Samsung RM40D - Manuals

Table of contents Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre 124 Testing the Product 124 Checking the Resolution and Frequency 124 Check the followings. 125 Q & A 131 Specifications General 133 Power Consumption 135 Preset Timing Modes 136 Appendix Conta...

6 Before Using the Product Chapter 01 Copyright The contents of this manual are subject to change without notice to improve quality. © 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of...

7 Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPENCaution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)THERE ARE NO USER SERVICEABLE PARTS INSIDE.REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.It is dangerou...

9 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. ! Keep the power s...

11 Caution ! Do not drop the product while moving. • Product failure or personal injury may result. Do not set down the product on its front. • The screen may become damaged. When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protrudi...

15 Preparations Chapter 02 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may differ from the image shown. - The Mini Wall-mount Kit may not be supported, depending on the model. Checking the Components...

16 Items sold separately HDMI cable HDMI-DVI cable Video cable Audio cable RCA stereo cable Stereo cable D-SUB cable - The following items can be purchased at your nearest retailer.

17 Parts Control Panel Panel Key Speaker POWER Remote sensor ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Panel Key Buttons Description Power on the product. If you press the button when the product is turned o...

18 ― If you press the button on the panel key when the product is turned on, the control menu will be displayed. Control menu Return Buttons Description Source Select the connected input source. Move the panel key right to select Source in the control menu. When the list of input sources is displaye...

19 Reverse Side ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. HDMI IN 2 (DVI) COMMON INTERFACE COMMON INTERFACE HDMI IN 1 (STB) AUDIO OUT PC AUDIO IN PC IN RS232C IN ANT IN AIR/CABLE USB (5V 0.5A) / CLONING AUDI...

21 Remote control button functions may differ for different products. Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not su...

22 A B C D ALARM SUBT. CLOCK Press to display information on the TV screen. CLOCK : When you press INFO key in standby mode, TV screen displays the time. Exit the menu. Play photos, videos or music. Quickly select frequently used functions. Return to the previous menu. Remote control button function...

23 Before Installing the Product (Installation Guide) 15 ˚ To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Otherwise, it may fall and cause pers...

24 A B C E Figure 1.3 Side view D D Figure 1.2 Side view Installation on an Indented Wall ― Contact Samsung Customer Service Centre for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an in...

25 Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit allows you to mount the product on the wall.For detailed information on installing the wall mount, see the instructions provided with the wall mount.We recommend you contact a technician for assistance when installing the ...

26 Wall Mount Kit Specifications ― Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information.If you install the product on a slanted wall, it may fall and res...

27 Connecting and Using a Source Device Chapter 03 Before Connecting Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable until all...

29 Connecting to a Video Device • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ― Connecting parts may differ in different products. ― Press ...

30 Connection Using an HDMI-DVI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HD...

31 Connecting to an Audio System ― Connecting parts may differ in different products. AUDIO OUT Connecting the Antenna ― Connecting parts may differ in different products. ― When the product is powered on for the first time, basic settings are configured automatically. Take extra care to ensure the ...

32 Connecting to a TV Viewing Card slot To connect the CI CARD, follow these steps: ― CI card slots are available, depending on the model. Using the “CI or CI+ CARD” To watch paid channels, the “CI or CI+ CARD” must be inserted. ― Turn the TV off to connect or disconnect a CI card. • If you don’t in...

33 Initial Setup After powering on the product for the first time, configure basic settings such as the language, channel and time. Language → Regional Settings → Channel Source → Auto Tuning ( Auto Tuning does not appear if Set-top box or No TV(Signage Only) is selected.) → Network Settings → Clock...

34 Screen Adjustment Configure the Picture settings ( Backlight , Colour Tone , etc.). - The layout of the Picture menu options may vary depending on the product. Chapter 04 Picture Mode MENU m → Picture → Picture Mode → ENTER E Select a picture mode ( Picture Mode ) suitable for the environment whe...

35 Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) MENU m → Picture → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Tint (G/R) Standard 55 100 45 50 50 G50 R50 - The displayed image may differ depending on the model. Your product has seve...

