Samsung SCX-5315F, SCX-5115 - Manuals

vi Important Precautions and Safety Information When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: 1. Read and understand all instructions. 2. Use common sense whenever operating electrical appliances. 3. F...

vii • If liquid has been spilled into the product. • If the product has been exposed to rain or water. • If the product does not operate properly after instructions have been followed. • If the product has been dropped, or the cabinet appears damaged. • If the product exhibits a sudden and distinct ...

viii Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not consid...

ix Ozone Safety During normal operation, this product produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the product be operated in a well ventilated area. If you need additional information about ozone, please request your nearest Samsung dea...

x Radio Frequency Emissions FCC Information to the User This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is...

xi Ringer Equivalence Number The Ringer Equivalence Number and FCC Registration Number for this product may be found on the label located on the bottom or rear of the product. In some instances you may need to provide these numbers to the telephone company. The Ringer Equivalence Number (REN) is a m...

xii Declaration of Conformity (European Countries) Approvals and Certifications The CE marking applied to this product symbolises Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/68/EEC Directives of the European Union as of the dates indicated: January 1, 199...

xiii Replacing the Fitted Plug (for UK Only) I MPORTANT The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the f...

xiv NOTE: Any queries, problems or requests for accessories/Information as well as service should be directed at the address shown in your warranty paperwork.

1 G ETTING STARTED Thank you for purchasing Samsung multifunctional product. This machine provides printing, copying, scanning, and faxing (SCX-5315F only) functions! This chapter provides step-by-step instructions on setting up the machine, and installing the software. This chapter includes: • Unpa...

G ETTING STARTED 1 . 2 Unpacking 1 Remove the shipping tape from the front, back, and sides of the machine. 2 Remove the label completely from the scanner module by pulling it straight out, away from the unit. The scan unlock switch automatically moves to the unlock position ( ) . N OTE : To scan or...

G ETTING STARTED 1 . 4 Component Location Take a moment to familiarise yourself with the main components of your machine. Front View Automatic Document Feeder Document Guides Document Input Tray Document Output Tray Control Panel (See page 1.6 for SCX-5315F. See page 1.9 for SCX-5115.) Paper Cassett...

G ETTING STARTED 1 . 5 1 Rear View Paper Exit Extension ADF (Automatic Document Feeder) Connector Document Cover Paper Cassette Telephone Connections (available in SCX-5315F only) Document Glass AC Power Cord Connector Parallel Connector USB Connector Power Switch

G ETTING STARTED 1 . 6 Control Panel Functions SCX-5315F 4 8 12 11 10 13 2 7 1 9 3 5 6 1 Used to store frequently dialled fax numbers and dial them with the touch of one button. Also use in conjunction with the Menu/Exit button to access the corresponding menu function. Allows you to shift one-touch...

G ETTING STARTED 1 . 11 1 Making Connections 1 Connect the ADF (Automatic Document Feeder) cord to this port and fasten the side screws. N OTE : Without connecting the cord to the port, you cannot use the ADF. 2 If you have SCX-5115: Skip this step and proceed to step 3. If you have SCX-5315F: Conne...

G ETTING STARTED 1 . 12 If you want to use your machine for receiving both faxes and voice calls, you will need to connect a telephone and/or answering machine to your machine. Plug the cord of your extension phone or answering machine into the EXT jack. UK users should plug the cord of the extensio...

G ETTING STARTED 1 . 17 1 Turning the Machine On 1 Plug one end of the supplied three-wire electrical grounding type cord into the AC socket on the machine and the other end into a properly grounded AC outlet. 2 Turn on the power switch. “WARMING UP PLEASE WAIT” appears on the display indicating tha...

G ETTING STARTED 1 . 20 Setting the Paper Size After loading paper in the paper cassette, you need to set the paper size using the control panel buttons. These settings will apply to the Copy mode only. In the PC printing mode, you have to select the paper size in the application program you use. 1 ...

G ETTING STARTED 1 . 21 1 Using Save Modes Toner Save The Toner Save feature allows the printer to use less toner on each page. Activating this mode extends the life of the toner cartridges up to twice as long as in normal mode, but reduces the print quality. To turn the Toner Save mode on, take the...

