open : It is normal...

time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < time schedule >. 3. Set whether or not to < enable >. 4. Specify the < transfer ...

tampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < tampering detection >. 3....

setup screen 124_ setup screen to use the motion Detection (mD) function1. Select the < motion detection > mode. 2. Select the sensitivity of separating movement from the background. You can select 5 levels of sensitivity (very low/low/normal/high/very high). 3. Select the size of the object f...

English _125 ● Setup Screen to use the intelligent video analysis (va) function1. Select the < video analytics > mode. 2. Select the sensitivity of separating movement from the background. You can select 5 levels of sensitivity (very low/low/normal/high/very high). 3. Select the size of the ob...

setup screen 126_ setup screen 4. Select the type of analysis. • Passing : The system detects the change in which an object passes the preset line. • Entering/Exiting : The system detects the change in which an object passes the preset area. • Appearing (Disappearing) : The system detects the change...

to set the video analysis rules ` passing 1. Set the type to < passing >. 2. Click the start and end point on the screen to set the base line. You can cancel the line while drawing an area by right-clicking the mouse. 3. Select the desired rule: • Right: Detects motions of moving from the left...

face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < face detection >. 3. Set whether or not to < enable >. 4. Select < Sensitivity > tab to set the sensitivity level. ` As the ...

audio detection You can set to detect sound over the specified level and trigger an event accordingly. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < audio detection >. 3. Set whether or not to < enable >. 4. Set the audio detection’s sound level. The lower the le...

auto tracking You can set the system to generate event signals when you activate the auto tracing function. 1. From the Setup menu, select the < event ( ) > tab. 2. Click < auto tracking >. 3. Specify the activation time and activation condition. ` For more information about < Activat...

SyStem Setup product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < product information >. 3. Check the camera information, or provide details according to your network environment. • Model : Model name of the product. • Serial number : Product serial numbe...

upgrade / reboot 1. From the Setup menu, select the < System ( ) > tab. 2. Click < upgrade / reboot >. 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default. - Except network parameter &a...

Log You can check the system log or event log. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Log >. 3. Select a log type. • System : You can check the system logs where any system changes are recorded including the time information. • Event : You can check the event l...

open SDK A user can install an application on their camera to execute additional functions. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < open SDK >. 3. Click the [ Browse ( ) ] button to select the *.cap file from the user folder. 4. Click the [ install ( ) ] button ...

viewinG profiLe information profile access You can check the profile information. 1. Click [ Status ( ) ] on the live screen. 2. The profile information screen is displayed. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec....

English _139 ● appen DiX appendix Dip SwitcH SettinG How to set up protocols and iD Dip Switches You can control various settings of the camera system using the Communication and ID DIP switches. Before installing the product, please set up the DIP switches according to the installation environment....

appendix 140_ appendix SW2 Pin No. Purpose 1~4 Protocol Settings 5~6 Baud Rate Settings 7 Transfer Method (RS-485/422) Settings 8 Termination Settings 1 9 Termination Settings 2 10 Reserved • protocol Settings Select a communication protocol for the camera. No. Protocol SW2-#1 SW2-#2 SW2-#3 SW2-#4 1...

English _141 ● appen DiX • baud Rate Settings Select the transfer speed of a selected communication protocol. No. Baud Rate (BPS) SW2-#5 SW2-#6 1 2400 ON ON 2 4800 ON OFF 3 9600 (Default) OFF OFF 4 19200 OFF ON • Communication Method Settings Select a communication method for the camera. Function ON...

appendix 142_ appendix camera iD Dip Switch Settings (Sw1) To set up camera IDs, refer to the “ camera iD chart ” next. • Camera iD Chart ID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 1 ON/OFF OFF OFF OFF OFF OFF OFF OFF 2 OFF ON OFF OFF OFF OFF OFF OFF 3 ON ON OFF OFF OFF OFF OFF OFF 4...

English _149 ● appen DiX camera wirinG control Signal connection • RS-485 Communications D+ D- TXD+ TXD- Camera Controller • RS-422 Communications D+ D- TXD+ TXD- TXD+ TXD- RXD+ RXD- Camera Controller communications cable For the camera to communicate with the controller, a RS-485/422 communications...

appendix 150_ appendix Specification Items Description SNP-5430 SNP-5430H Video Imaging Device 1/4” Progressive Scan CMOS Total Pixels 1392(H) x 1076(V), 1.49M Effective Pixels 1368(H) x 1049(V), 1.43M Scanning System Progressive Min. Illumination Color : 0.5 Lux (F1.4, 50IRE) B/W : 0.01 Lux (F1.4, ...

English _151 ● appen DiX Items Description SNP-5430 SNP-5430H Operational Camera Title Off / On (Displayed up to 15 characters) Day & Night Auto (ICR) / Color / B/W Backlight Compensation Off / BLC / HLC Wide Dynamic Range 120dB Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) ...

appendix 152_ appendix Items Description SNP-5430 SNP-5430H Operational Alarm events y File upload via FTP and E-Mail y Notification via E-Mail, TCP and HTTP y Local storage(SD/SDHC/SDXC) or NAS recording at Network disconnected & Event (Alarm Triggers) y External output Network Ethernet RJ-45 (...

English _153 ● appen DiX Items Description SNP-5430 SNP-5430H Network Security HTTPS(SSL) Login AuthenticationDigest Login AuthenticationIP Address FilteringUser access Log802.1x Authentication Streaming Method Unicast / Multicast Max. User Access 15 users at Unicast Mode Memory Slot SD/SDHC/SDXC (S...

English _155 ● appen DiX proDuct overview ` Snp-5430 Unit : mm (inch) Ø152(5.98) Ø133.2(5.24)

English _157 ● appen DiX trouBLeSHootinG PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camer...

open Source announcement GpL/LGpL software license The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending ema...

SALES NETWORK SAMSUNG TECHWIN CO., LTD. 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity.com SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Fre...