36 Picture Size MENU m → Picture → Picture Size → ENTER E · · Picture Size Picture Size Resolution Select 16:9 Position 4:3 Screen Size - The displayed image may differ depending on the model. choose size and aspect ratio picture displayed on screen. Picture Size ― Different Screen Adjustment option...

37 Picture Sizes available by Input Source. Input Source Picture Size ATV Auto Wide , 16:9 , Wide Zoom , Zoom , 4:3 DTV (1080i) Auto Wide , 16:9 , Wide Zoom , Zoom , 4:3 , Screen Fit , Smart View 2 AV (480i, 480p) Auto Wide , 16:9 , Wide Zoom , Zoom , 4:3 , Custom HDMI1 , HDMI2 (720p, 1080i, 1080p) ...

38 Position · · Picture Size Picture Size Resolution Select Wide Zoom Position 4:3 Screen Size - The displayed image may differ depending on the model. Adjusts the picture position. Position is only available if Picture Size is set to Wide Zoom , Zoom or Screen Fit . ― To use the Position function a...

39 4:3 Screen Size · · Picture Size Picture Size Resolution Select Custom 16:9 Zoom/Position 4:3 Screen Size - The displayed image may differ depending on the model. Available only when picture size is set to Auto Wide . You can determine the desired picture size at the 4:3 WSS ( Wide Screen Service...

40 Auto Adjustment MENU m → Picture → Auto Adjustment → ENTER E Picture Auto Adjustment - Available in PC mode only. - The displayed image may differ depending on the model. Adjust frequency values/positions and fine tune the settings automatically

41 PC Screen Adjustment MENU m → Picture → PC Screen Adjustment → ENTER E PC Screen Adjustment Coarse Fine Position Image Reset - The displayed image may differ depending on the model. • Coarse / Fine Removes or reduces picture noise.If the noise is not removed by Fine-tuning alone, use the Coarse f...

42 PIP MENU m → Picture → PIP → ENTER E Picture PIP - The displayed image may differ depending on the model. - For PIP sound, refer to the Sound Select instructions. - If you turn the product off while watching in the PIP mode, PIP mode will remain after power Off/On. PIP Settings The picture from t...

43 Advanced Settings MENU m → Picture → Advanced Settings → ENTER E Advanced Settings Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Colour Space White Balance Gamma Medium Off 0 Off Native 0 - The displayed image may differ depending on the model. Input Source Picture Mode Advanced Settings P...

45 Advanced Settings White Balance Gamma 0 Motion Lighting Off - The displayed image may differ depending on the model. White Balance Adjust the colour temperature for a more natural picture. 2 Point • R-Offset / G-Offset / B-Offset : Adjust each colour’s (red, green, blue) darkness. • R-Gain / G-Ga...

46 Picture Options MENU m → Picture → Picture Options → ENTER E Picture Options Colour Tone Colour Temp. Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Dynamic Backlight Off 10000K Off Off Normal Off Off - The displayed image may differ depending on the model. Select an option using...

47 Picture Options Colour Tone Colour Temp. Digital Clean View MPEG Noise Filter Off 10000K Off Off - The displayed image may differ depending on the model. Colour Tone If the input source is PC , HDMI1 (PC connection), HDMI2 (PC connection). • Off / Cool / Standard / Warm If the input source is AV ...

48 Picture Options HDMI Black Level Film Mode Dynamic Backlight Normal Off Off - The displayed image may differ depending on the model. HDMI Black Level Selects the black level on the screen to adjust the screen depth. • Normal / Low ― Available only in HDMI1 (PC connection), HDMI2 (PC connection) m...

49 Picture Off MENU m → Picture → Picture Off → ENTER E Picture Picture Off - The displayed image may differ depending on the model. Selecting Picture Off switches off the screen. The volume is not disabled. To switch the screen on, press any button other than the volume button. Reset Picture MENU m...