G ETTING STARTED 1 . 22 Power Save The Power Save mode allows the printer to reduce power consumption when it is not in actual use. To turn the Power Save mode on, take the following steps: 1 Press SAVE Power . The display shows the current setting on the bottom line. 2 Press SAVE Power or use the n...

2 I NSTALLING S OFTWARE This chapter provides information about installing the supplied Samsung software. You must install the Samsung software to use your machine as a printer and scanner. The topics included in this chapter are: • About Samsung Software • System Requirements • Installing Samsung S...

I NSTALLING S OFTWARE 2 . 2 About Samsung Software You must install the SmarThru CD-ROM after you have set up your machine and connected it to your computer. The SmarThru CD-ROM includes the following: • MFP Driver • SmarThru Software • OCR Software (AnyPage Lite) MFP Driver To use your machine as a...

I NSTALLING S OFTWARE 2 . 3 2 System Requirements Before you begin, ensure that your system meets the minimum requirements. Supported Operating System Windows 95 OSR2/Windows 98/Windows 98 SE/Windows Me/Windows NT 4 Workstation or Server with Service Pack 3/Windows 2000 Professional or Advanced Serv...

I NSTALLING S OFTWARE 2 . 4 Installing Samsung Software N OTES : • For Windows 95/98/Me/NT 4.0/2000/XP users, cancel the “New Hardware Found” screen when the computer boots up. • Make sure that your machine is plugged in and connected to your computer’s parallel port or USB port before installing so...

I NSTALLING S OFTWARE 2 . 5 2 5 The SmarThru installation supports three types of setup: • Typical: Program will be installed with the most common options and is recommended for most users. • Compact: Only the MFP driver will be installed. • Custom: You may choose the options you want to install. Re...

I NSTALLING S OFTWARE 2 . 6 7 Choosing SmarThru networking option allows you to share the modems on other computers in your network, and your machine as a scan device or to access similar shared devices. Stand-alone configuration does not allow you to use any networking features such as Remote Fax o...

I NSTALLING S OFTWARE 2 . 7 2 8 Click Next . 9 When the installation is completed, shut down and restart your computer. If your computer does not shut down and restart automatically, you must shut it down manually and restart it before the changes will be saved. N OTE : When you install the software...

I NSTALLING S OFTWARE 2 . 8 Uninstalling Samsung Software Uninstall is required if you are upgrading the software or if your installation fails. You can uninstall all software including SmarThru and MFP drivers, using the SmarThru CD or uninstall the desired item using the Window unInstallShield. No...

I NSTALLING S OFTWARE 2 . 10 Uninstalling Samsung SmarThru 1 From the Start menu, select Programs . 2 Select Samsung SmarThru , then select SmarThru 3 Uninstall . 3 When your computer asks you to confirm your selection, click Yes . The Uninstall Options dialogue box appears. Uninstall options are: •...

I NSTALLING S OFTWARE 2 . 12 Using the SmarThru CD-ROM You can uninstall both the MFP driver and the SmarThru software with the CD-ROM you have used to install the software. 1 Insert the SmarThru CD-ROM into your CD-ROM drive. The SmarThru CD-ROM should automatically run and the installation window ...

3 P APER H ANDLING This chapter introduces you to the basics of selecting print media and loading print media into your machine. This chapter includes: • Selecting Print Media • Paper Guidelines • Loading Paper in the Cassette • Using the Bypass Tray • Setting the Paper Size for Copying

P APER H ANDLING 3 . 2 Selecting Print Media Always use print media that meets the guidelines for use with this machine. Using a print media that is not recommended may cause paper jams or print quality problems. Media Size Input Sources and Capacities Media Size Input Source/Capacity a a. Maximum c...

P APER H ANDLING 3 . 3 3 Paper Guidelines When selecting or loading paper, envelopes, or other special media, keep these guidelines in mind: • Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality. • Use only high quality copier grade paper. Avoid p...

P APER H ANDLING 3 . 4 • Store unused media at temperatures between 59 o F and 86 o F (15 o C to 30 o C). The relative humidity should be between 10% and 70%. • Do not load more than 10 sheets of special media into the Bypass Tray at a time. • Verify that your labels’ adhesive material can tolerate ...

P APER H ANDLING 3 . 6 Using the Bypass Tray Bypass Tray is located at the right side of your machine. It can be closed when you are not using it, making the machine more compact. Use the Bypass Tray to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper ty...

