Samsung SCC-C7439P - Manuals

English _ English CONTENTS OvERvIEW 2 4 Important Safety Instructions 5 Contents 6 Features 6 What’s Included 7 At a Glance INSTALLATION & CONNECTION 8 8 Optional Accessories for Installation 10 Precautions 10 Preparation 11 Installation 14 Initial Setup 17 Connecting with other Device SETUP 20 ...

overview _ overview FEATURES With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implementedHigh performance surveillance camera, equipped with x34 zoom lens and digital zoom IC, enabling monitoring up to 544...

English _ English AT A GLANCE CAmERA FRAmE SET Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol. M  LENS HOOK HOOK ALARM IN ALARM OUT RS-485 POWER INPUT 00955G-EU1_SCC-C7439P-ENG-1.indd7 7 2009-10-15 8:56:03

_ installation & connection installation & connection OPTIONAL ACCESSORIES FOR INSTALLATION For your easier installation, you can purchase appropriate optional accessories available. WALL MOUNT ADAPTOR (SCX-300WM) This is a wall mount adaptor, used for wall-mounted installation of SMART DOME...

installation & connection 10_ installation & connection PRECAUTIONS Select an installation spot which can endure more than 4 times of the product weight.When installing, prevent peoples approaching to avoid personal injury. Move valuables to a safer place before installing. PREPARATION Run a...

English _11 English INSTALLATION Press the SNAP FIT of the ADAPTOR in the HOUSING to open the ADAPTOR part, and then insert all external cables into the HOUSING . Secure the HOUSING on the PIPE or mOUNT by turning it clockwise. (Secure two components tightly, to avoid loosened HOUSING .) Connect ext...

installation & connection 1_ installation & connection INITIAL SETUP Camera Address Setup Use SW606, SW605, and SW604 to specify the camera address. You can specify between 0 and 255 for the address, where the hundreds digit is with SW606, the tens digit with SW605, and the ones digit with S...

English _1 English Baud Rate Setup Use pins #5, #6 of SW603 to set the baud rate. BAUD RATE PIN 5 PIN 6 4800 BPS ON ON 9600 BPS OFF ON 19200 BPS ON OFF 38400 BPS OFF OFF The factory default is 9600 BPS. Setting RS-422A/RS-485 Termination As it is shown in the structure map, when Controller and RS-42...

English _1 English CONNECTING WITH OTHER DEvICE Connecting to a monitor Connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT).Connect the other end of the connector to the Video Input Terminal of the monitor. 1. 2. Video terminal on the rear of monitor BNC Cable M...

installation & connection 1_ installation & connection To connect ALARm IN Connect one end of the external device's signal line to a corresponding ALARM IN port of the monitor.Connect the other end of the signal line to the earth-grounding [ GND ] port. To connect ALARm OUT Connect one end o...

English _1 English Connecting the adaptor cable Power Supply Connect the cables as necessary, and turn on the camera to check if it works properly. Connect the adaptor to the power terminal of the camera.Plug the power cord of the adaptor into the wall outlet. 1.2. Adaptor Board 00955G-EU1_SCC-C7439...

0_ setup setup Connect the camera to the keyboard controller or DVR, with which you can manipulate and change the settings of the camera. HOW TO USE THE KEyBOARD CONTROLLER Follow the steps below to set the camera menu using the controller. Open the Camera Setup screen.Use the joystick to navigate t...

English _1 English mAIN mENU This is the first screen you ever see when you turn on the camera where you can set the camera environment to your needs. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) PROFILE Select a mode appropriate to the camera i...

_ setup setup PROFILE You can select one from the pre-determined configurations as appropriate to your specific camera installation environment. Your selection on each item in PROFILE will affect all other settings of the camera. STANDARD Automatically optimizes the camera settings to the normal env...

_ setup setup CAmERA SET You can configure the general settings of the camera module. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) Select < mAIN mENU > - < CAmERA SET >. The Camera Setup menu appears.Change the settings as necessary,...

English _ English IRIS The IRIS menu is useful if you set to adjust the intensity of radiation incoming to the camera. ALC : Adjust the open and close of the iris.- LEVEL : Select an overall brightness level.- BLC : With < BACKLIGHT > set to < BLC >, you can specify the BLC area. With AR...

_ setup setup AGC With this, you can adjust the AGC level of a camera. With AGC active, if the signal strength falls below the standard level, AGC will amplify the video signal to automatically improve the sensitivity. If < SENS-UP > is set to < OFF >, or < FIx > mode, the < mOT...

English _ English SHUTTER You can select a fixed fast electronic shutter speed in 7 options ranging from 1/120 to 1/10k, which is mostly used to take a picture of a fast moving object. As long as SENSE UP is set to AUTO, FIXED / FLICKERLESS to ON / BACKLIGHT to WDR, the SHUTTER menu is not available...

English _ English You can specify MASK 1 and 2 simultaneously. If < BACKLIGHT > is set to < BLC >, the MASK AREA function is not available. EXT : The interface to an external alarm enables an automatic switch between DAY and NIGHT mode. If you set < DAy/NIGHT > to EXT, and alarm #1...