50 Sound Adjustment Configure the sound ( Sound ) settings for the product. Chapter 05 Sound Mode MENU m → Sound → Sound Mode → ENTER E Sound Sound Mode Sound Effect Speaker Settings Additional Settings Reset Sound Standard - The displayed image may differ depending on the model. You can select a so...

51 Sound Effect MENU m → Sound → Sound Effect → ENTER E Sound Sound Effect - The displayed image may differ depending on the model. Configure your preferred sound effect for output sound. ― If Speaker Select is set to External , Sound Effect is disabled. ― Available only when Sound Mode is set to St...

52 Speaker Settings MENU m → Sound → Speaker Settings → ENTER E Sound Speaker Settings - The displayed image may differ depending on the model. • Speaker Select ( External / Internal ) If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound ...

53 Additional Settings MENU m → Sound → Additional Settings → ENTER E Sound Additional Settings - The displayed image may differ depending on the model. DTV Audio Level (Digital channels only)The TV cannot freely control the volume of the digital audio that it sends to the AV receiver. Use this to s...

54 Reset Sound MENU m → Sound → Reset Sound → ENTER E Sound Reset Sound - The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.

55 Broadcasting Configure the Broadcasting settings for the product. Chapter 06 Auto Tuning MENU m → Broadcasting → Auto Tuning → ENTER E Broadcasting Auto Tuning Aerial Channel List Guide Schedule Manager Edit Channel Edit Favorites Air - The displayed image may differ depending on the model. - Ava...

56 Cancelling Auto Tuning 1 Press the Stop button. 2 A Stop Auto Tuning? message appears. 3 Press the Yes button. Cable Search Option MENU m → Broadcasting → Auto Tuning → Cable Search Option → ENTER E Auto Tuning Cable Search Option - The displayed image may differ depending on the model. - Availab...

57 Aerial MENU m → Broadcasting → Aerial → ENTER E Broadcasting Aerial - The displayed image may differ depending on the model. - Available in TV mode only. Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the LED dis...

58 Channel List MENU m → Broadcasting → Channel List → ENTER E Broadcasting Channel List - The displayed image may differ depending on the model. - Available in TV mode only. Register or delete channels. Add favourites channels or rename analogue channels.Select a desired channel from Channel List t...

59 All Shows all channels. Analog Shows analogue channels. Digital Shows digital channels.

60 Guide MENU m → Broadcasting → Guide → ENTER E Broadcasting Guide - The displayed image may differ depending on the model. - Available in TV mode only. The Guide provides an overview of each digital channel's programme lineup. You can check the programme schedules and set up a Schedule Manager . ―...

62 Edit Channel MENU m → Broadcasting → Edit Channel → ENTER E Broadcasting Edit Channel - The displayed image may differ depending on the model. - Available in TV mode only. Manage channels saved on your TV. Delete channels, re-register deleted channels or rename analogue channels. ― Conveniently c...

63 Editing registered channels Pressing TOOLS from the Edit Channel page displays the following menu items. Provided functions may vary depending on the broadcast signal. Option Name Operations Aerial Select either Air or Cable as digital channel mode. Category Channels saved on your TV are classifi...

64 Edit Favorites MENU m → Broadcasting → Edit Favorites → ENTER E Broadcasting Edit Favorites - The displayed image may differ depending on the model. - Available in TV mode only. Creating a favourites channel list Set frequently viewed channels as favourites channels. Favourites channels are indic...

65 Viewing channels saved under a favourites channel list ― Favourites channel lists are only displayed if they have been created previously. When changing the channel using the channel buttons, channels saved in favourites channel lists can only be accessed. 1 Select Channel List from the Broadcast...

66 Renaming a favourites channel list Change the name of a favourites channel list, if required. 1 Select Change Fav. from the screen to change the favourites channel list on the right to another desired favourites channel list. 2 Press TOOLS on the screen. Sub-menu items are displayed. 3 Select Ren...