P APER H ANDLING 3 . 9 3 Setting the Paper Size for Copying After loading paper in the paper cassette or the Bypass Tray, you need to set the correct paper size using the control panel buttons. These settings will apply to the Copy mode, and the Fax mode (SCX-5315F only). In PC printing mode, you ha...

4 C OPYING This chapter provides step-by-step instructions for copying documents. This chapter includes: • Loading Paper for Copy Output • Selecting a Paper Tray • Making Copies from the Automatic Document Feeder • Making Copies using the Document Glass • Setting Copy Options • Auto Fit Copying • Cl...

C OPYING 4 . 2 Loading Paper for Copy Output You can copy to a size of media as small as an index card (3.9 by 5.8 inch) or as large as a sheet of legal-sized (8.5 by 14 inch) paper. The instructions for loading the print media are the same whether you are printing, faxing, or copying. For details, ...

C OPYING 4 . 3 4 Making Copies from the Automatic Document Feeder Using the ADF (Automatic Document Feeder), you can load up to 30 documents (20lb, 75 g/m 2 ) in one job. Ensure that documents are in good condition, that they have the same thickness and weight, and that all of the staples and paper ...

C OPYING 4 . 4 6 Press Copy/Start to begin copying. The display shows the copy processing. N OTE : Dust on the ADF glass may cause black lines on the printout, so always keep it clean. Making Copies using the Document Glass If you want to make copies from booklet, pamphlet, transparencies, or docume...

C OPYING 4 . 5 4 N OTE : Make sure that no other documents are in the ADF. If a document is detected in the ADF, this document has the priority rather than the document on the scan glass. 3 Close the scanner cover. N OTES : • Leaving the cover open while copying will affect the copy quality and tone...

C OPYING 4 . 6 Setting Copy Options The following buttons on the control panel let you set all the basic copy options; contrast, image type, number of copies and copy size. When making a copy, use these buttons before pressing Copy/Start . Image The Image setting is used to improve the copy quality....

C OPYING 4 . 7 4 Contrast If you have an original document containing faint markings or dark images, you can adjust the brightness to make a copy that is easier to read. To adjust the contrast, take the following steps: 1 Press Contrast . 2 Press Contrast or the navigation buttons to select an optio...

C OPYING 4 . 8 Zoom Using the Zoom ( ) button, you can reduce or enlarge the size of a copied image by 25% to 400% when you copy the original from the document scanner glass, and by 25% to 100% using the ADF. Note that the zoom rate available is different according to the document loading method. 1 ...

C OPYING 4 . 9 4 Auto Fit Copying This feature automatically reduces or enlarges the original image to fit on the paper currently loaded in the machine, so you don’t need to adjust the copy size. This special copy mode is only available when using document scanner glass. If a document is detected in...

C OPYING 4 . 10 Clone Copying The Clone feature prints multiple image copies on a single page. The number of images is automatically determined by the original image size, so you are unable to adjust the copy size. This special copy mode is available only when using the document scanner glass. If a ...

C OPYING 4 . 11 4 Duplex Copying Duplex copying allows you to print on both sides of the paper. Before printing in the duplex mode, decide on which edge you will bind your finished document. The binding options are: LONG EDGE , which is the conventional layout used in book binding. SHORT EDGE , whic...

C OPYING 4 . 12 8 When the document is fed from the document glass, the display shows “SCAN SIDE 2?” on the top line after the page is scanned into the memory. To scan another page, remove the scanned page and load the next page on the glass. Select “YES” and press Mode/Enter . After scanning, the m...

C OPYING 4 . 13 4 4 Press Mode/Enter ( Enter on SCX-5115) to save the selection. 5 If necessary, customise the copy settings including the number of copies, copy size, contrast and image type using the control panel buttons. See “Setting Copy Options” on page 4.6. 6 Press Copy/Start to begin copying...

5 P RINTING Read this chapter to learn how to select and load print media and how to use the print settings. This topics included in this chapter are: • Printing a Document • Printer Settings • Setting Up the Locally Shared Printer

P RINTING 5 . 2 Printing a Document This procedure describes the general steps required for printing from various Windows applications. The exact steps for printing a document may vary depending on the application program you are using. Refer to the user’s guide of your software application for the ...

