Samsung SNP-3300 - Manuals

Note to User 5 Note to User This machine’s electromagnetic waves have been registered as suitable for business purposes; the retailer and consumer should be aware of this registration. If in the case of wrongful purchases, please exchange the product for a home use product. Correct Disposal of This ...

Product Warranty and Limitations 7 Product Warranty and Limitations The manufacturers of this product do not take any responsibility for this product; therefore, the manufacturer does not authorize the third-party, but allows that retailer is responsible. The product warranty does not extend to cove...

30X PTZ Network Camera SNP-3300 8 Warning Symbols Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Danger : Misuse or wrongful operation of the product may result in death, injury or bring about other fatal results. I...

Danger 9 y There is risk of shock or fire; be sure to avoid setup in places with high humidity. y To prevent shocks, please connect the ground wire. y Do not install the camera on a surface that can not support it. y Unless the surface is suitable, it could cause falling or other hazards. During Use...

30X PTZ Network Camera SNP-3300 10 y Random replacement of built-in battery by other types of batteries may cause explosion. The battery shall be replaced by the same battery. The used batteries shall be disposed carefully because they can cause environment pollutions. y The battery shall be replace...

1.1. 30X PTZ Network Camera SNP-3300 Introduction 13 1.1. 30X PTZ Network Camera SNP-3300 Introduction The SNP-3300 is a high-tech network camera that uses MPEG-4 codec technology to allow high compression rates and clear picture quality by allowing for high frame rates to be transmitted through the...

30X PTZ Network Camera SNP-3300 14 visual fatigue of observers. • Various Protocols Five different makers protocols are supported: Samsung Techwin, Pelco, Samsung Electronics, Panasonic and Vicon. • PTZ Tracking 4 patterns operated with the joystick can be saved and replayed by users. • Auto Swing P...

2.1. Body 17 2.1. Body ① POWER Switch Power ON/OFF. (Factory setting : OFF)

30X PTZ Network Camera SNP-3300 20 Alarm Connection Terminal(Camera Holder) NAME Purpose UP3-#1 IN1 Alarm input sensor connection terminal1 UP3-#2 IN2 Alarm input sensor connection terminal2 UP3-#3 GND GND UP3-#4 IN3 Alarm input sensor connection terminal3 UP3-#5 IN4 Alarm input sensor connection te...

30X PTZ Network Camera SNP-3300 22 3.1. Connecting to Monitor (For installation) Please connect the video output terminal located on the back of the camera to the monitor. 30X PTZ Network Camera SNP-3300 Monitor y The connection method varies depending on the type of monitor and accessories. Please ...

3.1. Connecting to Monitor (For installation) 23 Caution ƒ This product is the network camera which transmits video through network, video output terminal is for installation and used to determine imaging range when installing the product. ƒ It could have a trouble, like a falling-off in video quali...

30X PTZ Network Camera SNP-3300 24 3.2. Connecting to Power AC24V 2.5A can be used for the input power of this product. Connect the Power Adapter Cable. Use a driver (-) to screw one part of the Power Adapter consisting of two lines to the holder. Connect the Power Adapter’s plug to the Power Outlet...

30X PTZ Network Camera SNP-3300 32 Caution ƒ Check out the input voltage of the power adapter before connecting the power. ƒ For an installation without housing, the camera can be installed with installation template, fastening the cable and screw provided separately. ƒ It is necessary to tighten th...

3.4. Network configuration and connection method using Web page 33 3.4. Network configuration and connection method using Web page Use when there is one 30X PTZ Network Camera SNP-3300 to be installed. 1. Please connect user’s PC to 30X PTZ Network Camera SNP-3300 using cross cable. Note To configur...

3.4. Network configuration and connection method using Web page 37 ① LAN / xDSL/ DHCP Configuration Item Description LAN Use When network product is connected to normal local LAN or when connected to static IP, the network data to be allotted to the IP is configured. xDSL When using xDSL dynamic IP,...