0_ setup setup Select < CAmERA SET > - < WHITE BAL >. Select a mode where you set the < WHITE BAL >. DAY : You can set the RED, and BLUE value in DAY mode. The screen will be displayed in colors according to your settings. You can set the R-GAIN, and B-GAIN value only in < AWC &...

English _1 English FOCUS mODE You can select a focus mode according to the angle that you adjusted for camera recording.- AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in < mF >. This will also restore foc...

_ setup setup v-SyNC You can set the V-SYNC mode.- If you select < INT >, the camera will use the internal synchronization. - If selecting < LINE >, the camera will use an external power frequency for synchronization. The LL-PHASE can be adjusted as appropriate. AGC COLOR SUP You can adj...

English _ English INTELLIGENT vIDEO You can enable the motion detection and tracking functions. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) Select < mAIN mENU >-< INTELLIGENCE >. Select each item and set appropriately. mOTION You ca...

_ setup setup DISPLAy When selected < ON >, it displays the motion detected and detection of configured advanced function. SENSITIvITy Sets the sensitivity of motion sensor. RESOLUTION The bigger the resolution setting, the smaller the object that can be detected. ALARm OUT When selected < ...

_ setup setup Select the preset number. Select < POSITION > and adjust < PAN/ TILT/ZOOm > to the desired setup using the joystick.Set < PRESET ID > to < ON > and enter the name. For entering the name, refer to “ CAMERA ID ”. (page 24) Select < PRESET SPEED > and adjust ...

English _ English The preset position can be specified for a tilt range of between 0° and 90°. Those presets that are out of a tilt of 90° can not be specified.If you try to specify a preset position for a range exceeding a tilt of 90° using a controller (SSC-1000, 2000 or 5000), you will see a mess...

_ setup setup Select each item and set appropriately. POSITION : Set the starting and ending positions for the < AUTO PAN >. Move to the setting screen and adjust pan/tilt to the desired starting position, and then press [ ENTER ]. Again, adjust pan/tilt to the desired ending position and pres...

English _ English Pattern Setup You can manually record your pan/tilt/zoom movements to a monitoring pattern for up to 2 minutes. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) Select < mAIN mENU >-< AUTO SET >. Select the pattern numb...

0_ setup setup Auto Play Setup AUTO PLAY runs configured AUTO PAN, PATTERN, and SCAN functions automatically. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) Select < mAIN mENU >-< AUTO SET >. Select the < AUTO PLAy > and select a...

English _1 English ZONE SET You can set the north direction and the zone coverage. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) Select < mAIN mENU >-< ZONE SET >. Set < AZImUTH > to < ON >. Set the north direction using t...

_ setup setup ALARm SET It provides 8 alarm inputs and 3 alarm outputs. Detects alarm inputs from the external sensors cooperating with configured presets, patterns, and scan functions, and produces alarm outputs. Alarm’s dwell time is defined by the corresponding preset’s < DWELL TImE > and i...

_ setup setup CLOCK SET Sets whether to display the clock on the screen and its time format. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) Select < mAIN mENU >-< CLOCK SET >. Select < DISPLAy > and set whether to display the tim...

English _ English FACTORy DEFAULTS When selected, the < FACTORy DEFAULTS > screen appears and you can reset all settings to the factory default settings by selecting the < OK >. However, the protocol, baud rate, address and the language settings will not be reset. Note that the resetting...

_ setup setup COmmUNICATION You can set the RS-485 communications setting in regard of the camera. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) Select < mAIN mENU >-< COmmUNICATION >. Select each item and set appropriately. PRIORITY ...

English _ English LANGUAGE You can set the language of the user interface. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 20) Select < mAIN mENU >-< LANGUAGE >. Select your language using the up/down keys. 1.2.  LANGUAGE   ENGLISH FRANÇ...

appendix 48_ appendix appendix Shortcut KeyS Function Key cAMerA Set DAY/NIGHT - DAY [PRESET] + [5] + [1] + [2] + [ENTER] DAY/NIGHT - NIGHT [PRESET] + [5] + [1] + [3] + [ENTER] DAY/NIGHT - AUTO [PRESET] + [5] + [1] + [4] + [ENTER] DAY/NIGHT - EXT [PRESET] + [5] + [1] + [5] + [ENTER] IRIS – ALC – BAC...

English _49 e nglish SpeciFicAtionS item Description product type SMART DOME CAMERA power Source AC 24 V (50 Hz) Use an adaptor over 3A when the heater works. power consumption 16.3W(Camera, Fan) / 47W(Heater ON) tV Standard PAL STANDARD COLOR SYSTEM image Sensor ExView-HAD PS CCD effective pixels 7...

English _51 e nglish proDuct AppeArAnce 256mm 240mm Ø216mm (Housing Body) Ø228mm (Shield Sun) 00955G-EU1_SCC-C7439P-ENG-2.indd51 51 2009-10-15 8:57:48

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charge...