P RINTING 5 . 3 5 5 Click OK to close the Properties dialogue box. 6 After making any necessary changes to the printing parameters, click OK to start the print job. Printer Settings You can use the machine with all your Windows 95/98/Me/2000/XP or Windows NT 4.0 applications. Be sure to set Samsung ...

P RINTING 5 . 4 Windows NT 4.0 • Select the File > Print > Properties or File > Print Setup command from within any Windows application.Or • Select Samsung SCX-5x15 Series PCL 6 printer from the Printers folder, click the right mouse button, then select Document Defaults from the drop-down ...

P RINTING 5 . 5 5 Paper Tab Use the Paper tab to select the size of paper you have in your printer, the orientation, the number of copies to print, etc. Click on the box to put a check mark to use the different paper source for the first page. Select the desired paper source for the first page and o...

P RINTING 5 . 6 Graphic Tab The Graphic tab allows you to adjust the print quality for your specific printing needs. You can select the printing resolution. The higher the setting, the sharpen the clarity of printed image. Higher settings may increase the time it takes to print a document. When you ...

P RINTING 5 . 7 5 Output Tab The Output tab provides options for you to adjust how the document will appear on the printed page. The Output Mode Type options includes Multiple Pages per Side , Booklet Printing , Fit to Page , Poster and Duplex printing . Multiple Pages per Side Choose the Multiple P...

P RINTING 5 . 8 Booklet Printing The Booklet Printing option allows you to print a document out as a booklet. Once your document prints, fold the pages in half and staple the pages. Booklet printing is available only when you select Plain Paper for Paper Type in the Paper tab. Fit to Page Choose thi...

P RINTING 5 . 9 5 Poster Choose the Poster option to enlarge the printed document. To determine the scaling factor, select the style. You can choose from: 2x2 , 3x3 , or 4x4 . For example, if you select 2x2 , the output will be automatically stretched to cover 4 physical pages. 1 1

P RINTING 5 . 10 Duplex Printing Choose the Duplex option from the Output tab to print the document on both sides of the paper. Duplex printing is available only when you select Plain Paper for Paper Type in the Paper tab. Choosing Long Edge lets you have the binding orientation along the long edge ...

P RINTING 5 . 11 5 Watermark Tab The Watermark tab allows you to create a background image of text to print on each page of your document. Watermarks are useful for printing identifying information on a document, information such as “DRAFT” or “CONFIDENTIAL”, or perhaps the name of your company or d...

P RINTING 5 . 12 About Tab The About tab gives you the programme version number. If you click on the globe image on the window, you will be connected to the Samsung web site provided you have access to the Internet. Printer Properties Buttons & Icons • Click OK when you finish reviewing or makin...

P RINTING 5 . 13 5 4 Click Start and select Printers from Settings . Double-click your printer name. 5 Select Properties in the Printer menu. 6 Click the Sharing tab and check the Shared As box. Fill in the Shared Name field and then click OK . Setting Up the Client Computer 1 Right-click Start and ...

6 S CANNING Scanning with your machine lets you turn pictures and text into digital files on your computer. Then you can fax or e-mail the files, display them on your web site, or use them to create projects that you can print out using Samsung SmarThru software which came with your machine. This ch...

S CANNING 6 . 4 4 Click the desired service. 5 The Samsung Scan Manager opens for the selected service. Adjust the scan settings. You can use the Help button to receive on-line help. 6 To begin scanning, click Scan . For further information, please refer to the SmarThru User’s Guide which came with ...

7 M AINTENANCE This chapter provides information for maintaining the cartridge and your machine. This chapter includes: • Cleaning the Scan Unit • Expected Cartridge Life • Replacing the Toner Cartridge • Setting to Notify Toner Low (Available in SCX-5315F only) • Cleaning the Drum • Replacing the D...

M AINTENANCE 7 . 2 Cleaning the Scan Unit Keeping the scan unit clean helps ensure the best possible copies. We suggests that you clean the scan unit at the start of each day and during the day as needed. C AUTIONS : Cleaning the cabinet of the printer with surfactants containing large amounts of al...

M AINTENANCE 7 . 3 7 Expected Cartridge Life The life of your toner cartridge depends on the amount of toner used in each print job. For instance, when you print a typical business letter with about 5% page coverage, you can expect a toner cartridge life of approximately 6,000 pages. The actual numb...