4.1. How to Use Web Viewer 41 4.1.2. Web Viewer screen Web Viewer screen is composed of menu area for camera/video configuration and screen area for displaying input video from camera. „ Controls Flip Image Vertical reversal of channel screen

4.1. How to Use Web Viewer 43 Pause Stops video for a while. OSD Displays related information. Displays the title Removes the title

30X PTZ Network Camera SNP-3300 44 Deinterlace On/off function of Deinterlace. Screen where Deinterlace is not applied Screen where Deinterlace is not applied Note Deinterlace is a function to adjust the video quality softly by eliminating the border line which was made by an interlace function. The...

4.1. How to Use Web Viewer 45 Camera Setup Displays OSD control button of camera. Camera OSD control button is displayed Camera OSD is displayed Day&Night Day&Night configuration function (Color, B/W configuration) PTZ Control PTZ control function Screen where camera PTZ control window is di...

30X PTZ Network Camera SNP-3300 46 Note The left/right slide bar can control focus (left slide bar) / zoom (right slide bar) The “+” displayed in the middle can be pressed using the mouse as the base point of the Pan / Tilt and it will Pan /Tilt according to that point. Instruction for Camera OSD co...

4.2. Using Administration page 47 4.2. Using Administration page 4.2.1. Initialization Screen after Connecting When connection is successful, the below screen will be displayed.

30X PTZ Network Camera SNP-3300 48 4.2.2. Live Please Move to Web Viewer page [Web Viewer live screen]

4.2. Using Administration page 49 4.2.3. Basic Configures basic information for camera. Video/Audio Setup Item Description Compression Video compression mode (Compression mode of video in the camera) Video Size If the type of installed camera (NTSC/PAL) is selected, then the size of screen on the ca...

30X PTZ Network Camera SNP-3300 50 Item Description Video FrameRate Configures the number of transmitted frame per second in the camera. Video Channel Selects the video channel to be used in the camera. Audio-In Channel Selects whether to use the audio input channel in the camera or not. Audio-Out C...

4.2. Using Administration page 51 4.2.4. Network Configures network information of the camera. Network Configuration According to the user’s network environment, it is classified into LAN, xDSL, DHCP. Item Description LAN In case the camera is connected to the local network or xDSL with a static IP ...

30X PTZ Network Camera SNP-3300 52 Port/DDNS Configuration Item Description Connection Port This controls communication with camera. (Default : 4000) HTTP Port/ FTP Port This helps to connect to web page or FTP server. (Default : http=80, ftp=21) Use SWR Select if use of SWR function is available. T...

4.2. Using Administration page 53 Item Description Administrator Password Change Change password of administrator Guest Setup User clicks ‘Guest’ button to decide whether allowing guest to connect Main Viewer. Current User You can register new user or delete, and set up user’s authority. ※ Set up us...

4.2. Using Administration page 55 4.2.6. Pan/Tilt/Zoom Configures PTZ Swing and Preset of the camera.

4.2. Using Administration page 57 4.2.7. Motion Detection This sets up motion detection function of camera. Item Description Grid Display Basic grid, used to choose area on the screen, is displayed or hidden. Select Area When selecting motion detection area, click <Select All> button to select...

4.2. Using Administration page 61 4.2.9. Time Current Time Item Description Date Current setup date displayed Time Current setup time displayed Time Setup Item Description Set Manually Adjust time manually. Time Server Set up address of time server for Server 1 - 5.

30X PTZ Network Camera SNP-3300 62 4.2.10. LOG Recent activities made for camera are displayed as log. Item Description Lines Set up number of lines of the list. View Log is viewed with number of lines you set up most recently. Clear Delete logs.

4.2. Using Administration page 63 4.2.11. Upgrade Upgrade program of 30X PTZ Network Camera SNP-3300. System Upgrade Configuration. Item Description Firmware/Web Upgrade firmware and Web-page of 30X PTZ Network Camera SNP-3300. Factory Mode Setup If you click <Reset> button, server is returned...

30X PTZ Network Camera SNP-3300 66 5.1. OSD Menu Oganization Dome camera can be set up on the OSD(On Screen Display) menu displayed on the video monitor by Network. Menu Function Menu Function TILT UP Move up on the OSD menu PAN LEFT Move left on the OSD menu TILT DOWN Move down on the OSD menu PAN ...