67 Channel Settings MENU m → Broadcasting → Channel Settings → ENTER E Channel Settings Country (Area) Manual Tuning Fine Tune Transfer Channel List Delete CAM Operator Profile - The displayed image may differ depending on the model. - Available in TV mode only. Country (Area) Select your country so...

68 Fine Tune (analogue channels only)If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. ― T...

69 Subtitle MENU m → Broadcasting → Subtitle → ENTER E · · Subtitle Subtitle Subtitle Mode Subtitle Language Primary Subtitle Secondary Subtitle - The displayed image may differ depending on the model. - Available in TV mode only. Configures the subtitle options. Subtitle Show subtitles. • Subtitle ...

70 Audio Options MENU m → Broadcasting → Audio Options → ENTER E Audio Options Audio Language Audio Format Audio Description - The displayed image may differ depending on the model. - Available in TV mode only. Audio Language (for digital broadcasts)Change the default value for audio languages. • Pr...

71 Programme Rating Lock MENU m → Broadcasting → Programme Rating Lock → ENTER E Broadcasting Programme Rating Lock - The displayed image may differ depending on the model. - Available in TV mode only. The Programme Rating Lock blocks programmes with ratings higher than those desired. This is useful...

72 Digital Text MENU m → Broadcasting → Digital Text → ENTER E Broadcasting Digital Text - The displayed image may differ depending on the model. - Available in TV mode only. Digital Text Enable or disable the MHEG function. ― The MHEG function is enabled only in countries where it is supported. • D...

73 Teletext Language MENU m → Broadcasting → Teletext Language → ENTER E Broadcasting Teletext Language - The displayed image may differ depending on the model. - Available in TV mode only. Teletext Language Use this to set the teletext language. ― Availability depends on the specific model and area...

74 Common Interface MENU m → Broadcasting → Common Interface → ENTER E Broadcasting Common Interface - The displayed image may differ depending on the model. - Available in TV mode only. CI Menu Enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. CAM ...

75 Channel Lock MENU m → Broadcasting → Channel Lock → ENTER E Broadcasting Channel Lock - The displayed image may differ depending on the model. - Available in TV mode only. Prevent your children from accessing harmful content by locking channels. • On / Off ― This option is available when the inpu...

76 Network Chapter 07 Network Status MENU m → Network → Network Status → ENTER E You can check the current network status. ***.***.***. ***.***.***. ***.***.***. ***.***.***. ** : ** : ** : ** : ** : ** AP0000 Network Status Your wireless network is set up and ready to use. Ready to play your busine...

77 Network Setting (Wireless) Connecting to a Wireless Network Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly. ― Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP...

78 6 When done, use the down arrow button to move the cursor to Done , and then press E . The network connection screen appears and the verification process starts. ― This product cannot connect to the Internet via Soft AP (Wi-Fi Hotspot) or Wi-Fi Direct . 7 When the connection has been verified, th...

82 AllShare Settings MENU m → Network → AllShare Settings → ENTER E Shows a list of mobile phones or connected devices which have been set up to use the AllShare Play function with this product. • Content Sharing Using the AllShare Play Function An alarm window appears informing you that media conte...

83 Applications Chapter 08 Source List MENU m → Applications → Source List → ENTER E Source TV HDMI1 HDMI2 AV USB - The displayed image may differ depending on the model. Source allows you to select a variety of sources and change source device names. You can display the screen of a source device co...

84 MagicInfo MENU m → Applications → MagicInfo → ENTER E Applications MagicInfo - The displayed image may differ depending on the model. MagicInfo is a business solution that allows the product to be used as a signage (advertising media). Using the solution, play image and video files from the inter...

85 - Press HOME or MagicInfo Player I on the remote control to access the application more quickly. - The displayed image may differ depending on the model. Schedule Play configured schedules. Available features in the MagicInfo page The MagicInfo list page provides the following features. • Device ...

86 Settings Settings Default Storage Repeat Mode Picture Size Display Duration Safely Remove USB Device Reset Settings Internal One Select the storage location that you want to download scheduled channels from the network to. Close - The displayed image may differ depending on the model. Default Sto...