M AINTENANCE 7 . 7 7 Setting to Notify Toner Low (Available in SCX-5315F only) If you have set this NOTIFY TONER LOW menu option to “ON,” your machine automatically sends a fax to your service company or the dealer to notify them that your machine requires a new toner cartridge when the toner cartri...

M AINTENANCE 7 . 8 Cleaning the Drum If there are streaks or spots on your print, the drum cartridge may require cleaning. 1 Before setting the cleaning procedure, make sure that paper is loaded in the machine. 2 SCX-5315F users should press Menu/Exit then Maintenance from the one-touch dial keypad....

M AINTENANCE 7 . 11 7 SCX-5115 users should press Menu then press or until “MAINTENANCE” appears on the top line. 2 Use or until “NEW DRUM” appears on the bottom line of the display, and press Mode/Enter ( Enter on SCX- 5115). 3 “NEW DRUM UNIT?” appears on the top line and “1.YES 2.NO” appears on th...

8 T ROUBLESHOOTING This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Document Jams • Paper Jams • LCD Error Messages • Solving Problems

T ROUBLESHOOTING 8 . 2 Document Jams If a document jams while it is feeding through the ADF, “DOCUMENT JAM” appears on the display. Details for clearing the three types of document misfeeds are given below. Input Misfeed 1 Open the ADF top cover. 2 Pull the document gently to the right and out of th...

T ROUBLESHOOTING 8 . 3 8 Exit Misfeed 1 Open the document cover and turn the release knob to remove the misfed documents from the exit area. 2 Close the document cover. Then place the documents back into the ADF. Roller Misfeed 1 Open the document cover. 2 Turn the release knob so that you can easil...

T ROUBLESHOOTING 8 . 4 Paper Jams If paper jams occur, “PAPER JAM” appears on the display. Follow the steps below to clear the jam. To avoid tearing the paper, pull the jammed paper out gently and slowly. Paper Feed Area If the paper jammed in the feed area, “PAPER JAM0” appears in the display. 1 Pu...

T ROUBLESHOOTING 8 . 6 Fuser Area If the paper jammed in the fuser area, “PAPER JAM 1” appears on the display: N OTE : The fuser area is hot. Take care when removing paper from the machine. 1 Lift the release lever to open the side cover. 2 Pull down on the fuser lever as shown below.This will relea...

T ROUBLESHOOTING 8 . 7 8 4 Push the fuser lever up, and then close the side cover. Paper Exit Area If the paper jammed in the exit area, “PAPER JAM 2” appears on the display. 1 Press the release lever to open the side cover. 2 Open the front cover.

T ROUBLESHOOTING 8 . 9 8 6 Turn the Jam Remove Lever back to the original position. 7 Close the front cover and the side cover . Duplex Jam If paper jam occurs in the duplexer, “DUPLEX JAM” appears on the display. 1 Press the release lever to open the side cover. 2 Remove the jammed paper. Then clos...

T ROUBLESHOOTING 8 . 10 Bypass Jam “BYPASS JAM” appears on the display when you try to print using the Bypass Tray and the machine does not detect paper due to no paper or improper paper loading. “BYPASS JAM” also may occur when the paper is not properly fed into the machine through the Bypass Tray....

T ROUBLESHOOTING 8 . 11 8 LCD Error Messages Display Meaning Solution BYPASS JAM The machine detects no feeding from the Bypass Tray. Load paper in the Bypass Tray. DOCUMENT JAM The loaded document has jammed in the ADF. Clear the document jam. See page 8.2. DOOR OPEN The side cover is not securely ...

T ROUBLESHOOTING 8 . 13 8 Solving Problems The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, please contact a service engineer. Copier Problem Solution Chart TONER EMPTY The ...

T ROUBLESHOOTING 8 . 14 Copy image is skewed. Ensure that original is positioned correctly on document glass. Check that the copy paper is loaded correctly. Blank copies. Ensure that the original is face down on the document glass or face up in the ADF. Image rubs off the copy easily. Replace the pa...

T ROUBLESHOOTING 8 . 15 8 Printing Problem Solution Chart Condition Probable cause Suggested solutions Your machine does not print. The IEEE-1284 parallel cable or USB cable is not connected properly. Check the cable connection. The IEEE-1284 parallel cable or USB cable is defective. Check the cable...