5.1. OSD Menu Oganization 67 P1 P2 P3 P4 Defaults Internal ➊ Sync Line Lock: Line Lock Phase 225 Tone 005 Sharpness 050 ② Image Adj. Color 050 ⑧ Others ➌ Freeze On/Off Off ② Sequence Setting P1 P2 P3 P4 초기값 ① Preset ① Setting ② Edit ③ Execute ④ Clear ⑤ Status ① Pan Swing ① Setting ② Execute ③ Clear ...

30X PTZ Network Camera SNP-3300 68 ③ P/T Setting P1 P2 P3 P4 초기값 ① Pan Limit ➊ Position ➋ ON/OFF ② Tilt Limit ➊ Position ➋ ON/OFF ① Area1 ② Area 2 ③ Area 3 ④ Area 4 ⑤ Area5 ⑥ Area 6 ⑦ Area7 ③ Area Setting ⑧ Area8 ➊ Area Name ➋ Position ➌ ON/OFF ① Mask1 ② Mask 2 ③ Mask 3 ④ Mask 4 ⑤ Mask5 ⑥ Mask 6 ⑦ M...

5.1. OSD Menu Oganization 69 ⑤ Initialize P1 P2 P3 P4 초기값 ① Power On Reset ➊ Cancel ➋ Execute ② Factory Default Set ➊ Cancel ➋ Execute ③ Camera Default Set ➊ Cancel ➋ Execute ➍ Auto Refresh OFF, 1~7Days OFF ➏ Status P1 P2 P3 P4 초기값 Note Preset setting is only possible on the OSD menu or using the We...

30X PTZ Network Camera SNP-3300 70 5.2. Camera Setting 5.2.1. White Balance The White Balance function corrects the abnormal white color into the normal white color under any color temperature lighting. Select the mode among ATW, AWC and Manual. ATW is selected by default. „ WB Mode ƒ ATW Balances t...

5.2. Camera Setting 71 ƒ Manual Fine tuning is possible through this manual control mode. Select the color temperature and increase or decrease the Red or Blue values to shift the color of the object. Temperature: Select one temperature among 2,000K, 3,200K and 5,100K. - Red: Red Gain can be changed...

30X PTZ Network Camera SNP-3300 72 ➋ Iris Auto mode or manual mode can be selected. ƒ Auto: The brightness of the image signal can be adjusted automatically depending on the amount of light. ƒ Manual: The brightness of the image can be adjusted. ➌ Shutter ƒ ---: Electronic shutter mode is enabled. T...

30X PTZ Network Camera SNP-3300 74 Note ƒ When the Shutter menu is in Manual mode, WDR function cannot be used. ƒ When the WDR function is used, the following results may occur depending on lightning conditions. Under these conditions, turn off the WDR mode. - Unnatural color change or unnatural scr...

5.2. Camera Setting 75 5.2.5. SSNR (Samsung Super Noise Reduction) SSNR function reduces background noise under low light conditions differently in different modes. The noise reduction effect grows in Off, Low, Middle and High modes in order. ƒ OFF : No noise reduction effect. ƒ LOW : Noise reductio...

30X PTZ Network Camera SNP-3300 78 5.3. Sequence Setting Sequence Setting Menu 5.3.1 Preset 12 items such as Pan/Tilt location, Zoom and Focus are selected among camera functions and they can be called for monitoring. Total 128 points can be preset. ƒ Edit : You can edit the 11 preset items such as ...

5.3. Sequence Setting 79 „ Preset Menu Setting 1. Select the Preset item on the Sequence Setting Menu. 2. Select the Setting item. 3. Select the Preset number. 4. Set up the Zoom and Focus. 5. If you want to edit the camera function setup items, go to each item and select it. 6. If you select the Sc...

30X PTZ Network Camera SNP-3300 84 5.4. P/T Setting 5.4.1. Pan Limit The moving range in the Pan direction can be limited. ƒ Position : Moving range can be set up. Set the position from the left. The stop position may change due to the initialization by such operation as power resumption depending o...