87 MagicInfo Express Chapter 09 Use the USB or DVD that came with the product to install the software. The latest software updates may differ from the originals included at time of purchase. Download the latest version of the MagicInfo Express software and manual at: http://www.samsung.com/displayso...

88 Play photos, videos or music saved on a storage device.Play a variety of content using the following methods. • Using a USB device: Play media content such as videos, photos and music from a USB device. • Connecting a storage device: Play media content saved on a storage device such as a smartpho...

89 Compatible devices with media play • Some USB digital cameras, smartphones and audio devices may not be compatible with the product. • Media play is only compatible with USB MSC devices. • MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb ...

90 Using a USB device Connecting a USB device 1 Turn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 The New device connected. page automatically appears as soon as a USB device connects to the product. ― ...

91 Menu items in the media content list page Option Name Operations Photos Videos Music Slide Show Start a slideshow. ― This menu item is not available if Sort by is set to Folder . c Encoding Select an encoding language if the title of media content appears corrupted. c Play Selected Select and pla...

92 Available buttons and features during photo playback Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. • Previous / Next View the previous or next photo. • Start Slide Show / Stop Slide Show Start or stop a slideshow. Using a slideshow, ...

94 Available buttons and features during music playback Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. • Pause / Play Pause or play music. • Rewind / Fast Forward Rewind or fast forward music. Speed up playback up to 3x, if required. To ...

95 Supported Subtitle and Media play file formats Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.srt) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.ass) • Powerdivx (.psb) • XsubContainer: AVI • SubStation Alpha...

96 Supported music file formats File Extension *.aac, *.flac, *.m4a, *.mid, *.midi,*.mp3, *.mpa, *.ogg, *.wav, *.wma Supported Video Formats • Video content will not play, or not play correctly, if there is an error in the content or the container. • Sound or video may not work if the contents have ...

99 System Chapter 11 Setup MENU m → System → Setup → ENTER E System Setup Menu Language Time Eco Solution Auto Protection Time Screen Burn Protection Ticker English Off Off - The displayed image may differ depending on the model. Initial settings (Setup) After powering on the product for the first t...

101 Menu Language MENU m → System → Menu Language → ENTER E System Menu Language English - The displayed image may differ depending on the model. Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on ...

102 Time MENU m → System → Time → ENTER E Time Clock Sleep Timer On Timer Off Timer Holiday Management MagicInfo On/Off Timer Off - The displayed image may differ depending on the model. You can configure Clock . You can also set the product to automatically turn on or off at a specified time using ...

103 Sleep Timer Automatically shuts off the product after a preset period of time.( Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min ) ― Use the up and down arrows to select a period of time, and then press E . To cancel Sleep Timer , select Off . On Timer Set On Timer so that your produ...

105 Time Clock Sleep Timer On Timer Off Timer Holiday Management MagicInfo On/Off Timer Off - The displayed image may differ depending on the model. Off Timer Set the off timer ( Off Timer ) by making a selection from one of the seven options. ( Off Timer1 ~ Off Timer7 ) ― You must set the clock bef...

106 Time Clock Sleep Timer On Timer Off Timer Holiday Management MagicInfo On/Off Timer Off - The displayed image may differ depending on the model. MagicInfo On/Off Timer View the on/off timer settings configured in the MagicInfo Express tool. • On Timer - Setup : View the days of the week specifie...

107 Eco Solution MENU m → System → Eco Solution → ENTER E Eco Solution Energy Saving Eco Sensor No Signal Power Off Auto Power Off Off Off 15 min On - The displayed image may differ depending on the model. Energy Saving Reduce the power consumption by adjusting the screen brightness.Selecting Pictur...

108 Eco Solution Energy Saving Eco Sensor No Signal Power Off Auto Power Off Off Off 15 min On - The displayed image may differ depending on the model. No Signal Power Off Save power by turning the device off when no signal is received from any source. • Off / 15 min / 30 min / 60 min ― Disabled whe...