T ROUBLESHOOTING 8 . 18 Fax Problem Solution Chart (Available in SCX-5315F only) Condition Suggested solutions The machine is not working, there is no display and the buttons are not working. Unplug the power cord and plug it in again. Check that your socket is Live. No dial tone Check that the phon...

A I NSTALLING A N ETWORK O PTION You can connect your machine to your network by installing an optional network interface card. This chapter includes: • Installing a Network Interface Card • Configuring Network Parameters • Configuring the Samsung Network Printer Port

I NSTALLING A N ETWORK O PTION A . 2 Installing a Network Interface Card To install an optional network interface card, take the following steps: C AUTIONS : • DISCONNECT THE POWER CORD. Never remove the control board while the printer is plugged in. To avoid the possibility of an electrical shock, ...

I NSTALLING A N ETWORK O PTION A . 6 13 Plug one end of the 10/100 Base-TX network cable into the network interface connector and the other end into the network connection. 14 Plug all of the cables and the power cord you removed in Step 2. 15 Turn your machine on. Configuring Network Parameters To ...

I NSTALLING A N ETWORK O PTION A . 7 A Supported Operating Systems • IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange• TCP/IP: Transmission Control Protocol/Internet Protocol• DLC/LLC: Data Link Control/Logical Link Control• DHCP: Dynamic Host Configuration Protocol• BOOTP: Bootstrap Prot...

I NSTALLING A N ETWORK O PTION A . 8 Configuring TCP/IP Your printer can be set up on a variety of TCP/IP networks. There are two ways that your printer can be assigned a TCP/IP address, depending on your network: • Static Addressing: TCP/IP address is assigned manually by the system administrator. ...

I NSTALLING A N ETWORK O PTION A . 10 Configuring Netware On IPX/SPX protocol networks (for example, Novell NetWare), the format of network communication frames must be specified on the printer. In most cases, you can keep the default setting on “AUTO.” However, you can manually set the frame type f...

I NSTALLING A N ETWORK O PTION A . 11 A Restoring the Network Configuration You can return the network configuration to its default settings. 1 Press Menu/Exit and then System Setup on the one- touch dial keypad. SCX-5115 users should press Menu and then Enter . 2 Press or to display “NETWORK SETUP”...

I NSTALLING A N ETWORK O PTION A . 12 Configuring the Samsung Network Printer Port The supplied network programme installation CD-ROM contains Samsung Network Printer Port for using Windows networks. You can install the port with the network administration programme. Before installing the Samsung Ne...

I NSTALLING A N ETWORK O PTION A . 13 A Selecting the Samsung Network Printer Port To print to the Samsung Network Printer port, you need to select it in the printer driver. 1 From the Windows Start menu, selecting Settings and then Printer to open the Printer folder. In Windows XP, select Start and...

B S PECIFICATIONS This chapter includes: • General Specifications • Scanner and Copy Specifications • Printer Specifications • Facsimile Specifications (SCX-5315F only)

S PECIFICATIONS B . 2 General Specifications Item Description Printing method Laser scanning unit Scanning method Sheet-fed and Flat-bed CCD(charge coupled device) module Effective scanning width 8.2 inches (208 mm) ADF Document size Width 6.9 to 8.5 inches (174 to 216 mm) Length Single page: 5 to 5...

S PECIFICATIONS B . 3 B Scanner and Copy Specifications LCD 16 Characters x 2 lines Toner cartridge life 6,000 pages @ IDC 5% coverage Drum cartridge life 15,000 pages @ IDC 5% coverage SET Dimension (WxDxH) 22.0 x 17.0 x 18.1 inches (560 x 433 x 459 mm) Weight Net: 22.5 Kg (including consumables) G...

S PECIFICATIONS B . 4 Printer Specifications Facsimile Specifications (SCX-5315F only) Item Description Printing method Laser Scanning Unit Printing speed 15 pages per minute/A4 Print resolution 1200 dpi class Emulation language PCL 6 Item Description Printing method Laser Scanning Unit Compatibilit...

I NDEX A ADF load 4.3 B booklet print 5.8 C cartridge locking lever 1.16 clone in copy mode 4.10 in print mode 5.7 collation for copying 4.12 consumables 7.11 contrast for copying 4.7 copy size 4.8 D default printer 5.2 display language 1.20 document jam, clear 8.2 load in ADF 4.3 load on document g...