5.4. P/T Setting 85 ƒ On/Off : The application of limitation will be determined. Default setting is Off. 5.4.3. Area Setting Areas can be indicated. Areas can be designated up to 8. ƒ Area Name : Area name can be set up. A maximum of 12 letters (English, Chinese, numbers) can be entered. When you fi...

30X PTZ Network Camera SNP-3300 88 5.5. OSD Setting 5.5.1. Camera Name Camera ID indication is set up. Note If you want to edit the item, move the cursor. Then select the character. ƒ Edit : A maximum of 12 characters consisting of English (or Chinese), numbers and special characters can be input fo...

5.5. OSD Setting 89 5.5.2. Preset Number Preset numbering is set up. (Default setting is ON.) 5.5.3. Preset Name ƒ Edit : A maximum of 12 characters consisting of English (or Chinese), numbers and special characters can be input for Preset Name.

30X PTZ Network Camera SNP-3300 90 ƒ On/Off : The operation of this function is predetermined. Default setting is On. 5.5.4. Sequence Status Display of the Sequence Group is set up. (Default setting is ON.) 5.5.5. Area Name Display of Area Name is set up.

5.5. OSD Setting 91 5.5.6. PTZ Position Pan and Tilt position and Zoom magnification are displayed. PTZ positions are not displayed in the OFF mode. (Only manual operation can display them.) 5.5.7. Language It selects a language.(English, Chinese)

30X PTZ Network Camera SNP-3300 92 5.6. Initialization Setting Initialization Menu ① Power On Reset Camera is initialized into the original status of power input. ② Factory Default Settings Camera is initialized into the factory default settings. Data including Preset is deleted. This function is us...

5.7. Status 93 5.7. Status The status of dome camera setting is displayed. CAM MODEL= 30NC Camera Model CAM VERSION= 03.06 Camera S/W Version DOME VERSION= 00.1 Control Board S/W Version DOME ID= 001 Dome Camera ID CONTROLLER= Duplex-9600 Communication Mode Setup

Troubleshooting 95 If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problem Solution Nothing appears on the screen. ƒ Please check the power connection. ƒ Please check the video signal line connect...

30X PTZ Network Camera SNP-3300 98 Problem Solution Image transferred to FTP or by E-mail cannot be viewed ƒ Video may not be viewed since Divx codec is not installed in user’s PC. Divx codec can decode video compressed with MPEG4. Download and install the latest Divx codec, and check video. http://...

30X PTZ Network Camera SNP-3300 100 Registration process of DDNS is as following: € Step1) Complete the registration form in iPOLiS website. The website is ‘www.samsungipolis.com’. Figure A-1. Website of iPOLiS

30X PTZ Network Camera SNP-3300 102 € Step2) Register the equipment after login. Figure A-4. Login Figure A-5. The list of registered equipment.

30X PTZ Network Camera SNP-3300 104 € Step3) Configure DDNS information in the equipment. Click the part of Network Configuration in website of Network Camera. Click “USE DDNS” in order to do “Enable” and input the address of DDNS Server. (Default: www.samsungipolis.com ) Enter the ID and Password t...

Specifications 107 Specifications Items SNP-3300N SNP-3300P Imaging device 1/4” Color Vertical Double Density Interline CCD. 410.000pixel TV NTSC PAL Total Number of Pixels 811(H) X 508(V) 795(H) X 596(V) Valid Pixel 768(H) X 494(V) 752(H) X 582(V) Horizontal Scan Frequency 15.734kHz 15.625KHz Verti...

Specifications 109 Note ƒ The copyright of this manual belongs to Samsung Techwin Co. Ltd. ƒ Parts or the whole of this manual cannot be reproduced or transmitted by any electric, mechanic or audio method without the authorized written approval of Samsung Techwin. ƒ The contents of this manual may b...

SAMSUNG TECHWIN www.samsungtechwin.com www.samsungipolis.com SALES NETWORK SAMSUNG TECHWIN CO.,LTD. 145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do 462-120, Korea Tel: +82-31-740-8151~8 Fax: +82-31-740-8145 SAMSUNG OPTO-ELECTRONICS UK, LTD. Samsung House, 1000 Hillswood Drive, Hillswood...