110 Screen Burn Protection MENU m → System → Screen Burn Protection → ENTER E Screen Burn Protection Pixel Shift Timer Immediate display Side Grey Off Off Off Off - The displayed image may differ depending on the model. To reduce the possibility of screen burn, this unit is equipped with Pixel Shift...

111 Screen Burn Protection Pixel Shift Timer Immediate display Side Grey Off Off Off Off - The displayed image may differ depending on the model. Timer You can set the timer for Screen Burn Protection . The Timer feature stops automatically after a specified period of time. Timer • Off • Repeat : Di...

112 Start Time Set the start time to activate the screen protection function. ― The option is enabled when Interval is selected for Timer . End Time Set the end time to deactivate the screen protection function. ― The option is enabled when Interval is selected for Timer .

113 Screen Burn Protection Pixel Shift Timer Immediate display Side Grey Off Off Off Off - The displayed image may differ depending on the model. Immediate display Select the screen saver you want to display immediately. • Off / Pixel / Rolling bar / Fading screen Side Grey When the screen is set to...

114 Ticker MENU m → System → Ticker → ENTER E · · · · · Ticker Ticker Off - The displayed image may differ depending on the model. - The Ticker function is only available when Menu Language is set to English . Ticker Input text while a video or image is displayed and display the text on the screen. ...

115 Source AutoSwitch Settings MENU m → System → Source AutoSwitch Settings → ENTER E · · · Source AutoSwitch Settings Source AutoSwitch Primary Source Recovery Primary Source Secondary Source Off Off All HDMI1 - The displayed image may differ depending on the model. Turning on the display with Sour...

116 General MENU m → System → General → ENTER E General Game Mode Auto Power Safety Lock Button Lock USB Auto Play Lock Standby Control Lamp Schedule Off Off Off Off Off Auto Off - The displayed image may differ depending on the model. Game Mode When connecting to a game console such as PlayStation™...

117 General Button Lock USB Auto Play Lock Standby Control Lamp Schedule OSD Display Off Off Auto Off - The displayed image may differ depending on the model. Button Lock It sets safe lock function. • Off / On This menu can be used to lock the buttons on the product.Only the remote control can contr...

118 General Button Lock USB Auto Play Lock Standby Control Lamp Schedule OSD Display Off Off Auto Off - The displayed image may differ depending on the model. Lamp Schedule Adjusts the luminance to a user-specified value at a specified time. • Off / On OSD Display Displays or hides a menu item on th...

119 Change PIN MENU m → System → Change PIN → ENTER E System Change PIN - The displayed image may differ depending on the model. The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN . Reenter the same 4 digits in Confirm New PIN . When the Confirm screen ...

120 Clone Product MENU m → System → Clone Product → ENTER E Clone Product Clone to USB Clone From USB - The displayed image may differ depending on the model. Export the product settings to a USB device or load the settings via a USB device.This option is useful when assigning the same settings to s...

121 Reset All MENU m → System → Reset All → ENTER E System Reset All - The displayed image may differ depending on the model. This option returns all the current settings for a display to the default factory settings. DivX ® Video On Demand MENU m → System → DivX ® Video On Demand → ENTER E System D...

122 Support Chapter 12 Software Update MENU m → Support → Software Update → ENTER E The Software Update menu lets you upgrade your product software to the latest version. ― Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after comple...

123 Contact Samsung MENU m → Support → Contact Samsung → ENTER E View this information when your product does not work properly or when you want to upgrade the software.You can find information regarding our call centres and how to download products and software. ― Contact Samsung and find the produ...

124 Troubleshooting Guide Chapter 13 Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Testing the Product Check if your product is operating n...

125 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product ...

127 Screen issue The screen display does not look normal. Encoded video content may cause the display to appear corrupted in scenes featuring fast moving objects such as in a sports event or action video. Low signal level or low picture quality may cause the display to appear corrupted. This does no...

