Samsung NK30CB600WCGAA - Manuals

7 Installation R equir ement s Installation Requirements Mounting Height CAUTION • Be sure to check the mounting height before installing the product. • The mounting height is measured from the top of the range to the upper cabinets. The mounting height for an electric cooking surface is measured fr...

8 Installation R equir ement s Installation Requirements Venting Methods Smoke is exhausted to the outside through a special pipe connected to the hood. (Recirculating) Wall Venting Roof Venting B A A. DeflectorB. 6" (15.2 cm) A. Wall capB. 6" (15.2 cm) A. Roof capB. 6" (15.2 cm) B A B A...

9 Installation R equir ement s Sub-Parts List 6 × 130 mm Screw Anchor (2) 6 × 30 mm Screw Anchor (5) 4 × 10 mm Hood Fixing Screw (10) 22 mm Washer (4) NOTE Install the product by using the included accessories and materials appropriately and according to the installation environment and conditions. ...

10 Installation R equir ement s Installation Requirements Making a hole in the furniture Duct hole guide_Op.1Cabinet floor drilling work: hood exhaust outlet (damper) cutting work Rear (Wall) Front Duct Hole Furniture's Center Line Max 13 / 64 " (0.5 cm) Min 8 21 / 32 " (22.0 cm) Min 6 19 / ...

11 Installation Installation 3. Check the position for fixing the hood mounting bracket. 130 mm Screw Anchors (2 pcs.) or 30 mm Screw Anchors (2 pcs.) and Washers (2 pcs.) 4. Fix the hood mounting bracket horizontally on the wall where the hood is to be installed using screw anchors, hood mounting b...

12 Installation Installation 7. Remove the cover by loosening the screw on the PCB cover. 8. Connect the connector of the electric damper wire and the PCB connector. NOTE Insert the wire into the hole at the top left corner. 9. Assemble the PCB cover using a screw. NOTE Put the connected connector i...

13 Installation 6" (15.2 cm) 12. Fix the duct (6" (15.2 cm)) to the hood outlet and the vent on the wall, respectively, with tape. CAUTION • Ensure the exhaust outlet diameter and duct diameter match, and then connect the duct to the wall outlet. • If the duct and the wall outlet have differ...

14 Installation Installation 15. Assemble with 10 mm hood fixing screws from both sides. Upper Duct Lower Duct 16. Assemble the lower duct cover to the hood. Magnets on the upper duct cover hold the lower duct cover in place. NOTE The magnet must be attached to the upper line of the lower duct. 13. ...

16 Installation Installation Installing the Recirculation Kit NOTE Same process until No. 14 Duct Cover Mounting Bracket Deflector Assembly screws 1. Assemble the air deflector with the duct cover mounting bracket with the four assembly screws provided with the Recirculation Kit. B A D C 2. Measure ...

17 Installation 9. Rotate the upper duct as in the picture. 10. Attach each magnet to the inner surface of the upper duct cover overlapping with the lower duct cover, and assemble the upper duct cover in a way that it fits the mounting bracket. WARNING Installation with screws or brackets other than...

20 R ange Hood De scrip tion / O v ervie w Range Hood Description Range Hood Overview Button panel 02 03 01 01 Power button • Short press: Turns the device ON/OFF. 02 Mode button • Short press: Changes the operation mode. (Low Medium High (Boost)) • 5 second press: Deactivates/activates the Wi-Fi – ...

21 Using the R ange Hood Activates/Deactivates Boost mode Boost mode is a function that allows powerful exhaust for a short time. 1. Press the button for 10 seconds. 2. Boost mode has been added. Boost mode (Max 630 CFM) is available. 3. LEDs on the button are sequentially filled while the Boost mod...

22 Using the R ange Hood Using the Range Hood Makeup Air • When using ventilation systems with greater than the specified CFM of air movement, review local building codes as they may require makeup air systems. Consult an HVAC professional for the specific requirements for your area as the CFM requi...

24 Using the R ange Hood Using the Range Hood Bixby • Bixby is the name of Samsung's artificial intelligence solution and it makes it possible to control the product by voice. • To use the voice recognition function, you need to connect the SmartThings app and the product on your smartphone. • For m...

25 Cleaning and Maint enanc e Cleaning the Filters 1. Please remove the filter at the bottom of the hood. CAUTION When separating the filter, use both hands to separate it carefully so that it does not drop. 2. Soak the filter in lukewarm water with neutral detergent for about 10 minutes, then rinse...

26 Smar tThing s app SmartThings app Checking the power connections Check if the power is connected to the product and the access point. Setting up and connecting to a Wi-Fi access point using your smartphone 1. To connect the product to a Wi-Fi network, turn on Wi-Fi in "Settings > Wi-Fi"...

28 Tr ouble shoo ting Troubleshooting Troubleshooting If you suspect there is a failure while using the product, check the following before requesting service from the service center. When you request service, you will be charged for the visit and diagnosing the symptoms even if the product is not b...

29 W arranty (U SA) Code Description Action C446 BLDC Motor or Inverter PBA is not working Press the POWER button to restart the product.If the problem persists, disconnect the power plug for more than 30 seconds.Allow the product to cool and restart it.If it is not resolved, please contact a Samsun...

31 W arranty (C ANAD A) Warranty (CANADA) SAMSUNG RANGE HOOD LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics Canada, Inc. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMS...

32 W arranty (C ANAD A) Warranty (CANADA) Some provinces or territories may or may not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you ...