129 Sound issue There is an echo sound coming from the speakers. When the built-in speakers are turned on, the built-in and external speakers make sound simultaneously. This may cause an echo effect due to different decoding rates between these two types of speakers. If this is the case, set Speaker...

130 Other issue The PIP menu is not available. The menu is enabled or disabled depending on the Source mode. When I try to change the PC resolution, a message The defined resolution is not supported. appears. The message The defined resolution is not supported. appears if the input source resolution...

133 Specifications Chapter 14 - Size - Display area H V - Dimensions ( W x H x D) W H D General Model Name RM40D RM48D Panel Size 40 CLASS (40.0 inches / 101 cm) 48 CLASS (47.6 inches / 121 cm) Display area 885.6 mm (H) x 498.15 mm ( V ) 34.87 inches (H) x 19.61 inches ( V ) 1054.08 mm (H) x 592.92 ...

135 Power Consumption Normal Operation Stand-by Typical Rating Max Power Indicator Off On Power Consumption RM40D 37 W 89 W 98 W 0.5 W RM48D 45 W 104 W 114 W ― The displayed power consumption level can vary in different operating conditions or when settings are changed. ― SOG(Sync On Green) is not s...

136 Preset Timing Modes ― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select...

138 Appendix Chapter 15 Contact SAMSUNG WORLD WIDE Web site: http://www.samsung.com/displaysolutions/signagetv ― If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) CANADA 1-800-SAMSUNG (726...

139 LATIN AMERICA COSTA RICA 0-800-507-726700-800-1-SAMSUNG (726-7864) DOMINICA 1-800-751-2676 ECUADOR 1-800-10-726701-800-SAMSUNG (72-6786) EL SALVADOR 800-6225 GUATEMALA 1-800-299-00131-800-299-0033 HONDURAS 800-27919267800-2791-9111 JAMAICA 1-800-234-72671-800-SAMSUNG (726-7864) MEXICO 01-800-SAM...

141 EUROPE HUNGARY 06 40 985 985 ITALIA 800 154 154  LATVIA 80007267 LITHUANIA 8800 77777 LUXEMBURG 2601 3710 MONTENEGRO 20405888 NETHERLANDS 0900-SAMSUNG (726-7864) NORWAY 815 56480 POLAND 0 801 172 678 *(801 1Samsung) PORTUGAL 808207267 ROMANIA 08008 726 78 64  SERBIA 381 11 321 6899 0700 726 7864...

143 CHINA CHINA 400-610-5858 HONG KONG +852-3698-4688 MACAU 0800 333 S.E.A AUSTRALIA 1800 91 92 93 INDONESIA 0800-112-8888 JAPAN 0120-363-905 MALAYSIA 1800 88 3399 MYANMAR +951 2399 888 NEW ZEALAND 0800726786 option 3 PHILIPPINES 632 214 77 18 SINGAPORE +65 64150798 TAIWAN 0809-005-237 THAILAND +662...

144 S.W.A BANGLADESH 0800-112-8888 INDIA 1800 3010 8282 SRI LANKA 00941175405400094115900000 MENA ALGERIA 021 36 11 00 BAHRAIN 8000-4726 EGYPT 08000-726786 and 16580 IRAN 021-8255 JORDAN 06 5777441 (B2B) KUWAIT 183-2255 (183-CALL) MOROCCO + 212 522586969 OMAN 800-SAMSUNG (726-7864) PAKISTAN 0800-Sam...

146 AFRICA SENEGAL 800-00-0077 SOUTH AFRICA 860 726 222 SUDAN 1969 TANZANIA 0800 755 755 UGANDA 0800 300 300 ZAMBIA 211350370

147 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ...

148 WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should...

149 Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. - The number of sub-pixels by panel...

150 Preventing afterimage burn-in ― The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. • Powering Off, Screen Saver and Power S...

151 Licence Manufactured under licence from Dolby Laboratories.Dolby and the double-D symbol are trademarks of Dolby Laboratories. Ⓡ 2.0 Channel Manufactured under licence under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Sym...

152 Terminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method.- ScanningScanning r...